Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/14959 https://doi.org/10.14393/ufu.di.2014.364 |
Resumo: | The expansion of mold and die sector in the last decades together with new technologies and manufacturer competitiveness demand the development of new materials by the metallurgical industries to supply the market with lower cost. When manufacturing mold and dies the highest cost is related to the machining process, therefore each developed material demands a complete study of its machinability, determining its manufacturing characteristics, envisaging a better performance of the process with economy. The objective of the present work is to determine the machinability of two tool steels used for manufacturing of mold and dies, the N2711M, classified as a martensitic steel, and VPATLAS, classified as a banitic steel. The machining characteristics of these two steels were determined by tool life tests, using an optimization program to determine the coefficients of the Expanded Taylor s equation, machining forces, torque, power consumption, surface roughness and analysis of the swarfs when end milling them with coated cemented carbide tools. The results allowed comparisons of the machinability of the materials and it was possible to conclude that in terms of tool life the N2711 steel presented better performance. However, for both materials, lower tool lives were achieved for higher feed rates. As to the surface roughness and machining forces, the results did not show significant differences. These are important results for the mold and die industry that normally uses these steels and also for the tool stell makers. |
id |
UFU_5c0ea95ef769ecaedfefe946226023f4 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/14959 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:40:41Z2014-11-132016-06-22T18:40:41Z2014-07-28MONTALVÃO, Jairo de Almeida. Determination of the machinability of tool steels N2711M and VPATLAS in end milling operation. 2014. 170 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2014. Disponível em: https://doi.org/10.14393/ufu.di.2014.364https://repositorio.ufu.br/handle/123456789/14959https://doi.org/10.14393/ufu.di.2014.364The expansion of mold and die sector in the last decades together with new technologies and manufacturer competitiveness demand the development of new materials by the metallurgical industries to supply the market with lower cost. When manufacturing mold and dies the highest cost is related to the machining process, therefore each developed material demands a complete study of its machinability, determining its manufacturing characteristics, envisaging a better performance of the process with economy. The objective of the present work is to determine the machinability of two tool steels used for manufacturing of mold and dies, the N2711M, classified as a martensitic steel, and VPATLAS, classified as a banitic steel. The machining characteristics of these two steels were determined by tool life tests, using an optimization program to determine the coefficients of the Expanded Taylor s equation, machining forces, torque, power consumption, surface roughness and analysis of the swarfs when end milling them with coated cemented carbide tools. The results allowed comparisons of the machinability of the materials and it was possible to conclude that in terms of tool life the N2711 steel presented better performance. However, for both materials, lower tool lives were achieved for higher feed rates. As to the surface roughness and machining forces, the results did not show significant differences. These are important results for the mold and die industry that normally uses these steels and also for the tool stell makers.A expansão do setor de moldes e matrizes nas últimas décadas aliada a novas tecnologias e competitividade entre os fabricantes de moldes plásticos, faz com que as indústrias metalúrgicas do setor tenham a necessidade de produzir novos materiais para atender o mercado com menor custo. Como na fabricação de moldes e matrizes o maior custo está relacionado ao processo de usinagem, cada material desenvolvido se faz necessário um estudo detalhado de sua usinabilidade, determinando suas características de fabricação, visando um melhor desempenho do processo com economia. Este trabalho tem como objetivo determinar a usinabilidade de dois aços-ferramentas utilizados na fabricação de moldes e matrizes, o aço N2711M, classificado como um aço martensítico, e o aço VPATLAS, classificado como um aço bainítico. As características de usinabilidade dos aços estudados foram determinadas através de ensaios de vida da ferramenta, determinada utilizando um programa de otimização para definir os coeficientes da equação expandida de Taylor, força de usinagem, torque, potência, acabamento superficial e análise de cavacos, no fresamento de topo com ferramentas de metal duro revestidas. Os resultados encontrados nos ensaios permitiram comparações entre a usinabilidade dos dois materiais, onde foi possível concluir que em termos de vida da ferramenta o aço N2711M apresentou melhor desempenho. Entretanto, em ambos os materiais a vida da ferramenta foi reduzida para maiores avanços. Com relação ao acabamento superficial e força de corte os resultados não apresentaram diferenças significativas. Esses resultados são muito importantes para a indústria de moldes e matrizes que utiliza esses aços e para as empresas que produzem esses tipos de materiais.Fundação de Amparo a Pesquisa do Estado de Minas GeraisMestre em Engenharia Mecânicaapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em Engenharia MecânicaUFUBREngenhariasFresamentoEquação expandida de TaylorAços endurecidosOtimização do número de testes de vida das ferramentasForça de usinagemAcabamento superficialFresagem (trabalhos em metal)UsinagemAçoEnd millingExpanded Taylor equationHardened steelsOptimization of the number of tool life testsMachining forcesSurface roughnessCNPQ::ENGENHARIAS::ENGENHARIA MECANICADeterminação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topoDetermination of the machinability of tool steels N2711M and VPATLAS in end milling operationinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisMachado, Álisson Rochahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781203T2Silva, Márcio Bacci dahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4785913J0Souza, Adriano Fagali dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4795773A0http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4326184E1Montalvão, Jairo de Almeida817562684760f38e-67c9-4f29-9dee-77c4e5a21ac4info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILDeterminacaoUsinabilidadeAcos.pdf.jpgDeterminacaoUsinabilidadeAcos.pdf.jpgGenerated Thumbnailimage/jpeg1259https://repositorio.ufu.br/bitstream/123456789/14959/3/DeterminacaoUsinabilidadeAcos.pdf.jpg8e00867a107c9e5e4b895ec0f8b9f1f6MD53ORIGINALDeterminacaoUsinabilidadeAcos.pdfapplication/pdf7407659https://repositorio.ufu.br/bitstream/123456789/14959/1/DeterminacaoUsinabilidadeAcos.pdfae50d8ad89e476cec1d37aeb4e983525MD51TEXTDeterminacaoUsinabilidadeAcos.pdf.txtDeterminacaoUsinabilidadeAcos.pdf.txtExtracted texttext/plain291811https://repositorio.ufu.br/bitstream/123456789/14959/2/DeterminacaoUsinabilidadeAcos.pdf.txtc137c25f88c0a2e2776f4b6d073ef8eeMD52123456789/149592021-09-21 15:58:28.672oai:repositorio.ufu.br:123456789/14959Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-09-21T18:58:28Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo |
dc.title.alternative.eng.fl_str_mv |
Determination of the machinability of tool steels N2711M and VPATLAS in end milling operation |
title |
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo |
spellingShingle |
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo Montalvão, Jairo de Almeida Fresamento Equação expandida de Taylor Aços endurecidos Otimização do número de testes de vida das ferramentas Força de usinagem Acabamento superficial Fresagem (trabalhos em metal) Usinagem Aço End milling Expanded Taylor equation Hardened steels Optimization of the number of tool life tests Machining forces Surface roughness CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo |
title_full |
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo |
title_fullStr |
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo |
title_full_unstemmed |
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo |
title_sort |
Determinação da usinabilidade dos aços ferramentas N2711M e VPATLAS no fresamento de topo |
author |
Montalvão, Jairo de Almeida |
author_facet |
Montalvão, Jairo de Almeida |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Machado, Álisson Rocha |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781203T2 |
dc.contributor.referee1.fl_str_mv |
Silva, Márcio Bacci da |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4785913J0 |
dc.contributor.referee2.fl_str_mv |
Souza, Adriano Fagali de |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4795773A0 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4326184E1 |
dc.contributor.author.fl_str_mv |
Montalvão, Jairo de Almeida |
contributor_str_mv |
Machado, Álisson Rocha Silva, Márcio Bacci da Souza, Adriano Fagali de |
dc.subject.por.fl_str_mv |
Fresamento Equação expandida de Taylor Aços endurecidos Otimização do número de testes de vida das ferramentas Força de usinagem Acabamento superficial Fresagem (trabalhos em metal) Usinagem Aço |
topic |
Fresamento Equação expandida de Taylor Aços endurecidos Otimização do número de testes de vida das ferramentas Força de usinagem Acabamento superficial Fresagem (trabalhos em metal) Usinagem Aço End milling Expanded Taylor equation Hardened steels Optimization of the number of tool life tests Machining forces Surface roughness CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
End milling Expanded Taylor equation Hardened steels Optimization of the number of tool life tests Machining forces Surface roughness |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
The expansion of mold and die sector in the last decades together with new technologies and manufacturer competitiveness demand the development of new materials by the metallurgical industries to supply the market with lower cost. When manufacturing mold and dies the highest cost is related to the machining process, therefore each developed material demands a complete study of its machinability, determining its manufacturing characteristics, envisaging a better performance of the process with economy. The objective of the present work is to determine the machinability of two tool steels used for manufacturing of mold and dies, the N2711M, classified as a martensitic steel, and VPATLAS, classified as a banitic steel. The machining characteristics of these two steels were determined by tool life tests, using an optimization program to determine the coefficients of the Expanded Taylor s equation, machining forces, torque, power consumption, surface roughness and analysis of the swarfs when end milling them with coated cemented carbide tools. The results allowed comparisons of the machinability of the materials and it was possible to conclude that in terms of tool life the N2711 steel presented better performance. However, for both materials, lower tool lives were achieved for higher feed rates. As to the surface roughness and machining forces, the results did not show significant differences. These are important results for the mold and die industry that normally uses these steels and also for the tool stell makers. |
publishDate |
2014 |
dc.date.available.fl_str_mv |
2014-11-13 2016-06-22T18:40:41Z |
dc.date.issued.fl_str_mv |
2014-07-28 |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:40:41Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
MONTALVÃO, Jairo de Almeida. Determination of the machinability of tool steels N2711M and VPATLAS in end milling operation. 2014. 170 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2014. Disponível em: https://doi.org/10.14393/ufu.di.2014.364 |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/14959 |
dc.identifier.doi.por.fl_str_mv |
https://doi.org/10.14393/ufu.di.2014.364 |
identifier_str_mv |
MONTALVÃO, Jairo de Almeida. Determination of the machinability of tool steels N2711M and VPATLAS in end milling operation. 2014. 170 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2014. Disponível em: https://doi.org/10.14393/ufu.di.2014.364 |
url |
https://repositorio.ufu.br/handle/123456789/14959 https://doi.org/10.14393/ufu.di.2014.364 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharias |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/14959/3/DeterminacaoUsinabilidadeAcos.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/14959/1/DeterminacaoUsinabilidadeAcos.pdf https://repositorio.ufu.br/bitstream/123456789/14959/2/DeterminacaoUsinabilidadeAcos.pdf.txt |
bitstream.checksum.fl_str_mv |
8e00867a107c9e5e4b895ec0f8b9f1f6 ae50d8ad89e476cec1d37aeb4e983525 c137c25f88c0a2e2776f4b6d073ef8ee |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1802110500428840960 |