Preparos e atributos físicos de solos para plantio de eucalipto

Detalhes bibliográficos
Autor(a) principal: Morales, Cedinara Arruda Santana
Data de Publicação: 2014
Tipo de documento: Tese
Idioma: por
Título da fonte: Manancial - Repositório Digital da UFSM
dARK ID: ark:/26339/001300000srch
Texto Completo: http://repositorio.ufsm.br/handle/1/3773
Resumo: With the expansion of cultivated forest in Rio Grande do Sul, there was an increase of the forest plantations, now occupying areas previously used for livestock and agricultural crops. The objective was to generate reccomendations for soil tillage, based on soil quality indicators. The study was conducted in three areas for the cultivation of clonal seedlings of Eucalyptus saligna Smith belonging to Celulose Riograndense in the state of Rio Grande do Sul. The soils are classified as Planossolo Háplico Eutrófico gleissólico (SXe), Nitossolo Vermelho Distrófico típico (NVd) and Neossolo Regolítico Eutroúmbrico típico (RReh). Initially a pilot survey was done to quantify the spatial variability of texture and soil resistance to penetration (RP); subsequently, soil samples were taken at depths of 0-10, 10-20, 20-40 and 40-60 cm. After the characterization and analysis of soil areas different soil tillages (subsoiling to 50 cm depth plus rotary hoe (S50), subsoiling to 50 cm depth with ridge (S50C), and subsoiling to 70 cm depth plusr rotary hoe (S70). Planting of Eucalyptus saligna Smith clones (3.5 x 2.6 m) was carried out. At 6, 12, 18 and 24 months after planting, the dendrometric evaluation of total height and diameter at breast height (dbh 1.30 m). The joint use of factor analysis and spatial variability of RP enabled us to identify locations with different compaction states. The least limiting water range (LLWR) was strongly affected by the penetration resistance and soil aeration in clayey soils. The bulk density values of Argissolos, in the larger states of soil compaction, were above the critical density based on the LLWR. The soil tillage with greater volume of soil disturbed (S50C), in SXe (1267.1 m3 ha- 1) and RReh (836.8 m3 ha-1), favored the initial development of Eucalyptus saligna Smith. In SXe at 24 months-old forest, the height was 10.38 cm and dbh of 9.90, whereas for the RReh the height was 10.15 m and dbh of 10.60 cm. In NVd, the highest growth was observed in the treatment S70, with an average height at 24 months of 9.77 m and dbh of 9.68 cm. The results of this study indicate that the choice of the best tillage depends on the texture, degree of compaction, critical density and penetration resistance of the soil. Thus, for Planossolo Háplico Eutrófico gleissólico and the Neossolo Regolítico Eutroúmbrico típico the best tillage was S50C, while for the Nitossolo Vermelho Distrófico típico was S70.
id UFSM_807e901842250887b5767f13d725e2f3
oai_identifier_str oai:repositorio.ufsm.br:1/3773
network_acronym_str UFSM
network_name_str Manancial - Repositório Digital da UFSM
repository_id_str
spelling Preparos e atributos físicos de solos para plantio de eucaliptoSoil tillage and physical properties for eucaliptusProdutividade florestalCompactação do soloPreparo do soloForest productivitySoil compactionSoil tillageCNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTALWith the expansion of cultivated forest in Rio Grande do Sul, there was an increase of the forest plantations, now occupying areas previously used for livestock and agricultural crops. The objective was to generate reccomendations for soil tillage, based on soil quality indicators. The study was conducted in three areas for the cultivation of clonal seedlings of Eucalyptus saligna Smith belonging to Celulose Riograndense in the state of Rio Grande do Sul. The soils are classified as Planossolo Háplico Eutrófico gleissólico (SXe), Nitossolo Vermelho Distrófico típico (NVd) and Neossolo Regolítico Eutroúmbrico típico (RReh). Initially a pilot survey was done to quantify the spatial variability of texture and soil resistance to penetration (RP); subsequently, soil samples were taken at depths of 0-10, 10-20, 20-40 and 40-60 cm. After the characterization and analysis of soil areas different soil tillages (subsoiling to 50 cm depth plus rotary hoe (S50), subsoiling to 50 cm depth with ridge (S50C), and subsoiling to 70 cm depth plusr rotary hoe (S70). Planting of Eucalyptus saligna Smith clones (3.5 x 2.6 m) was carried out. At 6, 12, 18 and 24 months after planting, the dendrometric evaluation of total height and diameter at breast height (dbh 1.30 m). The joint use of factor analysis and spatial variability of RP enabled us to identify locations with different compaction states. The least limiting water range (LLWR) was strongly affected by the penetration resistance and soil aeration in clayey soils. The bulk density values of Argissolos, in the larger states of soil compaction, were above the critical density based on the LLWR. The soil tillage with greater volume of soil disturbed (S50C), in SXe (1267.1 m3 ha- 1) and RReh (836.8 m3 ha-1), favored the initial development of Eucalyptus saligna Smith. In SXe at 24 months-old forest, the height was 10.38 cm and dbh of 9.90, whereas for the RReh the height was 10.15 m and dbh of 10.60 cm. In NVd, the highest growth was observed in the treatment S70, with an average height at 24 months of 9.77 m and dbh of 9.68 cm. The results of this study indicate that the choice of the best tillage depends on the texture, degree of compaction, critical density and penetration resistance of the soil. Thus, for Planossolo Háplico Eutrófico gleissólico and the Neossolo Regolítico Eutroúmbrico típico the best tillage was S50C, while for the Nitossolo Vermelho Distrófico típico was S70.Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorCom a expansão da produção florestal no Rio Grande do Sul, houve aumento na área dos plantios florestais anteriormente dominadas pela pecuária e pelos cultivos agrícolas. O objetivo foi gerar recomendações adequadas de preparo, com base nos indicadores de qualidade. O estudo foi realizado em três áreas destinadas ao cultivo de mudas clonais de Eucalyptus saligna Smith, pertencentes à empresa Celulose Riograndense, nos municípios de São Gabriel e Vila Nova do Sul, no RS. Os solos das áreas estudadas são classificados como Planossolo Háplico Eutrófico gleissólico (SXe), Nitossolo Vermelho Distrófico típico (NVd) e Neossolo Regolítico Eutroúmbrico típico (RReh). Na área de estudo foi feito, inicialmente, um levantamento piloto para observar a variabilidade espacial da textura e da resistência mecânica do solo à penetração (RP); posteriormente, foram realizadas amostragens do solo, nas camadas de 0-10, 10-20, 20-40 e 40-60 cm. Após a caracterização e análise do solo das áreas, foram aplicados diferentes preparos de solo (subsolagem a 50 cm de profundidade mais enxada rotativa (S50), subsolagem a 50 cm de profundidade mais camalhão (S50C) e subsolagem a 70 cm de profundidade mais enxada rotativa (S70)) e, posteriormente, foi realizado o plantio de clones de Eucalyptus saligna Smith (3,5 x 2,6 m). Aos 6, 12, 18 e 24 meses após o plantio, foram feitas as avaliações dendrométricas de altura total e diâmetro à altura do peito (dap 1,30 m). O uso conjunto da análise fatorial e da variabilidade espacial da RP permitiu identificar, locais com diferentes estados de compactação. O intervalo hídrico ótimo (IHO) foi fortemente limitado pela resistência à penetração e pela aeração do solo, nos solos mais argilosos. Os valores de densidade do solo mais Argissolo, nos maiores estados de compactação, foram superiores à densidade crítica com base no IHO. O preparo do solo com maior volume de solo mobilizado (S50C), no SXe (1267,1 m3 ha-1) e no RReh (836,8 m3 ha-1), favoreceu o melhor desenvolvimento inicial do Eucalyptus saligna Smith. No SXe a altura média aos 24 meses de idade foi de 10,38 m e dap de 9,90 cm e, no RReh, a altura foi de 10,15 m e dap de 10,60 cm. No NVd, o maior crescimento foi observado no tratamento S70, com altura média aos 24 meses de idade de 9,77 m e dap de 9,68 cm. Os resultados deste trabalho indicam que a escolha do melhor preparo de solo depende da textura, grau de compactação, densidade crítica e da resistência à penetração do solo. Assim, para o Planossolo Háplico Eutrófico gleissólico e para o Neossolo Regolítico Eutroúmbrico típico o melhor preparo de solo foi o tratamento S50C e, no Nitossolo Vermelho Distrófico típico, foi o tratamento S70.Universidade Federal de Santa MariaBRRecursos Florestais e Engenharia FlorestalUFSMPrograma de Pós-Graduação em Engenharia FlorestalReichert, José Miguelhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787840U9Rovedder, Ana Paula Moreirahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4763315T5Kaiser, Douglas Rodrigohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702778T6Muller, Ivanorhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4718818H8Albuquerque, Jackson Adrianohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4768301T7Morales, Cedinara Arruda Santana2015-03-132015-03-132014-02-24info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfapplication/pdfMORALES, Cedinara Arruda Santana. SOIL TILLAGE AND PHYSICAL PROPERTIES FOR EUCALIPTUS. 2014. 185 f. Tese (Doutorado em Recursos Florestais e Engenharia Florestal) - Universidade Federal de Santa Maria, Santa Maria, 2014.http://repositorio.ufsm.br/handle/1/3773ark:/26339/001300000srchporinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2022-03-08T17:36:39Zoai:repositorio.ufsm.br:1/3773Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-03-08T17:36:39Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false
dc.title.none.fl_str_mv Preparos e atributos físicos de solos para plantio de eucalipto
Soil tillage and physical properties for eucaliptus
title Preparos e atributos físicos de solos para plantio de eucalipto
spellingShingle Preparos e atributos físicos de solos para plantio de eucalipto
Morales, Cedinara Arruda Santana
Produtividade florestal
Compactação do solo
Preparo do solo
Forest productivity
Soil compaction
Soil tillage
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL
title_short Preparos e atributos físicos de solos para plantio de eucalipto
title_full Preparos e atributos físicos de solos para plantio de eucalipto
title_fullStr Preparos e atributos físicos de solos para plantio de eucalipto
title_full_unstemmed Preparos e atributos físicos de solos para plantio de eucalipto
title_sort Preparos e atributos físicos de solos para plantio de eucalipto
author Morales, Cedinara Arruda Santana
author_facet Morales, Cedinara Arruda Santana
author_role author
dc.contributor.none.fl_str_mv Reichert, José Miguel
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787840U9
Rovedder, Ana Paula Moreira
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4763315T5
Kaiser, Douglas Rodrigo
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702778T6
Muller, Ivanor
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4718818H8
Albuquerque, Jackson Adriano
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4768301T7
dc.contributor.author.fl_str_mv Morales, Cedinara Arruda Santana
dc.subject.por.fl_str_mv Produtividade florestal
Compactação do solo
Preparo do solo
Forest productivity
Soil compaction
Soil tillage
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL
topic Produtividade florestal
Compactação do solo
Preparo do solo
Forest productivity
Soil compaction
Soil tillage
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL
description With the expansion of cultivated forest in Rio Grande do Sul, there was an increase of the forest plantations, now occupying areas previously used for livestock and agricultural crops. The objective was to generate reccomendations for soil tillage, based on soil quality indicators. The study was conducted in three areas for the cultivation of clonal seedlings of Eucalyptus saligna Smith belonging to Celulose Riograndense in the state of Rio Grande do Sul. The soils are classified as Planossolo Háplico Eutrófico gleissólico (SXe), Nitossolo Vermelho Distrófico típico (NVd) and Neossolo Regolítico Eutroúmbrico típico (RReh). Initially a pilot survey was done to quantify the spatial variability of texture and soil resistance to penetration (RP); subsequently, soil samples were taken at depths of 0-10, 10-20, 20-40 and 40-60 cm. After the characterization and analysis of soil areas different soil tillages (subsoiling to 50 cm depth plus rotary hoe (S50), subsoiling to 50 cm depth with ridge (S50C), and subsoiling to 70 cm depth plusr rotary hoe (S70). Planting of Eucalyptus saligna Smith clones (3.5 x 2.6 m) was carried out. At 6, 12, 18 and 24 months after planting, the dendrometric evaluation of total height and diameter at breast height (dbh 1.30 m). The joint use of factor analysis and spatial variability of RP enabled us to identify locations with different compaction states. The least limiting water range (LLWR) was strongly affected by the penetration resistance and soil aeration in clayey soils. The bulk density values of Argissolos, in the larger states of soil compaction, were above the critical density based on the LLWR. The soil tillage with greater volume of soil disturbed (S50C), in SXe (1267.1 m3 ha- 1) and RReh (836.8 m3 ha-1), favored the initial development of Eucalyptus saligna Smith. In SXe at 24 months-old forest, the height was 10.38 cm and dbh of 9.90, whereas for the RReh the height was 10.15 m and dbh of 10.60 cm. In NVd, the highest growth was observed in the treatment S70, with an average height at 24 months of 9.77 m and dbh of 9.68 cm. The results of this study indicate that the choice of the best tillage depends on the texture, degree of compaction, critical density and penetration resistance of the soil. Thus, for Planossolo Háplico Eutrófico gleissólico and the Neossolo Regolítico Eutroúmbrico típico the best tillage was S50C, while for the Nitossolo Vermelho Distrófico típico was S70.
publishDate 2014
dc.date.none.fl_str_mv 2014-02-24
2015-03-13
2015-03-13
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv MORALES, Cedinara Arruda Santana. SOIL TILLAGE AND PHYSICAL PROPERTIES FOR EUCALIPTUS. 2014. 185 f. Tese (Doutorado em Recursos Florestais e Engenharia Florestal) - Universidade Federal de Santa Maria, Santa Maria, 2014.
http://repositorio.ufsm.br/handle/1/3773
dc.identifier.dark.fl_str_mv ark:/26339/001300000srch
identifier_str_mv MORALES, Cedinara Arruda Santana. SOIL TILLAGE AND PHYSICAL PROPERTIES FOR EUCALIPTUS. 2014. 185 f. Tese (Doutorado em Recursos Florestais e Engenharia Florestal) - Universidade Federal de Santa Maria, Santa Maria, 2014.
ark:/26339/001300000srch
url http://repositorio.ufsm.br/handle/1/3773
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
BR
Recursos Florestais e Engenharia Florestal
UFSM
Programa de Pós-Graduação em Engenharia Florestal
publisher.none.fl_str_mv Universidade Federal de Santa Maria
BR
Recursos Florestais e Engenharia Florestal
UFSM
Programa de Pós-Graduação em Engenharia Florestal
dc.source.none.fl_str_mv reponame:Manancial - Repositório Digital da UFSM
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Manancial - Repositório Digital da UFSM
collection Manancial - Repositório Digital da UFSM
repository.name.fl_str_mv Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv atendimento.sib@ufsm.br||tedebc@gmail.com
_version_ 1815172391759773696