Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial
Autor(a) principal: | |
---|---|
Data de Publicação: | 2022 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/25923 |
Resumo: | This research sought to statistically analyze whether it is mechanically feasible to replace the use of grout with the same mortar to fill the septa of concrete blocks in tests of prisms subjected to simple axial compression. Two types of prisms were tested, with concrete blocks and one-resistance grout and three-resistance mortar, totaling 108 prisms, this replacement is necessary to avoid bottlenecks during the masonry construction stage, as grout is often produced on site. generating setbacks, thus, it will be possible to add more agility to the work without structurally harming the building. In conclusion, through the analysis of results, it was found that according to the statistical analysis of Student's t, there is no significant difference between the compressive strengths of the prisms that used the 8 MPa settlement and filling mortar and the prisms that used the 10 MPa grout and the 6 MPa laying mortar, in the other prism series there was a significant difference. In addition, regarding the failure mode, it was observed that for prisms mortared with mortar from 6 MPa, there is a similarity with the failure form of grouted prisms. |
id |
UFSM_a535886b2a1daccd6337b1b92745679f |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/25923 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axialEvaluation of the influence of grate replacement by the setting mortar in filling concrete block prisms submitted to axial compressionAlvenaria estruturalBlocos de concretoResistência à compressãoPreenchimento com argamassaPreenchimento com grauteStructural masonryConcrete blocksResistance to compressionMortar fillGrout fillCNPQ::ENGENHARIAS::ENGENHARIA CIVILThis research sought to statistically analyze whether it is mechanically feasible to replace the use of grout with the same mortar to fill the septa of concrete blocks in tests of prisms subjected to simple axial compression. Two types of prisms were tested, with concrete blocks and one-resistance grout and three-resistance mortar, totaling 108 prisms, this replacement is necessary to avoid bottlenecks during the masonry construction stage, as grout is often produced on site. generating setbacks, thus, it will be possible to add more agility to the work without structurally harming the building. In conclusion, through the analysis of results, it was found that according to the statistical analysis of Student's t, there is no significant difference between the compressive strengths of the prisms that used the 8 MPa settlement and filling mortar and the prisms that used the 10 MPa grout and the 6 MPa laying mortar, in the other prism series there was a significant difference. In addition, regarding the failure mode, it was observed that for prisms mortared with mortar from 6 MPa, there is a similarity with the failure form of grouted prisms.Esta pesquisa buscou analisar estatisticamente se é mecanicamente viável substituir a utilização do graute pela mesma argamassa de assentamento no preenchimento dos septos dos blocos de concretos em ensaios de prismas submetidos a compressão axial simples. Foram ensaiadas dois tipos de prismas, com blocos de concreto e graute de uma resistência e argamassas de três resistências, totalizando 108 prismas, esta substituição é necessária para evitar gargalos durante a etapa de construção da alvenaria, pois muitas vezes o graute é produzido em obra gerando contratempos, assim, será possível agregar mais agilidade na obra sem prejudicar estruturalmente a edificação. Como conclusão, por meio da análise de resultados, verificou-se que segundo a análise estatística do t de Student, não há diferença significativa entre as resistências à compressão dos prismas que utilizaram a argamassa de assentamento e preenchimento de 8 MPa e dos prismas que utilizaram o graute de 10 MPa e a argamassa de assentamento de 6 MPa, nas demais séries de prisma houve diferença significativa. Além disso, quanto ao modo de ruptura, observou-se que para prismas argamassados com argamassas a partir de 6 MPa, há semelhança com a forma de ruptura dos prismas grauteados.Universidade Federal de Santa MariaBrasilEngenharia CivilUFSMPrograma de Pós-Graduação em Engenharia CivilCentro de TecnologiaRizzatti, Eduardohttp://lattes.cnpq.br/2907271596071103Donin, ChristianSánchez Filho, Emil De SouzaSchumacher, Taiur2022-08-18T12:28:23Z2022-08-18T12:28:23Z2022-02-25info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://repositorio.ufsm.br/handle/1/25923porAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2022-08-18T12:28:23Zoai:repositorio.ufsm.br:1/25923Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-08-18T12:28:23Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial Evaluation of the influence of grate replacement by the setting mortar in filling concrete block prisms submitted to axial compression |
title |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial |
spellingShingle |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial Schumacher, Taiur Alvenaria estrutural Blocos de concreto Resistência à compressão Preenchimento com argamassa Preenchimento com graute Structural masonry Concrete blocks Resistance to compression Mortar fill Grout fill CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial |
title_full |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial |
title_fullStr |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial |
title_full_unstemmed |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial |
title_sort |
Avaliação da influência da substituição do graute pela argamassa de assentamento no preenchimento de prismas de blocos de concreto submetidos à compressão axial |
author |
Schumacher, Taiur |
author_facet |
Schumacher, Taiur |
author_role |
author |
dc.contributor.none.fl_str_mv |
Rizzatti, Eduardo http://lattes.cnpq.br/2907271596071103 Donin, Christian Sánchez Filho, Emil De Souza |
dc.contributor.author.fl_str_mv |
Schumacher, Taiur |
dc.subject.por.fl_str_mv |
Alvenaria estrutural Blocos de concreto Resistência à compressão Preenchimento com argamassa Preenchimento com graute Structural masonry Concrete blocks Resistance to compression Mortar fill Grout fill CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
topic |
Alvenaria estrutural Blocos de concreto Resistência à compressão Preenchimento com argamassa Preenchimento com graute Structural masonry Concrete blocks Resistance to compression Mortar fill Grout fill CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
This research sought to statistically analyze whether it is mechanically feasible to replace the use of grout with the same mortar to fill the septa of concrete blocks in tests of prisms subjected to simple axial compression. Two types of prisms were tested, with concrete blocks and one-resistance grout and three-resistance mortar, totaling 108 prisms, this replacement is necessary to avoid bottlenecks during the masonry construction stage, as grout is often produced on site. generating setbacks, thus, it will be possible to add more agility to the work without structurally harming the building. In conclusion, through the analysis of results, it was found that according to the statistical analysis of Student's t, there is no significant difference between the compressive strengths of the prisms that used the 8 MPa settlement and filling mortar and the prisms that used the 10 MPa grout and the 6 MPa laying mortar, in the other prism series there was a significant difference. In addition, regarding the failure mode, it was observed that for prisms mortared with mortar from 6 MPa, there is a similarity with the failure form of grouted prisms. |
publishDate |
2022 |
dc.date.none.fl_str_mv |
2022-08-18T12:28:23Z 2022-08-18T12:28:23Z 2022-02-25 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufsm.br/handle/1/25923 |
url |
http://repositorio.ufsm.br/handle/1/25923 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia Civil UFSM Programa de Pós-Graduação em Engenharia Civil Centro de Tecnologia |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria Brasil Engenharia Civil UFSM Programa de Pós-Graduação em Engenharia Civil Centro de Tecnologia |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922137798606848 |