Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Ciência Florestal (Online) |
Texto Completo: | https://periodicos.ufsm.br/cienciaflorestal/article/view/18470 |
Resumo: | http://dx.doi.org/10.5902/1980509818470 Mimosa tenuiflora is an abundant species in the Brazilian semi-arid region which offers potential for the tannin production but need research indicating the best ways of its application. This study aimed to evaluate the quality of tannin from Mimosa tenuiflora for the formaldehyde tannin adhesive production with the plant collection period. The bark collections were carried out in the months of August and December of 2008 and in April and August of 2009, in Lameirão farm, in municipality of Santa Terezinha, Paraíba state, Brazil, being collected 10 plants per period, totaling 40 plants. The barks were taken from the trunk and branches up to 3.0 cm in diameter, ground into mill knives and classified in sieves, having been employed for the extraction of tannins, particles less than 1.0 x 2.0 cm and superior than 0.2 x 0.2 cm. The extract tannic for the adhesives production was extracted in distilled water in an autoclave at boiling temperature of water at atmospheric pressure, concentrated by evaporation and kept in an oven at 70 ± 3 °C until the complete evaporation of moisture, and was evaluated the total solid content, Stiasny’s index and condensed tannin content in the bark by collection period. To produce the adhesives, an acid sulphitation of tannins was obtained. There was influence of period of collection of the plants in condensed tannin contents. It was found in adhesives produced with the tannins of Mimosa tenuiflora, solid content values, similar to those of Acacia mearnsii, no significant difference between collection periods for the solid content and gelatinization time of adhesives was obtained. However, the collection period influenced the pH and viscosity of adhesives. The adhesives produced showed high viscosity, indicating the need for research to improve the adhesives produced. |
id |
UFSM-6_b441c3721194889b6efffa153d5aa2e8 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/18470 |
network_acronym_str |
UFSM-6 |
network_name_str |
Ciência Florestal (Online) |
repository_id_str |
|
spelling |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVEQUALIDADE DOS TANINOS DE JUREMA-PRETA (Mimosa tenuiflora) PARA A PRODUÇÃO DE ADESIVO TANINO FORMALDEÍDOspecies from Caatingacondensed tanninscharacteristics of adhesive.espécie da Caatingataninos condensadoscaracterísticas dos adesivos.http://dx.doi.org/10.5902/1980509818470 Mimosa tenuiflora is an abundant species in the Brazilian semi-arid region which offers potential for the tannin production but need research indicating the best ways of its application. This study aimed to evaluate the quality of tannin from Mimosa tenuiflora for the formaldehyde tannin adhesive production with the plant collection period. The bark collections were carried out in the months of August and December of 2008 and in April and August of 2009, in Lameirão farm, in municipality of Santa Terezinha, Paraíba state, Brazil, being collected 10 plants per period, totaling 40 plants. The barks were taken from the trunk and branches up to 3.0 cm in diameter, ground into mill knives and classified in sieves, having been employed for the extraction of tannins, particles less than 1.0 x 2.0 cm and superior than 0.2 x 0.2 cm. The extract tannic for the adhesives production was extracted in distilled water in an autoclave at boiling temperature of water at atmospheric pressure, concentrated by evaporation and kept in an oven at 70 ± 3 °C until the complete evaporation of moisture, and was evaluated the total solid content, Stiasny’s index and condensed tannin content in the bark by collection period. To produce the adhesives, an acid sulphitation of tannins was obtained. There was influence of period of collection of the plants in condensed tannin contents. It was found in adhesives produced with the tannins of Mimosa tenuiflora, solid content values, similar to those of Acacia mearnsii, no significant difference between collection periods for the solid content and gelatinization time of adhesives was obtained. However, the collection period influenced the pH and viscosity of adhesives. The adhesives produced showed high viscosity, indicating the need for research to improve the adhesives produced.http://dx.doi.org/10.5902/1980509818470A jurema-preta (Mimosa tenuiflora), espécie abundante no semiárido brasileiro, tem potencial para a produção de taninos, havendo a necessidade de pesquisas que indiquem as melhores formas de aplicação dos mesmos. Este estudo objetivou avaliar a qualidade dos taninos da jurema-preta para a produção de adesivo tanino formaldeído com o período de coleta da planta. Foram realizadas coletas de casca nos meses de agosto e dezembro de 2008 e em abril e agosto de 2009, na Fazenda Lameirão, Santa Terezinha, Paraíba, sendo coletadas 10 plantas por período, totalizando 40 plantas. As cascas foram retiradas do tronco e galhos de diâmetro de até 3,0 cm, moídas em moinho de facas e classificadas em peneiras e empregadas para a extração de taninos, partículas inferiores a 1,0 x 2,0 cm e superiores a 0,2 x 0,2 cm. Os extratos tânicos para a produção de adesivos foram extraídos em água destilada em uma autoclave na temperatura de ebulição da água à pressão atmosférica, concentrados por evaporação ao ar livre e mantidos em estufa a 70 ± 3ºC, até a completa evaporação da umidade. Foram avaliados o teor de sólidos totais, índice de Stiasny e teor de taninos condensados nas cascas. Para produzir os adesivos, foi realizada a sulfitação ácida dos taninos obtidos. Houve influência do período de coleta das plantas no teor de taninos condensados. Foi encontrado nos adesivos produzidos com os taninos de jurema-preta, valor de teor sólido semelhante aos da acácia-negra (Acacia mearnsii), não havendo diferença significativa entre os períodos de coleta para o teor sólidos e tempo de gelatinização dos adesivos. Porém, o período de coleta influenciou o pH e a viscosidade dos adesivos. Os adesivos produzidos tiveram viscosidade elevada, indicando a necessidade de pesquisas para a melhoria dos mesmos. Universidade Federal de Santa Maria2015-06-30info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.ufsm.br/cienciaflorestal/article/view/1847010.5902/1980509818470Ciência Florestal; Vol. 25 No. 2 (2015); 507-514Ciência Florestal; v. 25 n. 2 (2015); 507-5141980-50980103-9954reponame:Ciência Florestal (Online)instname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMporhttps://periodicos.ufsm.br/cienciaflorestal/article/view/18470/pdfAzevêdo, Tatiane Kelly Barbosa dePaes, Juarez BenignoCalegari, LeandroNascimento, José Wallace Barbosa doinfo:eu-repo/semantics/openAccess2018-09-12T13:36:30Zoai:ojs.pkp.sfu.ca:article/18470Revistahttp://www.ufsm.br/cienciaflorestal/ONGhttps://old.scielo.br/oai/scielo-oai.php||cienciaflorestal@ufsm.br|| cienciaflorestal@gmail.com|| cf@smail.ufsm.br1980-50980103-9954opendoar:2018-09-12T13:36:30Ciência Florestal (Online) - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE QUALIDADE DOS TANINOS DE JUREMA-PRETA (Mimosa tenuiflora) PARA A PRODUÇÃO DE ADESIVO TANINO FORMALDEÍDO |
title |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE |
spellingShingle |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE Azevêdo, Tatiane Kelly Barbosa de species from Caatinga condensed tannins characteristics of adhesive. espécie da Caatinga taninos condensados características dos adesivos. |
title_short |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE |
title_full |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE |
title_fullStr |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE |
title_full_unstemmed |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE |
title_sort |
Mimosa tenuiflora TANNIN QUALITY FOR THE PRODUCTION OF TANNIN FORMALDEHYDE ADHESIVE |
author |
Azevêdo, Tatiane Kelly Barbosa de |
author_facet |
Azevêdo, Tatiane Kelly Barbosa de Paes, Juarez Benigno Calegari, Leandro Nascimento, José Wallace Barbosa do |
author_role |
author |
author2 |
Paes, Juarez Benigno Calegari, Leandro Nascimento, José Wallace Barbosa do |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
Azevêdo, Tatiane Kelly Barbosa de Paes, Juarez Benigno Calegari, Leandro Nascimento, José Wallace Barbosa do |
dc.subject.por.fl_str_mv |
species from Caatinga condensed tannins characteristics of adhesive. espécie da Caatinga taninos condensados características dos adesivos. |
topic |
species from Caatinga condensed tannins characteristics of adhesive. espécie da Caatinga taninos condensados características dos adesivos. |
description |
http://dx.doi.org/10.5902/1980509818470 Mimosa tenuiflora is an abundant species in the Brazilian semi-arid region which offers potential for the tannin production but need research indicating the best ways of its application. This study aimed to evaluate the quality of tannin from Mimosa tenuiflora for the formaldehyde tannin adhesive production with the plant collection period. The bark collections were carried out in the months of August and December of 2008 and in April and August of 2009, in Lameirão farm, in municipality of Santa Terezinha, Paraíba state, Brazil, being collected 10 plants per period, totaling 40 plants. The barks were taken from the trunk and branches up to 3.0 cm in diameter, ground into mill knives and classified in sieves, having been employed for the extraction of tannins, particles less than 1.0 x 2.0 cm and superior than 0.2 x 0.2 cm. The extract tannic for the adhesives production was extracted in distilled water in an autoclave at boiling temperature of water at atmospheric pressure, concentrated by evaporation and kept in an oven at 70 ± 3 °C until the complete evaporation of moisture, and was evaluated the total solid content, Stiasny’s index and condensed tannin content in the bark by collection period. To produce the adhesives, an acid sulphitation of tannins was obtained. There was influence of period of collection of the plants in condensed tannin contents. It was found in adhesives produced with the tannins of Mimosa tenuiflora, solid content values, similar to those of Acacia mearnsii, no significant difference between collection periods for the solid content and gelatinization time of adhesives was obtained. However, the collection period influenced the pH and viscosity of adhesives. The adhesives produced showed high viscosity, indicating the need for research to improve the adhesives produced. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-06-30 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://periodicos.ufsm.br/cienciaflorestal/article/view/18470 10.5902/1980509818470 |
url |
https://periodicos.ufsm.br/cienciaflorestal/article/view/18470 |
identifier_str_mv |
10.5902/1980509818470 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://periodicos.ufsm.br/cienciaflorestal/article/view/18470/pdf |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.source.none.fl_str_mv |
Ciência Florestal; Vol. 25 No. 2 (2015); 507-514 Ciência Florestal; v. 25 n. 2 (2015); 507-514 1980-5098 0103-9954 reponame:Ciência Florestal (Online) instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Ciência Florestal (Online) |
collection |
Ciência Florestal (Online) |
repository.name.fl_str_mv |
Ciência Florestal (Online) - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
||cienciaflorestal@ufsm.br|| cienciaflorestal@gmail.com|| cf@smail.ufsm.br |
_version_ |
1799944129993506816 |