Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos
Autor(a) principal: | |
---|---|
Data de Publicação: | 2017 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/12184 |
Resumo: | Constructed wetlands (CWs) are artificial systems used for wastewater treatment, whose objective is to reproduce, under controlled conditions, the treatment mechanisms that occur in natural environments, through the exploration and improve the processes that involve the vegetation, porous media and microbial assemblages. Horizontal subsurface flow constructed wetlands (HSSF-CWs) is characterized by flow in a horizontal direction, in a gravel or sand beds planted or unplanted with emergent macrophytes whose the inlet and outlet are horizontally opposed, which allows the wastewater flow through the rhizosphere and have contact with the biofilm formed in subsurface. Traditional studies about CWs focuses on the efficiency of contaminants removal look at systems as a "black-boxes" from empirical approaches and do not distinguish between the different active removals processes. The development of numerical models, in order to helping to identify and improve the role of each element acting in the treatment, whether the properties of the porous media, constructive geometry, flow characteristics, among others, appears as an alternative to reach a more detailed understanding of the internal processes involved in CWs. In general, numerical models consist of governing equations (derived from the mathematical combination of the water balance and Darcy's law), initial conditions (they refer to the distribution of the hydraulic head in the model domain) and boundaries conditions (define the hydraulic or physical boundaries that delimit the model domain). In the last decade, different 1D and 2D numerical models have been developed and applied for the simulation of subsurface flow CWs under conditions of saturated horizontal flow (CWM1-RETRASO and PHWAT), variably saturated vertical flow (FITOVERT and HYDRUS-CW2D) and vertical or horizontally saturated flow (HYDRUS-CWM1). However, few studies regarding the application of 3D numerical models for CWs simulation are reported in the scientific literature. In this study, the hydrodynamic simulation of the porous media in a horizontal subsurface flow constructed wetland was run through the application of a 3D numerical model. The flow patterns were simulated according to the project design and scenarios with changes in the porous media hydrodynamic (hydraulic conductivity) and in the positioning of the wastewater distribution mechanisms (distribution along the cross section with two pipes) in order to verify the influence of these factors in the flow pattern and also to indicate advantages and disadvantages that contribute to the design. The softwares MODFLOW and MODPATH, in the GMS family code, were used for to simulate the direction and flow velocity, hydraulic head and pathlines. The model proved to be a powerful tool to simulation, allowing observing the interdependence between the hydrodynamic parameters and the hydraulic characteristics in the porous media. The simulated scenarios showed the possibility of improving the flow patterns, mainly using two pipes to distribute the wastewater in a more homogeneous way along the cross section of the bed. The use of a porous media with lower hydraulic conductivity also showed improvement in flow characteristics evaluated. However, the general context of wastewater treatment facilities (pretreatment units and tributary loads) should be considered, since materials with low hydraulic conductivity are more susceptible to clogging. Proper design is crucial to improving the treatment conditions in the HSSF-CWs and also to avoid the occurrence of hydraulic problems and damage to the treatment, such as the clogging. |
id |
UFSM_7bbef05f4b703840b13b781c4d13caed |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/12184 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídosModflow for hydrodynamic simulation of the porous media in constructed wetlandsEfluentes domésticosFiltros plantados com macrófitasGroundwater modeling systemModelos tridimensionaisSimulação numéricaDomestics wastewaterConstructed wetlandsGroundwater modeling systemThree-dimensional modelsNumerical simulationCNPQ::ENGENHARIASConstructed wetlands (CWs) are artificial systems used for wastewater treatment, whose objective is to reproduce, under controlled conditions, the treatment mechanisms that occur in natural environments, through the exploration and improve the processes that involve the vegetation, porous media and microbial assemblages. Horizontal subsurface flow constructed wetlands (HSSF-CWs) is characterized by flow in a horizontal direction, in a gravel or sand beds planted or unplanted with emergent macrophytes whose the inlet and outlet are horizontally opposed, which allows the wastewater flow through the rhizosphere and have contact with the biofilm formed in subsurface. Traditional studies about CWs focuses on the efficiency of contaminants removal look at systems as a "black-boxes" from empirical approaches and do not distinguish between the different active removals processes. The development of numerical models, in order to helping to identify and improve the role of each element acting in the treatment, whether the properties of the porous media, constructive geometry, flow characteristics, among others, appears as an alternative to reach a more detailed understanding of the internal processes involved in CWs. In general, numerical models consist of governing equations (derived from the mathematical combination of the water balance and Darcy's law), initial conditions (they refer to the distribution of the hydraulic head in the model domain) and boundaries conditions (define the hydraulic or physical boundaries that delimit the model domain). In the last decade, different 1D and 2D numerical models have been developed and applied for the simulation of subsurface flow CWs under conditions of saturated horizontal flow (CWM1-RETRASO and PHWAT), variably saturated vertical flow (FITOVERT and HYDRUS-CW2D) and vertical or horizontally saturated flow (HYDRUS-CWM1). However, few studies regarding the application of 3D numerical models for CWs simulation are reported in the scientific literature. In this study, the hydrodynamic simulation of the porous media in a horizontal subsurface flow constructed wetland was run through the application of a 3D numerical model. The flow patterns were simulated according to the project design and scenarios with changes in the porous media hydrodynamic (hydraulic conductivity) and in the positioning of the wastewater distribution mechanisms (distribution along the cross section with two pipes) in order to verify the influence of these factors in the flow pattern and also to indicate advantages and disadvantages that contribute to the design. The softwares MODFLOW and MODPATH, in the GMS family code, were used for to simulate the direction and flow velocity, hydraulic head and pathlines. The model proved to be a powerful tool to simulation, allowing observing the interdependence between the hydrodynamic parameters and the hydraulic characteristics in the porous media. The simulated scenarios showed the possibility of improving the flow patterns, mainly using two pipes to distribute the wastewater in a more homogeneous way along the cross section of the bed. The use of a porous media with lower hydraulic conductivity also showed improvement in flow characteristics evaluated. However, the general context of wastewater treatment facilities (pretreatment units and tributary loads) should be considered, since materials with low hydraulic conductivity are more susceptible to clogging. Proper design is crucial to improving the treatment conditions in the HSSF-CWs and also to avoid the occurrence of hydraulic problems and damage to the treatment, such as the clogging.Wetlands construídos (WCs) são tecnologias empregadas para o tratamento de águas residuárias, cujo objetivo é reproduzir, sob condições controladas, os mecanismos de depuração que ocorrem em meios naturais, através da exploração e aperfeiçoamento dos processos que envolvem a vegetação, o substrato e os microrganismos. Wetlands construídos de escoamento subsuperficial de fluxo horizontal (WCFH) são caracterizados pelo fluxo em direção horizontal através de um leito de cascalho ou areia, vegetado ou não com macrófitas emergentes, cujas entrada e saída dos efluentes são horizontalmente opostas, o que permite que as águas residuárias fluam através da rizosfera e tenham contato com o biofilme formado em subsuperfície. Tradicionalmente, os estudos sobre WCs incidem apenas sobre a remoção das concentrações de contaminantes, considerando esses sistemas como “black-boxes” a partir de abordagens empíricas, sem fazer distinção entre os diferentes processos atuantes. O desenvolvimento de modelos numéricos, como forma de auxiliar a identificar e aperfeiçoar o papel de cada elemento atuante no tratamento, quer sejam as propriedades do meio poroso, a geometria construtiva, as características de fluxo, entre outros, surge como alternativa para o alcance de uma compreensão mais detalhada dos processos internos intervenientes nos WCs. De uma forma geral, os modelos numéricos são constituídos por equações governantes (derivada da combinação matemática da equação de balanço de água e da lei de Darcy), por condições iniciais (dizem respeito à distribuição da carga hidráulica no domínio do modelo) e por condições de contorno (definem as fronteiras hidráulicas ou físicas que delimitam o domínio do modelo). Na última década, diferentes modelos 1D e 2D foram desenvolvidos e aplicados para a simulação de WCs de escoamento subsuperficial em condições de fluxo horizontal saturado (CWM1-RETRASO e PHWAT), vertical variavelmente saturado (FITOVERT e HYDRUS-CW2D) e vertical ou horizontal variavelmente saturado (HYDRUS-CWM1). Porém, poucas experiências relativas à aplicação de modelos 3D para simulação de WCs são relatadas pela literatura científica. Neste trabalho, a simulação da hidrodinâmica do meio poroso de um sistema de tratamento de efluentes do tipo wetlands construídos de escoamento subsuperficial de fluxo horizontal foi realizada por meio da aplicação de um modelo numérico 3D. Foram simuladas as condições de fluxo conforme as especificações de um projeto de engenheria, e também cenários com mudanças nas características hidrodinâmicas do meio poroso (condutividade hidráulica) e no posicionamento dos mecanismos de distribuição das águas residuárias (distribuição ao longo da seção transversal por meio de duas tubulações) visando verificar a influência desses fatores no sistema de fluxo e também indicar vantagens e desvantagens que contribuam para a elaboração de projetos. Os softwares MODFLOW e MODPATH, executados por meio da interface GMS, foram utilizados para a simulação da direção e velocidade de fluxo, nível hidráulico e linhas de trajetória das partículas transportadas por advecção. O modelo provou ser uma ferramenta poderosa para a simulação, permitindo visualizar a interdependência entre os parâmetros hidrodinâmicos e as características hidráulicas do meio poroso. Os cenários simulados mostraram a possibilidade de melhoria dos padrões de fluxo, principalmente por meio do uso de duas tubulações para distribuição dos efluentes de forma mais homogênea ao longo da seção transversal do leito. O uso de materiais com menor condutividade hidráulica também apresentou melhoria nas características de fluxo avaliadas. Porém, deve-se considerar o contexto geral das instalações de tratamento das águas residuárias (unidades de tratamento preliminar e cargas afluentes), visto que materiais com baixa condutividade hidráulica são mais susceptíveis ao entupimento. A concepção adequada é crucial para melhorar as condições de tratamento verificadas nos WCFH e também para evitar a ocorrência de danos e problemas hidráulicos, como a estagnação de fluxo em zonas de baixa velocidade de escoamento.Universidade Federal de Santa MariaBrasilEngenharia AmbientalUFSMPrograma de Pós-Graduação em Engenharia AmbientalCentro de TecnologiaMancuso, Malva Andreahttp://lattes.cnpq.br/6763968238620077Wolf, Delmira Beatrizhttp://lattes.cnpq.br/2590812446293555Silva, José Luiz Silvério dahttp://lattes.cnpq.br/9689434318472831Paulo, Paula Loureirohttp://lattes.cnpq.br/7671945473090510Fioreze, Mariele2017-12-22T11:49:55Z2017-12-22T11:49:55Z2017-01-27info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/12184porAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2017-12-22T11:49:55Zoai:repositorio.ufsm.br:1/12184Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2017-12-22T11:49:55Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos Modflow for hydrodynamic simulation of the porous media in constructed wetlands |
title |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos |
spellingShingle |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos Fioreze, Mariele Efluentes domésticos Filtros plantados com macrófitas Groundwater modeling system Modelos tridimensionais Simulação numérica Domestics wastewater Constructed wetlands Groundwater modeling system Three-dimensional models Numerical simulation CNPQ::ENGENHARIAS |
title_short |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos |
title_full |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos |
title_fullStr |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos |
title_full_unstemmed |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos |
title_sort |
Uso de modflow para simulação da hidrodinâmica de meios porosos em wetlands construídos |
author |
Fioreze, Mariele |
author_facet |
Fioreze, Mariele |
author_role |
author |
dc.contributor.none.fl_str_mv |
Mancuso, Malva Andrea http://lattes.cnpq.br/6763968238620077 Wolf, Delmira Beatriz http://lattes.cnpq.br/2590812446293555 Silva, José Luiz Silvério da http://lattes.cnpq.br/9689434318472831 Paulo, Paula Loureiro http://lattes.cnpq.br/7671945473090510 |
dc.contributor.author.fl_str_mv |
Fioreze, Mariele |
dc.subject.por.fl_str_mv |
Efluentes domésticos Filtros plantados com macrófitas Groundwater modeling system Modelos tridimensionais Simulação numérica Domestics wastewater Constructed wetlands Groundwater modeling system Three-dimensional models Numerical simulation CNPQ::ENGENHARIAS |
topic |
Efluentes domésticos Filtros plantados com macrófitas Groundwater modeling system Modelos tridimensionais Simulação numérica Domestics wastewater Constructed wetlands Groundwater modeling system Three-dimensional models Numerical simulation CNPQ::ENGENHARIAS |
description |
Constructed wetlands (CWs) are artificial systems used for wastewater treatment, whose objective is to reproduce, under controlled conditions, the treatment mechanisms that occur in natural environments, through the exploration and improve the processes that involve the vegetation, porous media and microbial assemblages. Horizontal subsurface flow constructed wetlands (HSSF-CWs) is characterized by flow in a horizontal direction, in a gravel or sand beds planted or unplanted with emergent macrophytes whose the inlet and outlet are horizontally opposed, which allows the wastewater flow through the rhizosphere and have contact with the biofilm formed in subsurface. Traditional studies about CWs focuses on the efficiency of contaminants removal look at systems as a "black-boxes" from empirical approaches and do not distinguish between the different active removals processes. The development of numerical models, in order to helping to identify and improve the role of each element acting in the treatment, whether the properties of the porous media, constructive geometry, flow characteristics, among others, appears as an alternative to reach a more detailed understanding of the internal processes involved in CWs. In general, numerical models consist of governing equations (derived from the mathematical combination of the water balance and Darcy's law), initial conditions (they refer to the distribution of the hydraulic head in the model domain) and boundaries conditions (define the hydraulic or physical boundaries that delimit the model domain). In the last decade, different 1D and 2D numerical models have been developed and applied for the simulation of subsurface flow CWs under conditions of saturated horizontal flow (CWM1-RETRASO and PHWAT), variably saturated vertical flow (FITOVERT and HYDRUS-CW2D) and vertical or horizontally saturated flow (HYDRUS-CWM1). However, few studies regarding the application of 3D numerical models for CWs simulation are reported in the scientific literature. In this study, the hydrodynamic simulation of the porous media in a horizontal subsurface flow constructed wetland was run through the application of a 3D numerical model. The flow patterns were simulated according to the project design and scenarios with changes in the porous media hydrodynamic (hydraulic conductivity) and in the positioning of the wastewater distribution mechanisms (distribution along the cross section with two pipes) in order to verify the influence of these factors in the flow pattern and also to indicate advantages and disadvantages that contribute to the design. The softwares MODFLOW and MODPATH, in the GMS family code, were used for to simulate the direction and flow velocity, hydraulic head and pathlines. The model proved to be a powerful tool to simulation, allowing observing the interdependence between the hydrodynamic parameters and the hydraulic characteristics in the porous media. The simulated scenarios showed the possibility of improving the flow patterns, mainly using two pipes to distribute the wastewater in a more homogeneous way along the cross section of the bed. The use of a porous media with lower hydraulic conductivity also showed improvement in flow characteristics evaluated. However, the general context of wastewater treatment facilities (pretreatment units and tributary loads) should be considered, since materials with low hydraulic conductivity are more susceptible to clogging. Proper design is crucial to improving the treatment conditions in the HSSF-CWs and also to avoid the occurrence of hydraulic problems and damage to the treatment, such as the clogging. |
publishDate |
2017 |
dc.date.none.fl_str_mv |
2017-12-22T11:49:55Z 2017-12-22T11:49:55Z 2017-01-27 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/12184 |
url |
http://repositorio.ufsm.br/handle/1/12184 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia Ambiental UFSM Programa de Pós-Graduação em Engenharia Ambiental Centro de Tecnologia |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia Ambiental UFSM Programa de Pós-Graduação em Engenharia Ambiental Centro de Tecnologia |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922097140072448 |