Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/6058 |
Resumo: | Objective: The aim of this study was to evaluate the bond strength to enamel and dentin of a self-adhesive resin cement applied with different cementation strategies, using a conventional resin cement as control. Material and Methods: Sixty healthy human molars were selected and allocated into 6 groups (n=10) according to cementation system and dental substrate: ARCe (Adper Single Bond 2 + RelyX ARC in enamel), U100e (RelyX U100 in enamel), a+U100e (Phosphoric acid + RelyX U100 in enamel), ARCd (Adper Single Bond 2 + RelyX ARC in dentin), U100d (RelyX U100 in dentin), a+U100d (Phosphoric acid + RelyX U100 in dentin). Composite resin blocs (Filtek Z250) were confectioned with dimensions of 4mm x 6mm x 4mm to enamel and 7mm x 7mm x 4mm to dentin, and immediately cemented on the surfaces according to each group. Each resin-tooth assembly was stored in 370C distilled water for 24 hours and longitudinally sectioned into two axis producing specimens (sps) with area of approximately 1mm2. The sps were submitted to microtensile test at 1 mm/min and failures were observed with stereomicroscopic magnifying glass with 32x magnification. Data were submitted to Analysis of Variance and Tukey s test (5%). Results: Means (MPa) were: ARCe: 50.5; U100e: 24.5; a+U100e: 53.5; ARCd: 36.0; U100d: 26.7; a+U100d: 25.9. No statistical difference was found between groups that used acid etching in enamel, thus presenting values higher than U100 without previous acid etching. In dentin, values were higher (p<0.05) for ARCd compared to U100d and a+U100d groups, which presented similar results. Conclusions: Previous acid etching prior to cementation in enamel enhanced bonding of self-adhesive cement to dental structure.In dentin this acid etching did not influenced bond strength values of this cement. |
id |
UFSM_94776d3a4b4561e7901541dc147262cc |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/6058 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentinaBond strength evaluation of different systems for adhesive cementation to enamel and dentinCimento resinoso auto-adesivoResistência de uniãoEsmalte e dentina coronáriaSelf-adhesive resin cementBond strengthEnamel and coronal dentinCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIAObjective: The aim of this study was to evaluate the bond strength to enamel and dentin of a self-adhesive resin cement applied with different cementation strategies, using a conventional resin cement as control. Material and Methods: Sixty healthy human molars were selected and allocated into 6 groups (n=10) according to cementation system and dental substrate: ARCe (Adper Single Bond 2 + RelyX ARC in enamel), U100e (RelyX U100 in enamel), a+U100e (Phosphoric acid + RelyX U100 in enamel), ARCd (Adper Single Bond 2 + RelyX ARC in dentin), U100d (RelyX U100 in dentin), a+U100d (Phosphoric acid + RelyX U100 in dentin). Composite resin blocs (Filtek Z250) were confectioned with dimensions of 4mm x 6mm x 4mm to enamel and 7mm x 7mm x 4mm to dentin, and immediately cemented on the surfaces according to each group. Each resin-tooth assembly was stored in 370C distilled water for 24 hours and longitudinally sectioned into two axis producing specimens (sps) with area of approximately 1mm2. The sps were submitted to microtensile test at 1 mm/min and failures were observed with stereomicroscopic magnifying glass with 32x magnification. Data were submitted to Analysis of Variance and Tukey s test (5%). Results: Means (MPa) were: ARCe: 50.5; U100e: 24.5; a+U100e: 53.5; ARCd: 36.0; U100d: 26.7; a+U100d: 25.9. No statistical difference was found between groups that used acid etching in enamel, thus presenting values higher than U100 without previous acid etching. In dentin, values were higher (p<0.05) for ARCd compared to U100d and a+U100d groups, which presented similar results. Conclusions: Previous acid etching prior to cementation in enamel enhanced bonding of self-adhesive cement to dental structure.In dentin this acid etching did not influenced bond strength values of this cement.Objetivo: O objetivo desse trabalho foi avaliar a resistência de união ao esmalte e à dentina, de um cimento resinoso auto-adesivo aplicado com diferentes estratégias de cimentação, utilizando um cimento resinoso convencional como controle. Material e Métodos: Sessenta molares humanos hígidos foram divididos em 6 grupos (n=10) de acordo com o sistema de cimentação e substrato dentário: ARCe (Adper Single Bond 2 + RelyX ARC em esmalte), U100e (RelyX U100 em esmalte), a+U100e (Ácido fosfórico + RelyX U100 em esmalte), ARCd (Adper Single Bond 2 + RelyX ARC em dentina), U100d (RelyX U100 em dentina), a+U100d (Ácido fosfórico + RelyX U100 em dentina). Blocos de resina composta (Filtek Z250) foram confeccionados com dimensões de 4mm x 6mm x 4mm para esmalte e 7mm x 7mm x 4mm para dentina, sendo imediatamente cimentados nas superfícies de acordo com cada grupo. Os conjuntos resina-dente foram armazenados em água destilada à 370C por 24 horas e seccionados longitudinalmente em dois eixos originando corpos-de-prova (cps) com área de aproximadamente 1mm2. Os cps foram submetidos ao ensaio de microtração a 1 mm/min e as falhas foram observadas em lupa estereoscópica com aumento de 32x. Os dados foram submetidos à Análise de Variância e Teste de Tukey (5%). Resultados: As médias (MPa) foram: ARCe: 50,5; U100e: 24,5; a+U100e: 53,5; ARCd: 36,0; U100d: 26,7; a+U100d: 25,9. Não houve diferença estatística entre os grupos que utilizaram condicionamento ácido em esmalte, sendo superiores ao U100 sem condicionamento ácido prévio. Em dentina, os valores apresentaram-se maiores (p<0,05) no grupo ARCd que nos grupos U100d e a+U100d, sendo que esses últimos apresentaram resultados similares. Conclusões: O condicionamento ácido prévio à cimentação em esmalte melhorou a união do cimento auto-adesivo à estrutura dentária e este mesmo condicionamento em dentina, não alterou os valores de resistência de união desse cimento.Universidade Federal de Santa MariaBROdontologiaUFSMPrograma de Pós-Graduação em Ciências OdontológicasJacques, Letícia Borgeshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4713522D9Miranda Júnior, Walter Gomeshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4794374Z8Pozzobon, Roselaine Terezinhahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4773209Z9Mutti, Isabele do Nascimento2010-03-052010-03-052010-01-21info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfMUTTI, Isabele do Nascimento. BOND STRENGTH EVALUATION OF DIFFERENT SYSTEMS FOR ADHESIVE CEMENTATION TO ENAMEL AND DENTIN. 2010. 48 f. Dissertação (Mestrado em Odontologia) - Universidade Federal de Santa Maria, Santa Maria, 2010.http://repositorio.ufsm.br/handle/1/6058porinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2022-01-12T18:42:36Zoai:repositorio.ufsm.br:1/6058Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-01-12T18:42:36Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina Bond strength evaluation of different systems for adhesive cementation to enamel and dentin |
title |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina |
spellingShingle |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina Mutti, Isabele do Nascimento Cimento resinoso auto-adesivo Resistência de união Esmalte e dentina coronária Self-adhesive resin cement Bond strength Enamel and coronal dentin CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
title_short |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina |
title_full |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina |
title_fullStr |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina |
title_full_unstemmed |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina |
title_sort |
Avaliação da resistência de união de diferentes sistemas de cimentação adesiva ao esmalte e a dentina |
author |
Mutti, Isabele do Nascimento |
author_facet |
Mutti, Isabele do Nascimento |
author_role |
author |
dc.contributor.none.fl_str_mv |
Jacques, Letícia Borges http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4713522D9 Miranda Júnior, Walter Gomes http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4794374Z8 Pozzobon, Roselaine Terezinha http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4773209Z9 |
dc.contributor.author.fl_str_mv |
Mutti, Isabele do Nascimento |
dc.subject.por.fl_str_mv |
Cimento resinoso auto-adesivo Resistência de união Esmalte e dentina coronária Self-adhesive resin cement Bond strength Enamel and coronal dentin CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
topic |
Cimento resinoso auto-adesivo Resistência de união Esmalte e dentina coronária Self-adhesive resin cement Bond strength Enamel and coronal dentin CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
description |
Objective: The aim of this study was to evaluate the bond strength to enamel and dentin of a self-adhesive resin cement applied with different cementation strategies, using a conventional resin cement as control. Material and Methods: Sixty healthy human molars were selected and allocated into 6 groups (n=10) according to cementation system and dental substrate: ARCe (Adper Single Bond 2 + RelyX ARC in enamel), U100e (RelyX U100 in enamel), a+U100e (Phosphoric acid + RelyX U100 in enamel), ARCd (Adper Single Bond 2 + RelyX ARC in dentin), U100d (RelyX U100 in dentin), a+U100d (Phosphoric acid + RelyX U100 in dentin). Composite resin blocs (Filtek Z250) were confectioned with dimensions of 4mm x 6mm x 4mm to enamel and 7mm x 7mm x 4mm to dentin, and immediately cemented on the surfaces according to each group. Each resin-tooth assembly was stored in 370C distilled water for 24 hours and longitudinally sectioned into two axis producing specimens (sps) with area of approximately 1mm2. The sps were submitted to microtensile test at 1 mm/min and failures were observed with stereomicroscopic magnifying glass with 32x magnification. Data were submitted to Analysis of Variance and Tukey s test (5%). Results: Means (MPa) were: ARCe: 50.5; U100e: 24.5; a+U100e: 53.5; ARCd: 36.0; U100d: 26.7; a+U100d: 25.9. No statistical difference was found between groups that used acid etching in enamel, thus presenting values higher than U100 without previous acid etching. In dentin, values were higher (p<0.05) for ARCd compared to U100d and a+U100d groups, which presented similar results. Conclusions: Previous acid etching prior to cementation in enamel enhanced bonding of self-adhesive cement to dental structure.In dentin this acid etching did not influenced bond strength values of this cement. |
publishDate |
2010 |
dc.date.none.fl_str_mv |
2010-03-05 2010-03-05 2010-01-21 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
MUTTI, Isabele do Nascimento. BOND STRENGTH EVALUATION OF DIFFERENT SYSTEMS FOR ADHESIVE CEMENTATION TO ENAMEL AND DENTIN. 2010. 48 f. Dissertação (Mestrado em Odontologia) - Universidade Federal de Santa Maria, Santa Maria, 2010. http://repositorio.ufsm.br/handle/1/6058 |
identifier_str_mv |
MUTTI, Isabele do Nascimento. BOND STRENGTH EVALUATION OF DIFFERENT SYSTEMS FOR ADHESIVE CEMENTATION TO ENAMEL AND DENTIN. 2010. 48 f. Dissertação (Mestrado em Odontologia) - Universidade Federal de Santa Maria, Santa Maria, 2010. |
url |
http://repositorio.ufsm.br/handle/1/6058 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Odontologia UFSM Programa de Pós-Graduação em Ciências Odontológicas |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Odontologia UFSM Programa de Pós-Graduação em Ciências Odontológicas |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922029505871872 |