Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS)
Autor(a) principal: | |
---|---|
Data de Publicação: | 2008 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/8458 |
Resumo: | This work presents an efficient lighting system using high intensity light emitting diodes (LEDs). The goal is to develop a compact and low cost electronic circuit to drive and control the current of LEDs disposed in a single enclosure. The proposal aims energy saving, high luminous efficacy and high useful life when replacing traditional lighting systems, as dichroic, incandescent or compact fluorescent lamps by LEDs without any change in electrical system installation. Furthermore, an emergency lighting system integrated into the lamp is proposed, allowing the use of the same equipment in the daily activities, supplied by mains, and under a possible break in the electrical network. To supply the LEDs through the mains with universal input voltage and charge the battery, a Buck converter was employed. To supply the LEDs with a continuous current through the battery, a Boost converter was used. The converters operate at high frequency and control the current through the LEDs independently. The battery can be composed of three rechargeable Ni-MH batteries (1,2 V) or a Li-ion battery (3,6 V). The design attends the Brazilian standard and international standard for emergency lighting systems. To validate the proposed idea, the circuits were designed and implemented. The experimental results are shown with the intention to prove the satisfactory behavior of the lamps. |
id |
UFSM_9f6cea5f26611359345d7db77e289a9b |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/8458 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS)Design and implementation of interior lighting systems using light emitting diodes(LEDS)Lâmpada compactaLâmpada a LEDIluminação de emergênciaConversores CC/CCControle de corrente e LEDs como fonte de luzCompact lampLED lampEmergency lightingDC/DC convertersCurrent control and LEDs as light sourceCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAThis work presents an efficient lighting system using high intensity light emitting diodes (LEDs). The goal is to develop a compact and low cost electronic circuit to drive and control the current of LEDs disposed in a single enclosure. The proposal aims energy saving, high luminous efficacy and high useful life when replacing traditional lighting systems, as dichroic, incandescent or compact fluorescent lamps by LEDs without any change in electrical system installation. Furthermore, an emergency lighting system integrated into the lamp is proposed, allowing the use of the same equipment in the daily activities, supplied by mains, and under a possible break in the electrical network. To supply the LEDs through the mains with universal input voltage and charge the battery, a Buck converter was employed. To supply the LEDs with a continuous current through the battery, a Boost converter was used. The converters operate at high frequency and control the current through the LEDs independently. The battery can be composed of three rechargeable Ni-MH batteries (1,2 V) or a Li-ion battery (3,6 V). The design attends the Brazilian standard and international standard for emergency lighting systems. To validate the proposed idea, the circuits were designed and implemented. The experimental results are shown with the intention to prove the satisfactory behavior of the lamps.Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorEste trabalho apresenta um sistema de iluminação eficiente empregando diodos emissores de luz (LEDs) de alta intensidade. O objetivo é desenvolver um circuito eletrônico, compacto e de baixo custo, para acionamento e controle da corrente dos LEDs contidos em um único invólucro. A proposta visa a racionalização no uso da energia elétrica através de uma elevada eficácia luminosa e longa vida útil na substituição dos sistemas de iluminação tradicionais, como lâmpadas dicróicas, incandescentes ou fluorescentes compactas, por LEDs sem qualquer alteração na instalação elétrica. Além disso, é proposto um sistema de iluminação de emergência integrado a esta lâmpada, permitindo a utilização de um único equipamento para iluminação convencional, alimentada pela rede elétrica, e sob uma possível falha no fornecimento de energia. Para alimentar os LEDs, através da rede elétrica, com tensão de entrada universal e ainda carregar a bateria, um conversor Buck é empregado. Para alimentar os LEDs em corrente contínua através da bateria, um conversor Boost é utilizado. Os conversores operam em alta freqüência e controlam a corrente nos LEDs de forma independente. A bateria pode ser composta por três pilhas recarregáveis de Ni-MH (1,2 V) ou por uma bateria de Li-Ion (3,6 V). O projeto atende às exigências da norma brasileira (NBR 10898) e da norma internacional (IEEE Std 446-1995) para sistemas de iluminação de emergência. Para analisar a idéia proposta, os circuitos são projetados e implementados. Os resultados experimentais são apresentados de forma a comprovar o comportamento satisfatório das lâmpadas.Universidade Federal de Santa MariaBREngenharia ElétricaUFSMPrograma de Pós-Graduação em Engenharia ElétricaPrado, Ricardo Nederson dohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780705P3Campos, Alexandrehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780200P7Braga, Henrique Antônio Carvalhohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780832H2Marchesan, Tiago Bandeirahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4762393D9Pinto, Rafael Adaime2017-05-312017-05-312008-10-31info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfPINTO, Rafael Adaime. Design and implementation of interior lighting systems using light emitting diodes(LEDS). 2008. 138 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2008.http://repositorio.ufsm.br/handle/1/8458porinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2017-07-25T14:46:56Zoai:repositorio.ufsm.br:1/8458Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2017-07-25T14:46:56Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS) Design and implementation of interior lighting systems using light emitting diodes(LEDS) |
title |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS) |
spellingShingle |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS) Pinto, Rafael Adaime Lâmpada compacta Lâmpada a LED Iluminação de emergência Conversores CC/CC Controle de corrente e LEDs como fonte de luz Compact lamp LED lamp Emergency lighting DC/DC converters Current control and LEDs as light source CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
title_short |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS) |
title_full |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS) |
title_fullStr |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS) |
title_full_unstemmed |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS) |
title_sort |
Projeto e implementação de lâmpadas para iluminação de interiores empregando diodos emissores de luz(LEDS) |
author |
Pinto, Rafael Adaime |
author_facet |
Pinto, Rafael Adaime |
author_role |
author |
dc.contributor.none.fl_str_mv |
Prado, Ricardo Nederson do http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780705P3 Campos, Alexandre http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780200P7 Braga, Henrique Antônio Carvalho http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780832H2 Marchesan, Tiago Bandeira http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4762393D9 |
dc.contributor.author.fl_str_mv |
Pinto, Rafael Adaime |
dc.subject.por.fl_str_mv |
Lâmpada compacta Lâmpada a LED Iluminação de emergência Conversores CC/CC Controle de corrente e LEDs como fonte de luz Compact lamp LED lamp Emergency lighting DC/DC converters Current control and LEDs as light source CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
topic |
Lâmpada compacta Lâmpada a LED Iluminação de emergência Conversores CC/CC Controle de corrente e LEDs como fonte de luz Compact lamp LED lamp Emergency lighting DC/DC converters Current control and LEDs as light source CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
description |
This work presents an efficient lighting system using high intensity light emitting diodes (LEDs). The goal is to develop a compact and low cost electronic circuit to drive and control the current of LEDs disposed in a single enclosure. The proposal aims energy saving, high luminous efficacy and high useful life when replacing traditional lighting systems, as dichroic, incandescent or compact fluorescent lamps by LEDs without any change in electrical system installation. Furthermore, an emergency lighting system integrated into the lamp is proposed, allowing the use of the same equipment in the daily activities, supplied by mains, and under a possible break in the electrical network. To supply the LEDs through the mains with universal input voltage and charge the battery, a Buck converter was employed. To supply the LEDs with a continuous current through the battery, a Boost converter was used. The converters operate at high frequency and control the current through the LEDs independently. The battery can be composed of three rechargeable Ni-MH batteries (1,2 V) or a Li-ion battery (3,6 V). The design attends the Brazilian standard and international standard for emergency lighting systems. To validate the proposed idea, the circuits were designed and implemented. The experimental results are shown with the intention to prove the satisfactory behavior of the lamps. |
publishDate |
2008 |
dc.date.none.fl_str_mv |
2008-10-31 2017-05-31 2017-05-31 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
PINTO, Rafael Adaime. Design and implementation of interior lighting systems using light emitting diodes(LEDS). 2008. 138 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2008. http://repositorio.ufsm.br/handle/1/8458 |
identifier_str_mv |
PINTO, Rafael Adaime. Design and implementation of interior lighting systems using light emitting diodes(LEDS). 2008. 138 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal de Santa Maria, Santa Maria, 2008. |
url |
http://repositorio.ufsm.br/handle/1/8458 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Engenharia Elétrica UFSM Programa de Pós-Graduação em Engenharia Elétrica |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Engenharia Elétrica UFSM Programa de Pós-Graduação em Engenharia Elétrica |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922141558800384 |