Estudo e aplicação de conversor multinível híbrido com uma única fonte CC
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/8526 |
Resumo: | This study proposes a modulation strategy based on geometric approach for a hybrid multilevel converter with single dc voltage source. This multilevel converter is composed of a three-phase three-level multilevel converter with neutral-point-clamped (NPC) connected in series with single-phase three-level full-bridge cells. The NPC converter operates at the fundamental frequency of the reference signals, and the switching angle of the switches is calculated to ensure that the fundamental component of the NPC converter output voltage is equal to the fundamental component of the reference voltage of the entire hybrid multilevel converter. Therefore, the full-bridge cells, which operate with pulse width modulation (PWM), do no process active power and they can be supplied by capacitors. However, to guarantee that the full-bridge cells operate in the linear region a common mode voltage is added on its reference signals. This work uses a systematic methodology for obtaining the region of possible values of common mode voltage to ensure the operation of the full-bridge cells in the linear region, it being possible to maintain the DC bus voltages regulated without distorting the output line-to-line voltages. Moreover, this study applies the hybrid multilevel converter with single DC source as input stage (rectifier) of medium-voltage variable speed drive systems, becoming an alternative for applications that require energy regeneration, high efficiency and input power factor as well as a satisfactory dynamic response. Simulation and experimental results are included to validate the analyzes presented in this work. |
id |
UFSM-20_f410ae0eb5b800cd22c74c4f243b5dfc |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/8526 |
network_acronym_str |
UFSM-20 |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
3913 |
spelling |
2017-06-052017-06-052013-03-07VARGAS, Tadeu. Study and application of hybrid multilevel converter with single DC source. 2013. 91 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2013.http://repositorio.ufsm.br/handle/1/8526This study proposes a modulation strategy based on geometric approach for a hybrid multilevel converter with single dc voltage source. This multilevel converter is composed of a three-phase three-level multilevel converter with neutral-point-clamped (NPC) connected in series with single-phase three-level full-bridge cells. The NPC converter operates at the fundamental frequency of the reference signals, and the switching angle of the switches is calculated to ensure that the fundamental component of the NPC converter output voltage is equal to the fundamental component of the reference voltage of the entire hybrid multilevel converter. Therefore, the full-bridge cells, which operate with pulse width modulation (PWM), do no process active power and they can be supplied by capacitors. However, to guarantee that the full-bridge cells operate in the linear region a common mode voltage is added on its reference signals. This work uses a systematic methodology for obtaining the region of possible values of common mode voltage to ensure the operation of the full-bridge cells in the linear region, it being possible to maintain the DC bus voltages regulated without distorting the output line-to-line voltages. Moreover, this study applies the hybrid multilevel converter with single DC source as input stage (rectifier) of medium-voltage variable speed drive systems, becoming an alternative for applications that require energy regeneration, high efficiency and input power factor as well as a satisfactory dynamic response. Simulation and experimental results are included to validate the analyzes presented in this work.Este estudo propõe uma estratégia de modulação baseada em abordagem geométrica para um conversor multinível híbrido com única fonte de tensão contínua. Esse conversor multinível é formado por um conversor multinível trifásico três níveis com ponto neutro grampeado (NPC Neutral Point Clamped) conectado em série com células em ponte completa monofásicas de três níveis. O conversor NPC opera na frequência fundamental dos sinais de referência, e o ângulo de comutação dos interruptores é calculado para garantir que a componente fundamental da tensão de saída do conversor NPC seja igual à componente fundamental da tensão de referência de todo o conversor multinível híbrido. Dessa forma, as células em ponte completa, que operam com modulação por largura de pulso, não processam potência ativa e podem ser alimentadas por capacitores. Contudo, para que as células em ponte completa operem na região linear é adicionada uma tensão de modo comum nos seus sinais de referência. Esse trabalho utiliza uma metodologia sistemática para obtenção da região de possíveis valores de tensão de modo comum que garantem a operação das células em ponte completa na região linear, sendo possível manter as tensões nos capacitores dos barramentos CC reguladas sem distorcer as tensões de linha de saída. Ainda, esse trabalho aplica o conversor multinível híbrido com uma única fonte de tensão contínua como estágio de entrada (retificador) de sistemas de acionamento de velocidade variável para motores de média tensão, sendo uma alternativa para aplicação que demandam regeneração de energia, elevado rendimento e fator de potência de entrada, assim como uma resposta dinâmica satisfatória. Resultados de simulação e experimentais são incluídos para validar as análises apresentadas nesse trabalho.Conselho Nacional de Desenvolvimento Científico e Tecnológicoapplication/pdfporUniversidade Federal de Santa MariaPrograma de Pós-Graduação em Engenharia ElétricaUFSMBREngenharia ElétricaConversores multiníveisÚnica fonte CCAbordagem geométricaMultilevel convertersSingle DC sourceGeometric approachCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAEstudo e aplicação de conversor multinível híbrido com uma única fonte CCStudy and application of hybrid multilevel converter with single DC sourceinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisRech, Cassianohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4767540A9Pinheiro, Humbertohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4765248J6Pinheiro, José Reneshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787136P4Mussa, Samir Ahmadhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4790519Z1http://lattes.cnpq.br/9643932029883031Vargas, Tadeu30040000000740030030050050030064098d57-ec9e-498c-823c-7d3c3559e3535ffcbf32-67eb-4b48-9591-bce39b6e44882fabef7a-64f0-4823-a722-869369fe167ed18bd681-bab1-42a2-8e9f-0412560790a1e858c076-87d1-49cb-987d-0a5e55353e97info:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMORIGINALVARGAS, TADEU.pdfapplication/pdf2939633http://repositorio.ufsm.br/bitstream/1/8526/1/VARGAS%2c%20TADEU.pdfbc4000e061afcf478c814e22a8620a08MD51TEXTVARGAS, TADEU.pdf.txtVARGAS, TADEU.pdf.txtExtracted texttext/plain150046http://repositorio.ufsm.br/bitstream/1/8526/2/VARGAS%2c%20TADEU.pdf.txt91ae8dee359f59810a092e011965d285MD52THUMBNAILVARGAS, TADEU.pdf.jpgVARGAS, TADEU.pdf.jpgIM Thumbnailimage/jpeg4835http://repositorio.ufsm.br/bitstream/1/8526/3/VARGAS%2c%20TADEU.pdf.jpg1149bd48daa2fccfed0848df7f604929MD531/85262022-08-11 13:01:04.308oai:repositorio.ufsm.br:1/8526Repositório Institucionalhttp://repositorio.ufsm.br/PUBhttp://repositorio.ufsm.br/oai/requestopendoar:39132022-08-11T16:01:04Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.por.fl_str_mv |
Estudo e aplicação de conversor multinível híbrido com uma única fonte CC |
dc.title.alternative.eng.fl_str_mv |
Study and application of hybrid multilevel converter with single DC source |
title |
Estudo e aplicação de conversor multinível híbrido com uma única fonte CC |
spellingShingle |
Estudo e aplicação de conversor multinível híbrido com uma única fonte CC Vargas, Tadeu Conversores multiníveis Única fonte CC Abordagem geométrica Multilevel converters Single DC source Geometric approach CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
title_short |
Estudo e aplicação de conversor multinível híbrido com uma única fonte CC |
title_full |
Estudo e aplicação de conversor multinível híbrido com uma única fonte CC |
title_fullStr |
Estudo e aplicação de conversor multinível híbrido com uma única fonte CC |
title_full_unstemmed |
Estudo e aplicação de conversor multinível híbrido com uma única fonte CC |
title_sort |
Estudo e aplicação de conversor multinível híbrido com uma única fonte CC |
author |
Vargas, Tadeu |
author_facet |
Vargas, Tadeu |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Rech, Cassiano |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4767540A9 |
dc.contributor.referee1.fl_str_mv |
Pinheiro, Humberto |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4765248J6 |
dc.contributor.referee2.fl_str_mv |
Pinheiro, José Renes |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787136P4 |
dc.contributor.referee3.fl_str_mv |
Mussa, Samir Ahmad |
dc.contributor.referee3Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4790519Z1 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/9643932029883031 |
dc.contributor.author.fl_str_mv |
Vargas, Tadeu |
contributor_str_mv |
Rech, Cassiano Pinheiro, Humberto Pinheiro, José Renes Mussa, Samir Ahmad |
dc.subject.por.fl_str_mv |
Conversores multiníveis Única fonte CC |
topic |
Conversores multiníveis Única fonte CC Abordagem geométrica Multilevel converters Single DC source Geometric approach CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
dc.subject.eng.fl_str_mv |
Abordagem geométrica Multilevel converters Single DC source Geometric approach |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
description |
This study proposes a modulation strategy based on geometric approach for a hybrid multilevel converter with single dc voltage source. This multilevel converter is composed of a three-phase three-level multilevel converter with neutral-point-clamped (NPC) connected in series with single-phase three-level full-bridge cells. The NPC converter operates at the fundamental frequency of the reference signals, and the switching angle of the switches is calculated to ensure that the fundamental component of the NPC converter output voltage is equal to the fundamental component of the reference voltage of the entire hybrid multilevel converter. Therefore, the full-bridge cells, which operate with pulse width modulation (PWM), do no process active power and they can be supplied by capacitors. However, to guarantee that the full-bridge cells operate in the linear region a common mode voltage is added on its reference signals. This work uses a systematic methodology for obtaining the region of possible values of common mode voltage to ensure the operation of the full-bridge cells in the linear region, it being possible to maintain the DC bus voltages regulated without distorting the output line-to-line voltages. Moreover, this study applies the hybrid multilevel converter with single DC source as input stage (rectifier) of medium-voltage variable speed drive systems, becoming an alternative for applications that require energy regeneration, high efficiency and input power factor as well as a satisfactory dynamic response. Simulation and experimental results are included to validate the analyzes presented in this work. |
publishDate |
2013 |
dc.date.issued.fl_str_mv |
2013-03-07 |
dc.date.accessioned.fl_str_mv |
2017-06-05 |
dc.date.available.fl_str_mv |
2017-06-05 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
VARGAS, Tadeu. Study and application of hybrid multilevel converter with single DC source. 2013. 91 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2013. |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/8526 |
identifier_str_mv |
VARGAS, Tadeu. Study and application of hybrid multilevel converter with single DC source. 2013. 91 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2013. |
url |
http://repositorio.ufsm.br/handle/1/8526 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.cnpq.fl_str_mv |
300400000007 |
dc.relation.confidence.fl_str_mv |
400 300 300 500 500 300 |
dc.relation.authority.fl_str_mv |
64098d57-ec9e-498c-823c-7d3c3559e353 5ffcbf32-67eb-4b48-9591-bce39b6e4488 2fabef7a-64f0-4823-a722-869369fe167e d18bd681-bab1-42a2-8e9f-0412560790a1 e858c076-87d1-49cb-987d-0a5e55353e97 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Elétrica |
dc.publisher.initials.fl_str_mv |
UFSM |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharia Elétrica |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
bitstream.url.fl_str_mv |
http://repositorio.ufsm.br/bitstream/1/8526/1/VARGAS%2c%20TADEU.pdf http://repositorio.ufsm.br/bitstream/1/8526/2/VARGAS%2c%20TADEU.pdf.txt http://repositorio.ufsm.br/bitstream/1/8526/3/VARGAS%2c%20TADEU.pdf.jpg |
bitstream.checksum.fl_str_mv |
bc4000e061afcf478c814e22a8620a08 91ae8dee359f59810a092e011965d285 1149bd48daa2fccfed0848df7f604929 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
|
_version_ |
1801223779782754304 |