Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/16936 https://doi.org/10.14393/ufu.di.2012.93 |
Resumo: | The aim of this study was to investigate the biomechanical behavior of maxillary premolar teeth regarding root morphology and depth of non-carious cervical lesion - abfraction, submitted to axial and oblique occlusal load. Threedimensional finite element analysis (3D FEA) and strain gauge test was used in extracted maxillary premolars. Single and birradicular roots premolar teeth 3D FEA models were developed using commercial FEA software. For 3D model generation was selected sound maxillary premolar. The tooth was chosen mapped with contact 3D scanner (Model, Roland). The enamel was degraded with hydrochloric acid-10% to perform the coronal dentin scan. Files with extension *. STL (steriolitográficos) were exported to Bio-CAD software (Rhinoceros-3D). Each tooth structure volumes were generated through the association of complex non-regular surfaces (NURBS). The models were exported to the finite element software (Femap, NoranEngineering, USA). Meshing, mechanical properties insertion and boundary conditions were performed in this software. The models generated were: sound, 1,25 mm and 2,5 mm abfraction teeth. A compressive static load of 100 N was applied: axially and 45° angle to the long axis on the palatine surface of the buccal cusp. Two strain gauge were bonded in teeth and these specimens were mounted in a mechanical testing machine. Birradicular sound, 1,25 mm and 2,5 mm abfraction teeth associated with oblique loading showed respectively the highest strain values among samples, 692,6 μS, 1043,31 μS and 1236,14 μS. Single root sound, 1,25 mm and 2,5 mm abfraction teeth associated with oblique loading showed the respective strain values 467,10 μS, 401,51 μS and 420,98 μS. Axial loading showed lower strain rates, ranging from 136.12 to 366.91 μS. The birradicular teeth with cervical furcation, greater lesion depths and oblique loading and the association of these factors promoted a higher stress concentrate in the tooth structure. |
id |
UFU_37724e00f955763156e72c7ada90f30c |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/16936 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superioresElementos finitosTensõesAbfraçãoOclusãoPré-molarDeformaçãoFurcaBiomecânicaMétodos dos elementos finitosFinite element analysisStressAbfractionOcclusionPremolarStrainFurcCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIAThe aim of this study was to investigate the biomechanical behavior of maxillary premolar teeth regarding root morphology and depth of non-carious cervical lesion - abfraction, submitted to axial and oblique occlusal load. Threedimensional finite element analysis (3D FEA) and strain gauge test was used in extracted maxillary premolars. Single and birradicular roots premolar teeth 3D FEA models were developed using commercial FEA software. For 3D model generation was selected sound maxillary premolar. The tooth was chosen mapped with contact 3D scanner (Model, Roland). The enamel was degraded with hydrochloric acid-10% to perform the coronal dentin scan. Files with extension *. STL (steriolitográficos) were exported to Bio-CAD software (Rhinoceros-3D). Each tooth structure volumes were generated through the association of complex non-regular surfaces (NURBS). The models were exported to the finite element software (Femap, NoranEngineering, USA). Meshing, mechanical properties insertion and boundary conditions were performed in this software. The models generated were: sound, 1,25 mm and 2,5 mm abfraction teeth. A compressive static load of 100 N was applied: axially and 45° angle to the long axis on the palatine surface of the buccal cusp. Two strain gauge were bonded in teeth and these specimens were mounted in a mechanical testing machine. Birradicular sound, 1,25 mm and 2,5 mm abfraction teeth associated with oblique loading showed respectively the highest strain values among samples, 692,6 μS, 1043,31 μS and 1236,14 μS. Single root sound, 1,25 mm and 2,5 mm abfraction teeth associated with oblique loading showed the respective strain values 467,10 μS, 401,51 μS and 420,98 μS. Axial loading showed lower strain rates, ranging from 136.12 to 366.91 μS. The birradicular teeth with cervical furcation, greater lesion depths and oblique loading and the association of these factors promoted a higher stress concentrate in the tooth structure.Mestre em OdontologiaO objetivo deste estudo foi investigar o comportamento biomecânico de prémolares superiores relacionando morfologia radicular e profundidade de lesão cervical não cariosa abfração, variando o tipo de carregamento, carga axial e oblíqua, por meio da análise tridimensional de elementos finitos (3D FEA) e teste de extensometria em pré-molares humanos. Dois modelos 3D de prémolar superior sendo uni e outro birradicular foi desenvolvido utilizando um software comercial de FEA. Para geração dos modelos 3D foi selecionado um pré-molar superior hígido. O dente escolhido foi mapeado com scanner de contato 3D (Modela, Roland) e logo após o esmalte foi degradado com ácido clorídrico-10%, para a realização do escaneamento da dentina coronária. Os arquivos *.STL (steriolitográficos) foram exportados para programa Bio-CAD (Rhinoceros-3D). Volumes de cada estrutura dental foram gerados por meio da associação de superfícies complexas não regulares (NURBS). Os modelos foram exportados para o outro software (Femap, NoranEngineering, USA), onde foi realizado o processo de malhagem, inserção das propriedades mecânicas e condições de contorno. Forças de 100 N foram aplicadas axialmente e 45° em relação ao longo eixo na cúspide vestibular dos modelos: hígido e com lesão de abfração de 1,25 e 2,5mm. Para o teste de extensometria foram fixados 02 extensômetros em pré-molares extraídos montados em uma máquina de teste. Como resultados pode-se observar os dentes birradiculares hígidos, com lesão de 1,25mm e 2,5mm quando associados com carga oblíqua apresentaram respectivamente os maiores valores de deformação 692,6 μS, 1043,31 μS e 1236,14 μS. Os dentes hígidos unirradiculares, com lesão de 1,25 e 2,5 mm quando associados a carga oblíqua apresentaram os respectivos valores de deformação 467,10 μS, 401,51 μS e 420,98 μS. Quando os modelos foram submetidos a cargas axiais demonstraram menores taxas de deformação variando de 136.12 a 366.91 μS. Os dentes birradiculares com furca no terço cervical da raíz, com maiores profundidades de lesão quando submetidos a carga oblíqua promoveram os maiores valores de concentração de tensões e deformação na estrutura dentária.Universidade Federal de UberlândiaBRPrograma de Pós-graduação em OdontologiaCiências da SaúdeUFUSoares, Paulo Viniciushttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4774198Z4Quagliatto, Paulo Sérgiohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4773573P3Fonseca, Rodrigo Borgeshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4770435A0Menezes, Murilo de Sousahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4774619D7Souza, Lorraine Vilela de2016-06-22T18:47:29Z2012-04-302016-06-22T18:47:29Z2012-02-28info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfSOUZA, Lorraine Vilela de. Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores. 2012. 88 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2012. DOI https://doi.org/10.14393/ufu.di.2012.93https://repositorio.ufu.br/handle/123456789/16936https://doi.org/10.14393/ufu.di.2012.93porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2022-10-21T16:47:56Zoai:repositorio.ufu.br:123456789/16936Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2022-10-21T16:47:56Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores |
title |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores |
spellingShingle |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores Souza, Lorraine Vilela de Elementos finitos Tensões Abfração Oclusão Pré-molar Deformação Furca Biomecânica Métodos dos elementos finitos Finite element analysis Stress Abfraction Occlusion Premolar Strain Furc CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
title_short |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores |
title_full |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores |
title_fullStr |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores |
title_full_unstemmed |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores |
title_sort |
Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores |
author |
Souza, Lorraine Vilela de |
author_facet |
Souza, Lorraine Vilela de |
author_role |
author |
dc.contributor.none.fl_str_mv |
Soares, Paulo Vinicius http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4774198Z4 Quagliatto, Paulo Sérgio http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4773573P3 Fonseca, Rodrigo Borges http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4770435A0 Menezes, Murilo de Sousa http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4774619D7 |
dc.contributor.author.fl_str_mv |
Souza, Lorraine Vilela de |
dc.subject.por.fl_str_mv |
Elementos finitos Tensões Abfração Oclusão Pré-molar Deformação Furca Biomecânica Métodos dos elementos finitos Finite element analysis Stress Abfraction Occlusion Premolar Strain Furc CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
topic |
Elementos finitos Tensões Abfração Oclusão Pré-molar Deformação Furca Biomecânica Métodos dos elementos finitos Finite element analysis Stress Abfraction Occlusion Premolar Strain Furc CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
description |
The aim of this study was to investigate the biomechanical behavior of maxillary premolar teeth regarding root morphology and depth of non-carious cervical lesion - abfraction, submitted to axial and oblique occlusal load. Threedimensional finite element analysis (3D FEA) and strain gauge test was used in extracted maxillary premolars. Single and birradicular roots premolar teeth 3D FEA models were developed using commercial FEA software. For 3D model generation was selected sound maxillary premolar. The tooth was chosen mapped with contact 3D scanner (Model, Roland). The enamel was degraded with hydrochloric acid-10% to perform the coronal dentin scan. Files with extension *. STL (steriolitográficos) were exported to Bio-CAD software (Rhinoceros-3D). Each tooth structure volumes were generated through the association of complex non-regular surfaces (NURBS). The models were exported to the finite element software (Femap, NoranEngineering, USA). Meshing, mechanical properties insertion and boundary conditions were performed in this software. The models generated were: sound, 1,25 mm and 2,5 mm abfraction teeth. A compressive static load of 100 N was applied: axially and 45° angle to the long axis on the palatine surface of the buccal cusp. Two strain gauge were bonded in teeth and these specimens were mounted in a mechanical testing machine. Birradicular sound, 1,25 mm and 2,5 mm abfraction teeth associated with oblique loading showed respectively the highest strain values among samples, 692,6 μS, 1043,31 μS and 1236,14 μS. Single root sound, 1,25 mm and 2,5 mm abfraction teeth associated with oblique loading showed the respective strain values 467,10 μS, 401,51 μS and 420,98 μS. Axial loading showed lower strain rates, ranging from 136.12 to 366.91 μS. The birradicular teeth with cervical furcation, greater lesion depths and oblique loading and the association of these factors promoted a higher stress concentrate in the tooth structure. |
publishDate |
2012 |
dc.date.none.fl_str_mv |
2012-04-30 2012-02-28 2016-06-22T18:47:29Z 2016-06-22T18:47:29Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SOUZA, Lorraine Vilela de. Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores. 2012. 88 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2012. DOI https://doi.org/10.14393/ufu.di.2012.93 https://repositorio.ufu.br/handle/123456789/16936 https://doi.org/10.14393/ufu.di.2012.93 |
identifier_str_mv |
SOUZA, Lorraine Vilela de. Influência da abfração, morfologia radicular e carregamento no comportamento biomecânico de pré-molares superiores. 2012. 88 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2012. DOI https://doi.org/10.14393/ufu.di.2012.93 |
url |
https://repositorio.ufu.br/handle/123456789/16936 https://doi.org/10.14393/ufu.di.2012.93 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Odontologia Ciências da Saúde UFU |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Odontologia Ciências da Saúde UFU |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569673756934144 |