PARTICLEBOARDS OF AGROINDUSTRIAL WASTES
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Outros Autores: | , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Ciência Florestal (Online) |
Texto Completo: | https://periodicos.ufsm.br/cienciaflorestal/article/view/19675 |
Resumo: | The present study aimed to develop particleboards of low density with peanut shell, coconut husk fiber green (hybrid) and two-component polyurethane resin based on castor oil. The experimental panels were manufactured with particles up to 8mm and 15% polyurethane resin. The pressing was carried out at 5.0 MPa for 10 minutes at 100°C of temperature. The physical-mechanical properties of the material were determined as recommended by ABNT 14810:2006. The results demonstrated a mechanical performance that meets the recommendations established by normative ANSI A208.1-1999 and ABNT 14.810-2:2006. |
id |
UFSM-6_ca846b2e66a165b026c1425c921de773 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/19675 |
network_acronym_str |
UFSM-6 |
network_name_str |
Ciência Florestal (Online) |
repository_id_str |
|
spelling |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTESPAINEL AGLOMERADO DE RESÍDUOS AGROINDUSTRIAIScoconut fiberpeanut hullspolyurethane resinparticleboardfibra de cococasca de amendoimresina poliuretanapainéis aglomerados.The present study aimed to develop particleboards of low density with peanut shell, coconut husk fiber green (hybrid) and two-component polyurethane resin based on castor oil. The experimental panels were manufactured with particles up to 8mm and 15% polyurethane resin. The pressing was carried out at 5.0 MPa for 10 minutes at 100°C of temperature. The physical-mechanical properties of the material were determined as recommended by ABNT 14810:2006. The results demonstrated a mechanical performance that meets the recommendations established by normative ANSI A208.1-1999 and ABNT 14.810-2:2006.http://dx.doi.org/10.5902/1980509819675O presente trabalho teve como objetivo desenvolver painéis de partículas aglomeradas de baixa densidade com casca de amendoim, fibra da casca do coco-verde (híbrido) e resina poliuretana bicomponente à base de óleo de mamona. Os painéis experimentais foram fabricados com partículas de até 8 mm de comprimento e 15% de resina poliuretana. A prensagem foi realizada a 5,0 MPa, por 10 minutos, a uma temperatura de 100°C. Foram determinadas as propriedades físico-mecânicas do material, seguindo as recomendações da norma ABNT 14810:2006. Os resultados demonstraram desempenho mecânico que atende às recomendações estabelecidas pela normativa ANSI A208.1-1999 e ABNT 14.810-2:2006.Universidade Federal de Santa Maria2015-09-30info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.ufsm.br/cienciaflorestal/article/view/1967510.5902/1980509819675Ciência Florestal; Vol. 25 No. 3 (2015); 721-730Ciência Florestal; v. 25 n. 3 (2015); 721-7301980-50980103-9954reponame:Ciência Florestal (Online)instname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMporhttps://periodicos.ufsm.br/cienciaflorestal/article/view/19675/11682Cravo, Julio Cesar MachadoSartori, Diogo de LuccaFiorelli, JulianoBalieiro, Julio Cesar de CarvalhoSavastano Junior, Holmerinfo:eu-repo/semantics/openAccess2017-04-10T18:30:41Zoai:ojs.pkp.sfu.ca:article/19675Revistahttp://www.ufsm.br/cienciaflorestal/ONGhttps://old.scielo.br/oai/scielo-oai.php||cienciaflorestal@ufsm.br|| cienciaflorestal@gmail.com|| cf@smail.ufsm.br1980-50980103-9954opendoar:2017-04-10T18:30:41Ciência Florestal (Online) - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTES PAINEL AGLOMERADO DE RESÍDUOS AGROINDUSTRIAIS |
title |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTES |
spellingShingle |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTES Cravo, Julio Cesar Machado coconut fiber peanut hulls polyurethane resin particleboard fibra de coco casca de amendoim resina poliuretana painéis aglomerados. |
title_short |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTES |
title_full |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTES |
title_fullStr |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTES |
title_full_unstemmed |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTES |
title_sort |
PARTICLEBOARDS OF AGROINDUSTRIAL WASTES |
author |
Cravo, Julio Cesar Machado |
author_facet |
Cravo, Julio Cesar Machado Sartori, Diogo de Lucca Fiorelli, Juliano Balieiro, Julio Cesar de Carvalho Savastano Junior, Holmer |
author_role |
author |
author2 |
Sartori, Diogo de Lucca Fiorelli, Juliano Balieiro, Julio Cesar de Carvalho Savastano Junior, Holmer |
author2_role |
author author author author |
dc.contributor.author.fl_str_mv |
Cravo, Julio Cesar Machado Sartori, Diogo de Lucca Fiorelli, Juliano Balieiro, Julio Cesar de Carvalho Savastano Junior, Holmer |
dc.subject.por.fl_str_mv |
coconut fiber peanut hulls polyurethane resin particleboard fibra de coco casca de amendoim resina poliuretana painéis aglomerados. |
topic |
coconut fiber peanut hulls polyurethane resin particleboard fibra de coco casca de amendoim resina poliuretana painéis aglomerados. |
description |
The present study aimed to develop particleboards of low density with peanut shell, coconut husk fiber green (hybrid) and two-component polyurethane resin based on castor oil. The experimental panels were manufactured with particles up to 8mm and 15% polyurethane resin. The pressing was carried out at 5.0 MPa for 10 minutes at 100°C of temperature. The physical-mechanical properties of the material were determined as recommended by ABNT 14810:2006. The results demonstrated a mechanical performance that meets the recommendations established by normative ANSI A208.1-1999 and ABNT 14.810-2:2006. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-09-30 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://periodicos.ufsm.br/cienciaflorestal/article/view/19675 10.5902/1980509819675 |
url |
https://periodicos.ufsm.br/cienciaflorestal/article/view/19675 |
identifier_str_mv |
10.5902/1980509819675 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://periodicos.ufsm.br/cienciaflorestal/article/view/19675/11682 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria |
dc.source.none.fl_str_mv |
Ciência Florestal; Vol. 25 No. 3 (2015); 721-730 Ciência Florestal; v. 25 n. 3 (2015); 721-730 1980-5098 0103-9954 reponame:Ciência Florestal (Online) instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Ciência Florestal (Online) |
collection |
Ciência Florestal (Online) |
repository.name.fl_str_mv |
Ciência Florestal (Online) - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
||cienciaflorestal@ufsm.br|| cienciaflorestal@gmail.com|| cf@smail.ufsm.br |
_version_ |
1799944130415034368 |