Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas
Autor(a) principal: | |
---|---|
Data de Publicação: | 2017 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/20852 http://dx.doi.org/10.14393/ufu.di.2018.118 |
Resumo: | This work has as main focus the analysis of the influence that the harmonic distortions and the imbalances exert in the errors of measurement of electric energy in three-phase billing meters of active and reactive power. Such equipment is typically designed to be installed in fully balanced and symmetrical power plants, a fact that does not reflect the current conditions of the distribution network. Initially, the most relevant power calculation methodologies of the literature were raised, and their equations were implemented in a computational environment (MATLAB), in order to obtain comparative indicators between them. After obtaining the comparative results, a standard laboratory structure was set up for tests of energy meters, where they were submitted to a battery of tests with different levels of harmonic distortions and imbalances, according to the proposed test book. Once the tests were carried out, there was a great inconsistency between the results obtained by each meter, so it is necessary to recommend an alternative calculation methodology capable of standardizing the measurements in a way that does not harm the parties involved, whether the electricity utility or the final consumer. Based on the recommendation made, it was implemented in a prototype meter, along with the other methodologies, for comparative purposes. Finally, a measurement campaign was carried out in different plants, with the prototype, where the results obtained for active power measurement showed low deviations in relation to the accuracy class of the meters. However, when considering the reactive energy, the different methodologies showed deviations of more than 20 percent in some plants. |
id |
UFU_4fb880f2deab68f363fa63cdb463c658 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/20852 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradasMethodological proposal for determination of the power factor under distorted and unbalanced conditionsFator de potênciaPower factorMedidores de energia elétricaElectric energy metersQualidade da energia elétricaElectric power qualityResultados experimentaisExperimental resultsCNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIACNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA::TRANSMISSAO DA ENERGIA ELETRICA, DISTRIBUICAO DA ENERGIA ELETRICAThis work has as main focus the analysis of the influence that the harmonic distortions and the imbalances exert in the errors of measurement of electric energy in three-phase billing meters of active and reactive power. Such equipment is typically designed to be installed in fully balanced and symmetrical power plants, a fact that does not reflect the current conditions of the distribution network. Initially, the most relevant power calculation methodologies of the literature were raised, and their equations were implemented in a computational environment (MATLAB), in order to obtain comparative indicators between them. After obtaining the comparative results, a standard laboratory structure was set up for tests of energy meters, where they were submitted to a battery of tests with different levels of harmonic distortions and imbalances, according to the proposed test book. Once the tests were carried out, there was a great inconsistency between the results obtained by each meter, so it is necessary to recommend an alternative calculation methodology capable of standardizing the measurements in a way that does not harm the parties involved, whether the electricity utility or the final consumer. Based on the recommendation made, it was implemented in a prototype meter, along with the other methodologies, for comparative purposes. Finally, a measurement campaign was carried out in different plants, with the prototype, where the results obtained for active power measurement showed low deviations in relation to the accuracy class of the meters. However, when considering the reactive energy, the different methodologies showed deviations of more than 20 percent in some plants.CAPS - Centro de Atenção PsicosocialDissertação (Mestrado)Esse trabalho tem como foco principal a análise da influência que as distorções harmônicas e os desequilíbrios exercem nos erros de medição de energia elétrica em medidores de faturamento trifásicos de potência ativa e reativa. Tais equipamentos tipicamente são concebidos para serem instalados em plantas elétricas totalmente equilibradas e simétricas, fato esse que não reflete as atuais condições da rede de distribuição. Inicialmente, levantou-se as metodologias de cálculo de potência mais relevantes da literatura, sendo suas equações implementadas em ambiente computacional (MATLAB), visando obter indicadores comparativos entre elas. Obtidos os resultados comparativos, montou-se uma estrutura laboratorial padrão para ensaios de medidores de energia, onde os mesmos foram submetidos a uma bateria de ensaios com diferentes níveis de distorções harmônicas e desequilíbrios, conforme o caderno de testes proposto. Realizados os ensaios, notou-se uma grande incoerência entres os resultados obtidos por cada medidor, sendo assim necessário recomendar uma metodologia de cálculo alternativa capaz de padronizar as medições de modo a não prejudicar as partes envolvidas, seja a concessionária de energia elétrica ou o consumidor final. Com base na recomendação feita, a mesma foi implementada em um protótipo de medidor, juntamente com as demais metodologias, para fins comparativos. Por fim, foi realizada uma campanha de medição em diferentes plantas, com o protótipo, onde os resultados obtidos para medição de potência ativa apresentaram baixo desvios em relação a classe de exatidão dos medidores. No entanto, quando considerada a energia reativa, as diferentes metodologias apresentaram desvios superiores a 20 por cento em algumas plantas.Universidade Federal de UberlândiaBrasilPrograma de Pós-graduação em Engenharia ElétricaMacedo Junior, José RubensGondim, Isaque NogueiraRezende, Paulo Henrique OliveiraSantana, Diego Augusto de Lima2018-03-09T14:38:12Z2018-03-09T14:38:12Z2017-12-20info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSANTANA, Diego Augusto de Lima, Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas. 2017. 140 f.Dissertação de Mestrado - Universidade Federal de Uberlândia, Uberlândia, 2017.https://repositorio.ufu.br/handle/123456789/20852http://dx.doi.org/10.14393/ufu.di.2018.118porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-09-21T18:20:41Zoai:repositorio.ufu.br:123456789/20852Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-09-21T18:20:41Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas Methodological proposal for determination of the power factor under distorted and unbalanced conditions |
title |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas |
spellingShingle |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas Santana, Diego Augusto de Lima Fator de potência Power factor Medidores de energia elétrica Electric energy meters Qualidade da energia elétrica Electric power quality Resultados experimentais Experimental results CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA::TRANSMISSAO DA ENERGIA ELETRICA, DISTRIBUICAO DA ENERGIA ELETRICA |
title_short |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas |
title_full |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas |
title_fullStr |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas |
title_full_unstemmed |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas |
title_sort |
Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas |
author |
Santana, Diego Augusto de Lima |
author_facet |
Santana, Diego Augusto de Lima |
author_role |
author |
dc.contributor.none.fl_str_mv |
Macedo Junior, José Rubens Gondim, Isaque Nogueira Rezende, Paulo Henrique Oliveira |
dc.contributor.author.fl_str_mv |
Santana, Diego Augusto de Lima |
dc.subject.por.fl_str_mv |
Fator de potência Power factor Medidores de energia elétrica Electric energy meters Qualidade da energia elétrica Electric power quality Resultados experimentais Experimental results CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA::TRANSMISSAO DA ENERGIA ELETRICA, DISTRIBUICAO DA ENERGIA ELETRICA |
topic |
Fator de potência Power factor Medidores de energia elétrica Electric energy meters Qualidade da energia elétrica Electric power quality Resultados experimentais Experimental results CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA::TRANSMISSAO DA ENERGIA ELETRICA, DISTRIBUICAO DA ENERGIA ELETRICA |
description |
This work has as main focus the analysis of the influence that the harmonic distortions and the imbalances exert in the errors of measurement of electric energy in three-phase billing meters of active and reactive power. Such equipment is typically designed to be installed in fully balanced and symmetrical power plants, a fact that does not reflect the current conditions of the distribution network. Initially, the most relevant power calculation methodologies of the literature were raised, and their equations were implemented in a computational environment (MATLAB), in order to obtain comparative indicators between them. After obtaining the comparative results, a standard laboratory structure was set up for tests of energy meters, where they were submitted to a battery of tests with different levels of harmonic distortions and imbalances, according to the proposed test book. Once the tests were carried out, there was a great inconsistency between the results obtained by each meter, so it is necessary to recommend an alternative calculation methodology capable of standardizing the measurements in a way that does not harm the parties involved, whether the electricity utility or the final consumer. Based on the recommendation made, it was implemented in a prototype meter, along with the other methodologies, for comparative purposes. Finally, a measurement campaign was carried out in different plants, with the prototype, where the results obtained for active power measurement showed low deviations in relation to the accuracy class of the meters. However, when considering the reactive energy, the different methodologies showed deviations of more than 20 percent in some plants. |
publishDate |
2017 |
dc.date.none.fl_str_mv |
2017-12-20 2018-03-09T14:38:12Z 2018-03-09T14:38:12Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SANTANA, Diego Augusto de Lima, Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas. 2017. 140 f.Dissertação de Mestrado - Universidade Federal de Uberlândia, Uberlândia, 2017. https://repositorio.ufu.br/handle/123456789/20852 http://dx.doi.org/10.14393/ufu.di.2018.118 |
identifier_str_mv |
SANTANA, Diego Augusto de Lima, Proposta metodológica para determinação do fator de potência sob condições distorcidas e desequilibradas. 2017. 140 f.Dissertação de Mestrado - Universidade Federal de Uberlândia, Uberlândia, 2017. |
url |
https://repositorio.ufu.br/handle/123456789/20852 http://dx.doi.org/10.14393/ufu.di.2018.118 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Elétrica |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Elétrica |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569626490273792 |