Gráficos de controle de regressão beta robustos
Autor(a) principal: | |
---|---|
Data de Publicação: | 2019 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/17342 |
Resumo: | Control charts are the main tool of the statistical control process (SPC) to monitor and extract information about a certain process. The usual control charts are built under the normality assumption of the data or approximation by normal. However, fractional-type data generally presents asymmetry, becoming the normal assumption inappropriate. Another common characteristic in production lines is a main characteristic can be affected by control variables, which requires a regression model to adjust their influence. The beta regression control chart (BRCC) fulfills these two needs, being useful for monitoring fraction type variables and incorporating control variables that influence the response variable. BRCC is based on maximum likelihood inference, which is seriously affected by outliers. Considering that in Phase I, the parameters estimates are obtained, not treating the aberrant values can cause distortions in the model. Consequently, the control limits determination can be compromised, providing misinformation about the process stability. In this work, we propose robust beta regression control charts based on weighted maximum likelihood estimators. This method uses robust inference, decreasing outliers influence in the parameters estimation, without losing all information os those observations. Thus, the control limits determination is not affected by distant observations of the data bulk, which may hinder the correct model specification. Through Monte Carlo simulations, we evaluated the breakdown point and sensitivity curve of the estimators and the adaptive measures of the ARL to analyze the performance of the control charts. Finally, in order to demonstrate the performance of the proposed charts, an application in real data was made, comparing the proposed graphs results with the competitors control charts. The proposed control charts show better performance, demonstrating the need for robust control charts in real data. |
id |
UFSM_4aacf1e9729eda05ca8cc8951b51a6bb |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/17342 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Gráficos de controle de regressão beta robustosRobust beta regression control chartsGráficos de controleFraçãoOutliersRegressão betaVerossimilhança ponderadaControl chartsFractionOutliersBeta regressionWeighted maximum likelihoodCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOControl charts are the main tool of the statistical control process (SPC) to monitor and extract information about a certain process. The usual control charts are built under the normality assumption of the data or approximation by normal. However, fractional-type data generally presents asymmetry, becoming the normal assumption inappropriate. Another common characteristic in production lines is a main characteristic can be affected by control variables, which requires a regression model to adjust their influence. The beta regression control chart (BRCC) fulfills these two needs, being useful for monitoring fraction type variables and incorporating control variables that influence the response variable. BRCC is based on maximum likelihood inference, which is seriously affected by outliers. Considering that in Phase I, the parameters estimates are obtained, not treating the aberrant values can cause distortions in the model. Consequently, the control limits determination can be compromised, providing misinformation about the process stability. In this work, we propose robust beta regression control charts based on weighted maximum likelihood estimators. This method uses robust inference, decreasing outliers influence in the parameters estimation, without losing all information os those observations. Thus, the control limits determination is not affected by distant observations of the data bulk, which may hinder the correct model specification. Through Monte Carlo simulations, we evaluated the breakdown point and sensitivity curve of the estimators and the adaptive measures of the ARL to analyze the performance of the control charts. Finally, in order to demonstrate the performance of the proposed charts, an application in real data was made, comparing the proposed graphs results with the competitors control charts. The proposed control charts show better performance, demonstrating the need for robust control charts in real data.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESOs gráficos de controle (GC) são as principais ferramentas do controle estatístico de processo (CEP) para monitorar e extrair informação de um determinado processo. Os gráficos tradicionais são arquitetados assumindo a normalidade dos dados ou aproximações pela normal. Contudo, dados do tipo fração usualmente apresentam assimetria, não sendo razoável a suposição de normalidade. Outra característica comum nas linhas de produção, é que a característica da qualidade de interesse pode ser afetada por variáveis controle, necessitando de um modelo de regressão para ajustar essa influência. Os gráficos de controle de regressão beta (GCRB) suprem essas duas necessidades, sendo úteis para monitorar variáveis do tipo fração e incorporar variáveis controle que influenciam a variável de interesse. No entanto, as inferências relacionadas aos GCRBs são feitas baseadas no método da máxima verossimilhança, o qual é seriamente afetado por outliers. Considerando que na Fase I são obtidas as estimativas dos parâmetros, não tratar os valores discrepantes pode ocasionar distorções no modelo. Por consequência, a determinação dos limites de controle pode ser comprometida fornecendo informações distorcidas sobre a estabilidade do processo. Neste trabalho, propomos gráficos de controle de regressão beta robustos, baseados em estimadores de máxima verossimilhança ponderada. Esse método utiliza inferência robusta e diminui a influência de valores atípicos na estimação dos parâmetros, sem perder totalmente a informação dessas observações. Desse modo, a construção dos limites de controle não é afetada por observações distantes da massa dados, as quais podem prejudicar a correta especificação do modelo. Através de simulações de Monte Carlo, foram avaliadas medidas específicas de robustez como ponto de ruptura e curva de sensibilidade dos estimadores e medidas adaptadas de ARL para análise de desempenho dos GCs. As avaliações numérica comprovaram a robustez dos GCs propostos, os quais foram capazes de fornecer informações mais confiáveis sobre o estado do processo. Por fim, na intenção de demonstrar o desempenho dos gráficos propostos foi realizada uma aplicação em dados reais, comparando resultados obtidos com GCs concorrentes. Os gráficos propostos apresentaram melhor desempenho, evidenciando a necessidade de utilizar GC robustos em dados reais.Universidade Federal de Santa MariaBrasilEngenharia de ProduçãoUFSMPrograma de Pós-Graduação em Engenharia de ProduçãoCentro de TecnologiaBayer, Fabio Marianohttp://lattes.cnpq.br/9904863693302949Guerra, Renata Rojashttp://lattes.cnpq.br/3142871647774939Lima Filho, Luiz Medeiros de Araujohttp://lattes.cnpq.br/8680871640499952Silva, Luan Portella da2019-07-08T12:21:09Z2019-07-08T12:21:09Z2019-02-19info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/17342porAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2019-07-09T06:01:20Zoai:repositorio.ufsm.br:1/17342Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2019-07-09T06:01:20Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Gráficos de controle de regressão beta robustos Robust beta regression control charts |
title |
Gráficos de controle de regressão beta robustos |
spellingShingle |
Gráficos de controle de regressão beta robustos Silva, Luan Portella da Gráficos de controle Fração Outliers Regressão beta Verossimilhança ponderada Control charts Fraction Outliers Beta regression Weighted maximum likelihood CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
title_short |
Gráficos de controle de regressão beta robustos |
title_full |
Gráficos de controle de regressão beta robustos |
title_fullStr |
Gráficos de controle de regressão beta robustos |
title_full_unstemmed |
Gráficos de controle de regressão beta robustos |
title_sort |
Gráficos de controle de regressão beta robustos |
author |
Silva, Luan Portella da |
author_facet |
Silva, Luan Portella da |
author_role |
author |
dc.contributor.none.fl_str_mv |
Bayer, Fabio Mariano http://lattes.cnpq.br/9904863693302949 Guerra, Renata Rojas http://lattes.cnpq.br/3142871647774939 Lima Filho, Luiz Medeiros de Araujo http://lattes.cnpq.br/8680871640499952 |
dc.contributor.author.fl_str_mv |
Silva, Luan Portella da |
dc.subject.por.fl_str_mv |
Gráficos de controle Fração Outliers Regressão beta Verossimilhança ponderada Control charts Fraction Outliers Beta regression Weighted maximum likelihood CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
topic |
Gráficos de controle Fração Outliers Regressão beta Verossimilhança ponderada Control charts Fraction Outliers Beta regression Weighted maximum likelihood CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
description |
Control charts are the main tool of the statistical control process (SPC) to monitor and extract information about a certain process. The usual control charts are built under the normality assumption of the data or approximation by normal. However, fractional-type data generally presents asymmetry, becoming the normal assumption inappropriate. Another common characteristic in production lines is a main characteristic can be affected by control variables, which requires a regression model to adjust their influence. The beta regression control chart (BRCC) fulfills these two needs, being useful for monitoring fraction type variables and incorporating control variables that influence the response variable. BRCC is based on maximum likelihood inference, which is seriously affected by outliers. Considering that in Phase I, the parameters estimates are obtained, not treating the aberrant values can cause distortions in the model. Consequently, the control limits determination can be compromised, providing misinformation about the process stability. In this work, we propose robust beta regression control charts based on weighted maximum likelihood estimators. This method uses robust inference, decreasing outliers influence in the parameters estimation, without losing all information os those observations. Thus, the control limits determination is not affected by distant observations of the data bulk, which may hinder the correct model specification. Through Monte Carlo simulations, we evaluated the breakdown point and sensitivity curve of the estimators and the adaptive measures of the ARL to analyze the performance of the control charts. Finally, in order to demonstrate the performance of the proposed charts, an application in real data was made, comparing the proposed graphs results with the competitors control charts. The proposed control charts show better performance, demonstrating the need for robust control charts in real data. |
publishDate |
2019 |
dc.date.none.fl_str_mv |
2019-07-08T12:21:09Z 2019-07-08T12:21:09Z 2019-02-19 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/17342 |
url |
http://repositorio.ufsm.br/handle/1/17342 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia de Produção UFSM Programa de Pós-Graduação em Engenharia de Produção Centro de Tecnologia |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia de Produção UFSM Programa de Pós-Graduação em Engenharia de Produção Centro de Tecnologia |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922061423476736 |