INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH

Detalhes bibliográficos
Autor(a) principal: Ferreira, Daniele de Alvarenga
Data de Publicação: 2012
Outros Autores: Barroso, Deborah Guerra, Silva, Mírian Peixoto Soares da, Souza, Juliana Sobreira de, Freitas, Teresa Aparecida Soares de, Carneiro, José Geraldo de Araújo
Tipo de documento: Artigo
Idioma: por
Título da fonte: Ciência Florestal (Online)
Texto Completo: https://periodicos.ufsm.br/cienciaflorestal/article/view/7553
Resumo: http://dx.doi.org/10.5902/198050987553The Toona ciliata (Australian cedar), originated from Australia showed high acclimatization in Brazil, where it found appropriate conditions for its growth, particularly in southern Bahia and throughout the southeastern region. However, the plantings presented irregular stems. Besides the seeds are a limiting resource, in result of their production seasonality and short viability period. This study aimed the evaluation of the quality of cuttings grown from 6 cm length apical, middle and basal mini-cutting positions of the sprouts of the mini-strains - from seminal origin - and the initial growth of cuttings. It was established a multi-clone mini-garden containing a total of 284 mini-strains. After cutting off the sprouts of the seedlings - to originate the mini-strains - the mini-cuttings from the above different positions were collected. At the lifting time of the rooting sector, dry mass weight of shoot and root, length, diameter, number of adventitious roots and survival data were collected. The height and diameter were monitored fortnightly, starting from 80 days after the staking of the mini-cuttings. At the end of the production cycle, the dry mass weight of shoot, the root number, the diameter and the length of root cuttings were evaluated. Thirty percent of the cuttings were transplanted to pots of 3.8 L, in the open air where the height and basal diameter, the dry mass of shoot, the leaves and the roots were measured 60 days after the transplanting. Cuttings originated from the basal mini-cuttings at the end of the lifting time of the rooting sector, showed the highest height and diameter, however no difference was pointed out regarding to the basal diameter of cuttings originated from the middle position. There were no differences related to the shoot dry mass and the adventitious root number, the dry mass weight, the total length and the diameter of the adventitious roots of cuttings in relation to the mini-cutting positions in the sprouts. The survival was high, averaging 94.7% for the apical, 96.3% for the middle and 96.6 for basal position. Sixty days after transplanting, despite the differences in the diameter and the height of the cuttings at the end of the nursery phase, no difference in the height, the diameter and the dry mass weight of shoots, the leaves and the roots as pointed out in the treatments.
id UFSM-6_c8317d7f2e1fe4a13fe2b37e77a8f69b
oai_identifier_str oai:ojs.pkp.sfu.ca:article/7553
network_acronym_str UFSM-6
network_name_str Ciência Florestal (Online)
repository_id_str
spelling INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTHInfluência da posição das miniestacas na qualidade de mudas de cedro australiano e no seu desempenho inicial no pós-plantioToona ciliateminicuttingvegetative propagationpropaguleToona ciliataminiestaquiapropagação vegetativapropágulohttp://dx.doi.org/10.5902/198050987553The Toona ciliata (Australian cedar), originated from Australia showed high acclimatization in Brazil, where it found appropriate conditions for its growth, particularly in southern Bahia and throughout the southeastern region. However, the plantings presented irregular stems. Besides the seeds are a limiting resource, in result of their production seasonality and short viability period. This study aimed the evaluation of the quality of cuttings grown from 6 cm length apical, middle and basal mini-cutting positions of the sprouts of the mini-strains - from seminal origin - and the initial growth of cuttings. It was established a multi-clone mini-garden containing a total of 284 mini-strains. After cutting off the sprouts of the seedlings - to originate the mini-strains - the mini-cuttings from the above different positions were collected. At the lifting time of the rooting sector, dry mass weight of shoot and root, length, diameter, number of adventitious roots and survival data were collected. The height and diameter were monitored fortnightly, starting from 80 days after the staking of the mini-cuttings. At the end of the production cycle, the dry mass weight of shoot, the root number, the diameter and the length of root cuttings were evaluated. Thirty percent of the cuttings were transplanted to pots of 3.8 L, in the open air where the height and basal diameter, the dry mass of shoot, the leaves and the roots were measured 60 days after the transplanting. Cuttings originated from the basal mini-cuttings at the end of the lifting time of the rooting sector, showed the highest height and diameter, however no difference was pointed out regarding to the basal diameter of cuttings originated from the middle position. There were no differences related to the shoot dry mass and the adventitious root number, the dry mass weight, the total length and the diameter of the adventitious roots of cuttings in relation to the mini-cutting positions in the sprouts. The survival was high, averaging 94.7% for the apical, 96.3% for the middle and 96.6 for basal position. Sixty days after transplanting, despite the differences in the diameter and the height of the cuttings at the end of the nursery phase, no difference in the height, the diameter and the dry mass weight of shoots, the leaves and the roots as pointed out in the treatments.http://dx.doi.org/10.5902/198050987553O cedro australiano, originário da Austrália, adaptou-se muito bem no Brasil, que apresenta condições adequadas para o seu desenvolvimento, sobretudo no sul da Bahia e em toda a região sudeste. Porém, os plantios são irregulares e as sementes são insumo limitante, por sua sazonalidade de oferta e curta viabilidade. A finalidade deste estudo foi avaliar a qualidade das mudas obtidas de miniestacas apicais, intermediárias e basais com 6 cm de comprimento oriundas de brotos de minicepas de Toona ciliata cultivadas em minijardim multiclonal em canaletões e o crescimento inicial das mudas no pós-plantio. Foi implantado um minijardim multiclonal em canaletões, contendo um total de 284 minicepas. A partir da parte aérea das mudas recepadas para formação das minicepas, foram produzidas miniestacas de diferentes posições. Na expedição do setor de enraizamento foram coletados dados de massa seca da parte aérea e do sistema radicular, comprimento, diâmetro, número de raízes adventícias e sobrevivência. A altura e diâmetro das mudas foram monitorados quinzenalmente, a partir de 80 dias, após o estaqueamento. Ao final do ciclo de produção, as mudas foram avaliadas com relação à massa seca da parte aérea e do sistema radicular, número, diâmetro e comprimento das raízes. Para avaliar as mudas após o plantio, 30 % das mudas foram transferidas para vasos de 3,8 L, onde foram avaliadas em altura e diâmetro do colo e, aos 60 dias, em massa seca do caule, folhas e raízes. As mudas provenientes das miniestacas basais, na expedição da fase de enraizamento, apresentaram os maiores valores de altura e diâmetro, não se diferenciando das intermediárias com relação ao diâmetro do colo. Não houve diferenças com relação à massa seca da parte aérea e número, massa seca, comprimento total e diâmetro das raízes adventícias das mudas em função do tipo de miniestacas. Após a transferência das mudas para a casa de vegetação, a sobrevivência foi alta, com média de 94,7 % para apicais, 96,3 % para intermediárias e 96,6 % para basais. Aos 60 dias após o plantio, apesar das diferenças observadas no diâmetro e altura das mudas ao final da fase de viveiro, não houve diferença no crescimento em altura, diâmetro e massa seca do caule, folhas e sistema radicular, em função dos tratamentos.Universidade Federal de Santa Maria2012-12-26info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.ufsm.br/cienciaflorestal/article/view/755310.5902/198050987553Ciência Florestal; Vol. 22 No. 4 (2012); 715-723Ciência Florestal; v. 22 n. 4 (2012); 715-7231980-50980103-9954reponame:Ciência Florestal (Online)instname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMporhttps://periodicos.ufsm.br/cienciaflorestal/article/view/7553/pdf_1Ferreira, Daniele de AlvarengaBarroso, Deborah GuerraSilva, Mírian Peixoto Soares daSouza, Juliana Sobreira deFreitas, Teresa Aparecida Soares deCarneiro, José Geraldo de Araújoinfo:eu-repo/semantics/openAccess2017-04-20T11:11:50Zoai:ojs.pkp.sfu.ca:article/7553Revistahttp://www.ufsm.br/cienciaflorestal/ONGhttps://old.scielo.br/oai/scielo-oai.php||cienciaflorestal@ufsm.br|| cienciaflorestal@gmail.com|| cf@smail.ufsm.br1980-50980103-9954opendoar:2017-04-20T11:11:50Ciência Florestal (Online) - Universidade Federal de Santa Maria (UFSM)false
dc.title.none.fl_str_mv INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH
Influência da posição das miniestacas na qualidade de mudas de cedro australiano e no seu desempenho inicial no pós-plantio
title INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH
spellingShingle INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH
Ferreira, Daniele de Alvarenga
Toona ciliate
minicutting
vegetative propagation
propagule
Toona ciliata
miniestaquia
propagação vegetativa
propágulo
title_short INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH
title_full INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH
title_fullStr INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH
title_full_unstemmed INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH
title_sort INFLUENCE OF THE MINICUTTING POSITION, IN THE QUALITY OF AUSTRALIAN CEDAR CUTTINGS AND THEIR INICIAL GROWTH
author Ferreira, Daniele de Alvarenga
author_facet Ferreira, Daniele de Alvarenga
Barroso, Deborah Guerra
Silva, Mírian Peixoto Soares da
Souza, Juliana Sobreira de
Freitas, Teresa Aparecida Soares de
Carneiro, José Geraldo de Araújo
author_role author
author2 Barroso, Deborah Guerra
Silva, Mírian Peixoto Soares da
Souza, Juliana Sobreira de
Freitas, Teresa Aparecida Soares de
Carneiro, José Geraldo de Araújo
author2_role author
author
author
author
author
dc.contributor.author.fl_str_mv Ferreira, Daniele de Alvarenga
Barroso, Deborah Guerra
Silva, Mírian Peixoto Soares da
Souza, Juliana Sobreira de
Freitas, Teresa Aparecida Soares de
Carneiro, José Geraldo de Araújo
dc.subject.por.fl_str_mv Toona ciliate
minicutting
vegetative propagation
propagule
Toona ciliata
miniestaquia
propagação vegetativa
propágulo
topic Toona ciliate
minicutting
vegetative propagation
propagule
Toona ciliata
miniestaquia
propagação vegetativa
propágulo
description http://dx.doi.org/10.5902/198050987553The Toona ciliata (Australian cedar), originated from Australia showed high acclimatization in Brazil, where it found appropriate conditions for its growth, particularly in southern Bahia and throughout the southeastern region. However, the plantings presented irregular stems. Besides the seeds are a limiting resource, in result of their production seasonality and short viability period. This study aimed the evaluation of the quality of cuttings grown from 6 cm length apical, middle and basal mini-cutting positions of the sprouts of the mini-strains - from seminal origin - and the initial growth of cuttings. It was established a multi-clone mini-garden containing a total of 284 mini-strains. After cutting off the sprouts of the seedlings - to originate the mini-strains - the mini-cuttings from the above different positions were collected. At the lifting time of the rooting sector, dry mass weight of shoot and root, length, diameter, number of adventitious roots and survival data were collected. The height and diameter were monitored fortnightly, starting from 80 days after the staking of the mini-cuttings. At the end of the production cycle, the dry mass weight of shoot, the root number, the diameter and the length of root cuttings were evaluated. Thirty percent of the cuttings were transplanted to pots of 3.8 L, in the open air where the height and basal diameter, the dry mass of shoot, the leaves and the roots were measured 60 days after the transplanting. Cuttings originated from the basal mini-cuttings at the end of the lifting time of the rooting sector, showed the highest height and diameter, however no difference was pointed out regarding to the basal diameter of cuttings originated from the middle position. There were no differences related to the shoot dry mass and the adventitious root number, the dry mass weight, the total length and the diameter of the adventitious roots of cuttings in relation to the mini-cutting positions in the sprouts. The survival was high, averaging 94.7% for the apical, 96.3% for the middle and 96.6 for basal position. Sixty days after transplanting, despite the differences in the diameter and the height of the cuttings at the end of the nursery phase, no difference in the height, the diameter and the dry mass weight of shoots, the leaves and the roots as pointed out in the treatments.
publishDate 2012
dc.date.none.fl_str_mv 2012-12-26
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://periodicos.ufsm.br/cienciaflorestal/article/view/7553
10.5902/198050987553
url https://periodicos.ufsm.br/cienciaflorestal/article/view/7553
identifier_str_mv 10.5902/198050987553
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://periodicos.ufsm.br/cienciaflorestal/article/view/7553/pdf_1
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
publisher.none.fl_str_mv Universidade Federal de Santa Maria
dc.source.none.fl_str_mv Ciência Florestal; Vol. 22 No. 4 (2012); 715-723
Ciência Florestal; v. 22 n. 4 (2012); 715-723
1980-5098
0103-9954
reponame:Ciência Florestal (Online)
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Ciência Florestal (Online)
collection Ciência Florestal (Online)
repository.name.fl_str_mv Ciência Florestal (Online) - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv ||cienciaflorestal@ufsm.br|| cienciaflorestal@gmail.com|| cf@smail.ufsm.br
_version_ 1799944128470974464