Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico
Autor(a) principal: | |
---|---|
Data de Publicação: | 2007 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/14796 |
Resumo: | This thesis presents the design methodology, the construction of a prototype and the experimental validation of an active vibration damper witch is controlled by a piezoelectric actuator. The proposed device has two flexible metallic bellows connected to a rigid reservoir filled with a viscous fluid. When one of the bellows is connected to a vibrating structure a periodic flow passes through a variable internal orifice and the damping effect is produced. The size of the orifice is adjusted by a piezoelectric control system that positions the conical core into a conical cavity. The damper device finite element computational model was developed considering that the valve body is rigid and that the fluid - structure iteration occurs between the fluid and the flexible bellows. This model is discretized using a lagrangean-eulrian formulation. The actuator has a closed flexible metallic structure that amplifies the displacement produced by an internally mounted stack of piezoelectric ceramic layers, and it is also modeled by the finite element method. The damper prototype was built and experimental tests using impulsive and harmonic excitations were conducted to determine its dynamic behavior and also to validate the developed computational models. The simulation and experimental results are compared by curves that relate the damping coefficient with the size of the orifice. Reduced dynamical models are proposed to represent the behavior of the damper device with fixed and variable orifice sizes. A local classic PID controller for the piezoelectric actuator was design to assure that the valve core assume the correct position, providing the commanded damping coefficient. The damper device was applied to a vibration system that represents the model of a quarter-car vehicle. One on-off controller and another fuzzy controller were design to control the vibrations of the vehicle equipped with the proposed active damper. Experimental tests shown that the damping coefficient values, commanded by the global controller, were achieved in time intervals lesser than 10 milliseconds. These results demonstrate the very good performance of the proposed damper device. |
id |
UFU_1f5775619f7e02617d9e1733ff048bac |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/14796 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétricoDesign, construction and characterization controlled by Piezoelectric ActuatoVibraçãoAmortecedoresTransdutores piezoelétricosMétodo dos elementos finitosAmortecedor ativoControle ativo de vibraçõesElementos finitosAtuadores piezoelétricosInteligência artificialActive damperVibration active controlFinite elements techniquePiezoelectric actuatorSoft computingCNPQ::ENGENHARIAS::ENGENHARIA MECANICAThis thesis presents the design methodology, the construction of a prototype and the experimental validation of an active vibration damper witch is controlled by a piezoelectric actuator. The proposed device has two flexible metallic bellows connected to a rigid reservoir filled with a viscous fluid. When one of the bellows is connected to a vibrating structure a periodic flow passes through a variable internal orifice and the damping effect is produced. The size of the orifice is adjusted by a piezoelectric control system that positions the conical core into a conical cavity. The damper device finite element computational model was developed considering that the valve body is rigid and that the fluid - structure iteration occurs between the fluid and the flexible bellows. This model is discretized using a lagrangean-eulrian formulation. The actuator has a closed flexible metallic structure that amplifies the displacement produced by an internally mounted stack of piezoelectric ceramic layers, and it is also modeled by the finite element method. The damper prototype was built and experimental tests using impulsive and harmonic excitations were conducted to determine its dynamic behavior and also to validate the developed computational models. The simulation and experimental results are compared by curves that relate the damping coefficient with the size of the orifice. Reduced dynamical models are proposed to represent the behavior of the damper device with fixed and variable orifice sizes. A local classic PID controller for the piezoelectric actuator was design to assure that the valve core assume the correct position, providing the commanded damping coefficient. The damper device was applied to a vibration system that represents the model of a quarter-car vehicle. One on-off controller and another fuzzy controller were design to control the vibrations of the vehicle equipped with the proposed active damper. Experimental tests shown that the damping coefficient values, commanded by the global controller, were achieved in time intervals lesser than 10 milliseconds. These results demonstrate the very good performance of the proposed damper device.Fundação de Amparo a Pesquisa do Estado de Minas GeraisDoutor em Engenharia MecânicaEsta tese apresenta o desenvolvimento de uma metodologia de projeto, a construção de um protótipo e a validação experimental de um amortecedor ativo de vibrações controlado por um atuador piezelétrico. O dispositivo proposto contém um circuito hidráulico constituído por dois foles metálicos flexíveis conectados a um reservatório rígido cheio com um fluido viscoso. Quando um dos foles é conectado a uma estrutura vibratória um fluxo de fluido é forçado através de um orifício variável, produzindo o efeito de amortecimento. O tamanho do orifício é ajustado por um sistema piezelétrico de controle que posiciona um obturador cônico numa cavidade cônica. O amortecedor é modelado pela técnica dos elementos finitos considerando que o corpo da válvula rígido e que existe interação entre o fluido interno e a estrutura flexível dos foles. Este modelo é discretizado utilizando uma formulação Lagrangeana Euleriana. O atuador, composto por uma estrutura metálica flexível que amplifica o deslocamento produzido por uma pilha de cerâmicas piezelétricas, também é modelado pela técnica dos elementos finitos. Foi construído um protótipo do amortecedor e realizados ensaios experimentais com excitações impulsivas e harmônicas, para determinar o comportamento dinâmico e para validar os modelos computacionais desenvolvidos. A relação entre o tamanho do orifício e a correspondente força de amortecimento produzida é obtida tanto a partir de simulações feitas com o modelo computacional, como através de ensaios com o protótipo, para valores do tamanho do orifício fixos e variáveis. Propõe-se o uso de modelos dinâmicos reduzidos para representar a dinâmica do amortecedor. Para garantir que o atuador piezelétrico posicione corretamente o obturador da válvula, foi incorporado ao amortecedor um controlador local clássico tipo PID. O amortecedor ativo foi aplicado a um sistema vibratório que representa o modelo de um quarto de um automóvel. Desenvolveu-se projeto de um controlador liga - desliga e de um controlador fuzzy para controlar a vibração do veículo equipado com o amortecedor ativo. Testes experimentais mostraram que as alterações no valor do coeficiente de amortecimento da suspensão, comandadas pelo controlador global, foram realizadas em tempos inferiores a 10 milisegundos, indicando excelente desempenho do amortecedor proposto.Universidade Federal de UberlândiaBRPrograma de Pós-graduação em Engenharia MecânicaEngenhariasUFURibeiro, José Franciscohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787898H0Lépore Neto, Francisco Paulohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780224Z5Santos, Marcelo Braga doshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4707975P7Miranda, Ricardo Fortes dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783854D0Fleury, Agenor de Toledohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4727495Y7Mattos, Márcio Coelho deTeixeira, Rafael Luís2016-06-22T18:39:54Z2015-10-202016-06-22T18:39:54Z2007-02-22info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfapplication/pdfTEIXEIRA, Rafael Luís. Design, construction and characterization controlled by Piezoelectric Actuato. 2007. 223 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2007.https://repositorio.ufu.br/handle/123456789/14796porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-03-10T18:03:23Zoai:repositorio.ufu.br:123456789/14796Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-03-10T18:03:23Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico Design, construction and characterization controlled by Piezoelectric Actuato |
title |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico |
spellingShingle |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico Teixeira, Rafael Luís Vibração Amortecedores Transdutores piezoelétricos Método dos elementos finitos Amortecedor ativo Controle ativo de vibrações Elementos finitos Atuadores piezoelétricos Inteligência artificial Active damper Vibration active control Finite elements technique Piezoelectric actuator Soft computing CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico |
title_full |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico |
title_fullStr |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico |
title_full_unstemmed |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico |
title_sort |
Projeto, construção e caracterização de um amortecedor ativo controlado por atuador piezoelétrico |
author |
Teixeira, Rafael Luís |
author_facet |
Teixeira, Rafael Luís |
author_role |
author |
dc.contributor.none.fl_str_mv |
Ribeiro, José Francisco http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787898H0 Lépore Neto, Francisco Paulo http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780224Z5 Santos, Marcelo Braga dos http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4707975P7 Miranda, Ricardo Fortes de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783854D0 Fleury, Agenor de Toledo http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4727495Y7 Mattos, Márcio Coelho de |
dc.contributor.author.fl_str_mv |
Teixeira, Rafael Luís |
dc.subject.por.fl_str_mv |
Vibração Amortecedores Transdutores piezoelétricos Método dos elementos finitos Amortecedor ativo Controle ativo de vibrações Elementos finitos Atuadores piezoelétricos Inteligência artificial Active damper Vibration active control Finite elements technique Piezoelectric actuator Soft computing CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
topic |
Vibração Amortecedores Transdutores piezoelétricos Método dos elementos finitos Amortecedor ativo Controle ativo de vibrações Elementos finitos Atuadores piezoelétricos Inteligência artificial Active damper Vibration active control Finite elements technique Piezoelectric actuator Soft computing CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
This thesis presents the design methodology, the construction of a prototype and the experimental validation of an active vibration damper witch is controlled by a piezoelectric actuator. The proposed device has two flexible metallic bellows connected to a rigid reservoir filled with a viscous fluid. When one of the bellows is connected to a vibrating structure a periodic flow passes through a variable internal orifice and the damping effect is produced. The size of the orifice is adjusted by a piezoelectric control system that positions the conical core into a conical cavity. The damper device finite element computational model was developed considering that the valve body is rigid and that the fluid - structure iteration occurs between the fluid and the flexible bellows. This model is discretized using a lagrangean-eulrian formulation. The actuator has a closed flexible metallic structure that amplifies the displacement produced by an internally mounted stack of piezoelectric ceramic layers, and it is also modeled by the finite element method. The damper prototype was built and experimental tests using impulsive and harmonic excitations were conducted to determine its dynamic behavior and also to validate the developed computational models. The simulation and experimental results are compared by curves that relate the damping coefficient with the size of the orifice. Reduced dynamical models are proposed to represent the behavior of the damper device with fixed and variable orifice sizes. A local classic PID controller for the piezoelectric actuator was design to assure that the valve core assume the correct position, providing the commanded damping coefficient. The damper device was applied to a vibration system that represents the model of a quarter-car vehicle. One on-off controller and another fuzzy controller were design to control the vibrations of the vehicle equipped with the proposed active damper. Experimental tests shown that the damping coefficient values, commanded by the global controller, were achieved in time intervals lesser than 10 milliseconds. These results demonstrate the very good performance of the proposed damper device. |
publishDate |
2007 |
dc.date.none.fl_str_mv |
2007-02-22 2015-10-20 2016-06-22T18:39:54Z 2016-06-22T18:39:54Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
TEIXEIRA, Rafael Luís. Design, construction and characterization controlled by Piezoelectric Actuato. 2007. 223 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2007. https://repositorio.ufu.br/handle/123456789/14796 |
identifier_str_mv |
TEIXEIRA, Rafael Luís. Design, construction and characterization controlled by Piezoelectric Actuato. 2007. 223 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2007. |
url |
https://repositorio.ufu.br/handle/123456789/14796 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Engenharia Mecânica Engenharias UFU |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Engenharia Mecânica Engenharias UFU |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569558300327936 |