Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes
Autor(a) principal: | |
---|---|
Data de Publicação: | 2020 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
dARK ID: | ark:/26339/00130000056zr |
Texto Completo: | http://repositorio.ufsm.br/handle/1/21040 |
Resumo: | Cooperation between input suppliers and contractors makes it indispensable to achieve greater difficulty and reduce processes, consequently, achieving the best results. The present study is inserted in the context of lean thinking, applied to a specific part of the supply chain: a relationship between suppliers and contractors, and the extent to which this relationship affects the best results. Based on the elucidated assumptions, the present study aims to measure the existing cooperation between a cold agro-industrial cooperative and its input suppliers. To achieve the expected results, a structured methodology was followed, starting by measuring the costs incurred due to non-conformities in the various types of inputs. Then, a questionnaire was applied with questions used as indicators (KPIs), which guided the critical success factors (FCS). Then, the AHP method was used to generate a cooperation index for each supplier. Finally, the cooperation index and the quantity of disposal of each supplier was compared. In this context, no relationship was identified between the cooperation index and discards as it was perceived that the types and variations of inputs influence the analysis. In general, the agro-industrial cooperative obtained good levels of cooperation with its suppliers, about 77.8% of which were considered fully or potentially cooperative. It was found that the suppliers that obtained better results in the FCS Risk Sharing Contract, and especially Information Sharing, had better performance in the cooperation index. It was also identified that the percentage of discards is not directly related to the cooperation index when comparing inputs from different segments. The high demand for meat on the part of China, due to a specific event that was the swine fever that occurred in this country in 2018, negatively affected the cooperation between suppliers and the cooperative. This fact implied variations in production directions, and in this context, suppliers that advance inputs start to bear losses due to changes in the cooperative's production mix. At the end of the study, through the identification of the main factors related to cooperation, it is possible to increase the cooperation rate of suppliers so that waste is reduced and, consequently, the costs inherent to this waste are reduced. Modeling offers support so that managers are able to monitor the levels of interaction with suppliers, mainly seeking to reduce waste. |
id |
UFSM_33f67d00081fedd040ead5386738d452 |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/21040 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantesLean Supply Chain: importance of cooperation between input suppliers and contractorsLean Supply ChainCooperationCooperaçãoFCS (Fatores Críticos de Sucesso)KPIsCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOCooperation between input suppliers and contractors makes it indispensable to achieve greater difficulty and reduce processes, consequently, achieving the best results. The present study is inserted in the context of lean thinking, applied to a specific part of the supply chain: a relationship between suppliers and contractors, and the extent to which this relationship affects the best results. Based on the elucidated assumptions, the present study aims to measure the existing cooperation between a cold agro-industrial cooperative and its input suppliers. To achieve the expected results, a structured methodology was followed, starting by measuring the costs incurred due to non-conformities in the various types of inputs. Then, a questionnaire was applied with questions used as indicators (KPIs), which guided the critical success factors (FCS). Then, the AHP method was used to generate a cooperation index for each supplier. Finally, the cooperation index and the quantity of disposal of each supplier was compared. In this context, no relationship was identified between the cooperation index and discards as it was perceived that the types and variations of inputs influence the analysis. In general, the agro-industrial cooperative obtained good levels of cooperation with its suppliers, about 77.8% of which were considered fully or potentially cooperative. It was found that the suppliers that obtained better results in the FCS Risk Sharing Contract, and especially Information Sharing, had better performance in the cooperation index. It was also identified that the percentage of discards is not directly related to the cooperation index when comparing inputs from different segments. The high demand for meat on the part of China, due to a specific event that was the swine fever that occurred in this country in 2018, negatively affected the cooperation between suppliers and the cooperative. This fact implied variations in production directions, and in this context, suppliers that advance inputs start to bear losses due to changes in the cooperative's production mix. At the end of the study, through the identification of the main factors related to cooperation, it is possible to increase the cooperation rate of suppliers so that waste is reduced and, consequently, the costs inherent to this waste are reduced. Modeling offers support so that managers are able to monitor the levels of interaction with suppliers, mainly seeking to reduce waste.A cooperação entre fornecedores de insumos e contratantes se faz indispensável para alcançar maior produtividade e reduzir perdas nos processos, consequentemente, atingindo melhores resultados. O presente estudo está inserido no contexto do pensamento lean, aplicado a uma parte específica da cadeia de suprimentos: a relação entre fornecedores e contratantes, e até em que ponto essa relação influencia melhores resultados. Com base nos pressupostos elucidados, o presente trabalho tem como objetivo mensurar a cooperação existente entre uma cooperativa agroindustrial frigorífica e seus fornecedores de insumos. Para atingir os resultados esperados, seguiu-se uma metodologia estruturada, iniciando através da mensuração dos custos incorridos por não conformidades nos vários tipos de insumos. Na sequência, foi aplicado um questionário com perguntas utilizadas como indicadores (KPIs), que nortearam os fatores críticos de sucesso (FCS). Então, utilizou-se método AHP para gerar um índice de cooperação para cada fornecedor. Por fim, foi comparado o índice de cooperação e a quantidade de descarte de cada fornecedor. Neste contexto, não se identificou relação entre índice de cooperação e descartes pois foi percebido que os tipos e variações de insumos influenciam na análise. De forma geral, a cooperativa agroindustrial obteve bons índices de cooperação com seus fornecedores, cerca de 77,8% deles foram considerados plenamente ou potencialmente cooperativos. Foi constatado que os fornecedores que obtiveram melhores resultados nos FCS Contrato de Compartilhamento de Riscos, e principalmente Compartilhamento de Informações, obtiveram melhor desempenho no índice de cooperação. Também identificou-se que as porcentagens de descartes não estão diretamente relacionadas ao índice de cooperação quando comparados insumos de diferentes segmentos. A alta demanda de carne por parte da China, devido um acontecimento pontual que foi a peste suína ocorrida neste país no ano de 2018, afetou de forma negativa a cooperação entre fornecedores e cooperativa. Este fato implicou em variações nos direcionamentos de produção, e neste contexto, fornecedores que realizam adiantamento de insumos passam a arcar com prejuízos devido as mudanças de mix produtivos da cooperativa. Ao final do estudo, através da identificação dos principais fatores relacionados a cooperação, pode-se aumentar o índice de cooperação dos fornecedores de modo que se reduzam os desperdícios, e por consequência reduzam custos inerentes a esse desperdício. A modelagem oferece apoio para que os gestores consigam monitorar os níveis de interação com os fornecedores, buscando principalmente reduzir desperdícios.Universidade Federal de Santa MariaBrasilEngenharia de ProduçãoUFSMPrograma de Pós-Graduação em Engenharia de ProduçãoCentro de TecnologiaSiluk, Julio Cezar Mairessehttp://lattes.cnpq.br/8315298509051752Neuenfeldt Júnior, Alvaro LuizBaierle, Ismael CristoferFurtado, João CarlosAlécio, João Luiz Cuareli2021-06-02T00:38:52Z2021-06-02T00:38:52Z2020-02-20info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/21040ark:/26339/00130000056zrporAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2021-06-02T06:01:34Zoai:repositorio.ufsm.br:1/21040Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2024-07-29T10:24:27.741400Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes Lean Supply Chain: importance of cooperation between input suppliers and contractors |
title |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes |
spellingShingle |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes Alécio, João Luiz Cuareli Lean Supply Chain Cooperation Cooperação FCS (Fatores Críticos de Sucesso) KPIs CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
title_short |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes |
title_full |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes |
title_fullStr |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes |
title_full_unstemmed |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes |
title_sort |
Lean Supply Chain: importância da cooperação entre fornecedores de insumos e contratantes |
author |
Alécio, João Luiz Cuareli |
author_facet |
Alécio, João Luiz Cuareli |
author_role |
author |
dc.contributor.none.fl_str_mv |
Siluk, Julio Cezar Mairesse http://lattes.cnpq.br/8315298509051752 Neuenfeldt Júnior, Alvaro Luiz Baierle, Ismael Cristofer Furtado, João Carlos |
dc.contributor.author.fl_str_mv |
Alécio, João Luiz Cuareli |
dc.subject.por.fl_str_mv |
Lean Supply Chain Cooperation Cooperação FCS (Fatores Críticos de Sucesso) KPIs CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
topic |
Lean Supply Chain Cooperation Cooperação FCS (Fatores Críticos de Sucesso) KPIs CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
description |
Cooperation between input suppliers and contractors makes it indispensable to achieve greater difficulty and reduce processes, consequently, achieving the best results. The present study is inserted in the context of lean thinking, applied to a specific part of the supply chain: a relationship between suppliers and contractors, and the extent to which this relationship affects the best results. Based on the elucidated assumptions, the present study aims to measure the existing cooperation between a cold agro-industrial cooperative and its input suppliers. To achieve the expected results, a structured methodology was followed, starting by measuring the costs incurred due to non-conformities in the various types of inputs. Then, a questionnaire was applied with questions used as indicators (KPIs), which guided the critical success factors (FCS). Then, the AHP method was used to generate a cooperation index for each supplier. Finally, the cooperation index and the quantity of disposal of each supplier was compared. In this context, no relationship was identified between the cooperation index and discards as it was perceived that the types and variations of inputs influence the analysis. In general, the agro-industrial cooperative obtained good levels of cooperation with its suppliers, about 77.8% of which were considered fully or potentially cooperative. It was found that the suppliers that obtained better results in the FCS Risk Sharing Contract, and especially Information Sharing, had better performance in the cooperation index. It was also identified that the percentage of discards is not directly related to the cooperation index when comparing inputs from different segments. The high demand for meat on the part of China, due to a specific event that was the swine fever that occurred in this country in 2018, negatively affected the cooperation between suppliers and the cooperative. This fact implied variations in production directions, and in this context, suppliers that advance inputs start to bear losses due to changes in the cooperative's production mix. At the end of the study, through the identification of the main factors related to cooperation, it is possible to increase the cooperation rate of suppliers so that waste is reduced and, consequently, the costs inherent to this waste are reduced. Modeling offers support so that managers are able to monitor the levels of interaction with suppliers, mainly seeking to reduce waste. |
publishDate |
2020 |
dc.date.none.fl_str_mv |
2020-02-20 2021-06-02T00:38:52Z 2021-06-02T00:38:52Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/21040 |
dc.identifier.dark.fl_str_mv |
ark:/26339/00130000056zr |
url |
http://repositorio.ufsm.br/handle/1/21040 |
identifier_str_mv |
ark:/26339/00130000056zr |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia de Produção UFSM Programa de Pós-Graduação em Engenharia de Produção Centro de Tecnologia |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia de Produção UFSM Programa de Pós-Graduação em Engenharia de Produção Centro de Tecnologia |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1814439733407776768 |