Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração
Autor(a) principal: | |
---|---|
Data de Publicação: | 2008 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/14823 |
Resumo: | Dielectric fluids usually used in electrical discharge machining (EDM) are generally expensive, toxic and demand special storage and disposal procedures. Oil-based dielectric fluids pollute the environment and are subject to the price variations of the international market. Moreover, they are used in large quantities and discarded after short periods of time, thus increasing the production cost. Furthermore, the tendency toward exhausting world oil reserves should not be disconsidered. This paper presents a performance comparison of five vegetal-based dielectric fluids with kerosene and a specific synthetic oil. High speed steel with pre-established fine finishing and wear parameters was utilized, employing both copper and graphite electrodes. The material removal rate (MRR) and wear of the tool electrode were measured. An evaluation of the superficial modifications of the machined material was made including roughness, the morphology, number and lenght of microcracks, the thickness of the recast layer and the heat-affected zone. The modifications of the mechanical properties were evaluated by Vickers micro-hardness testing. In comparison to traditional fluids, using both copper and graphite electrodes, the results show the competitiveness of the vegetal-based fluids, especially in terms of rough regimen. |
id |
UFU_5c109670b3f6ce4ace9244c95ab736a5 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/14823 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:40:03Z2009-05-182016-06-22T18:40:03Z2008-03-31LIMA, Renato Montandon de. The use of vegetal-based dielectric fluids in die-sink EDM processes. 2008. 105 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2008.https://repositorio.ufu.br/handle/123456789/14823Dielectric fluids usually used in electrical discharge machining (EDM) are generally expensive, toxic and demand special storage and disposal procedures. Oil-based dielectric fluids pollute the environment and are subject to the price variations of the international market. Moreover, they are used in large quantities and discarded after short periods of time, thus increasing the production cost. Furthermore, the tendency toward exhausting world oil reserves should not be disconsidered. This paper presents a performance comparison of five vegetal-based dielectric fluids with kerosene and a specific synthetic oil. High speed steel with pre-established fine finishing and wear parameters was utilized, employing both copper and graphite electrodes. The material removal rate (MRR) and wear of the tool electrode were measured. An evaluation of the superficial modifications of the machined material was made including roughness, the morphology, number and lenght of microcracks, the thickness of the recast layer and the heat-affected zone. The modifications of the mechanical properties were evaluated by Vickers micro-hardness testing. In comparison to traditional fluids, using both copper and graphite electrodes, the results show the competitiveness of the vegetal-based fluids, especially in terms of rough regimen.Os fluidos dielétricos usados nos processos de usinagem por descargas elétricas por penetração (EDM) têm, em geral, preços elevados, são tóxicos e apresentam dificuldades para armazenamento e descarte. Os fluidos dielétricos à base de petróleo além de poluírem o meio ambiente, estão sujeitos às variações de preço do mercado internacional, o que acarreta a elevação dos custos de produção. São empregados em grandes quantidades e descartados após pouco tempo de uso. Além disso, a tendência de esgotamento das reservas mundiais de petróleo não deve ser desconsiderada. Este trabalho mostra a comparação do desempenho de 5 fluidos dielétricos de origem vegetal com o querosene e um óleo mineral. Foi usado um aço rápido ABNT M2 com parâmetros pré-estabelecidos de acabamento fino e desbaste com eletrodos de cobre e grafite. Foram medidas as taxas de remoção de material (TRM) e o desgaste dos eletrodos-ferramenta. Foram avaliadas as modificações superficiais no material usinado, como a rugosidade e a morfologia, a quantidade e o comprimento de microtrincas, a espessura das camadas refundidas e da zona afetada pelo calor. As modificações nas propriedades mecânicas foram avaliadas por ensaios de microdureza Vickers. Em comparação com fluidos tradicionais, tanto nas usinagens com eletrodos de cobre quanto de grafite, os resultados mostram a competitividade dos fluidos de origem vegetal, principalmente em termos de desbaste.Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorMestre em Engenharia Mecânicaapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em Engenharia MecânicaUFUBREngenhariasUsinagem por descargas elétricasÓleos vegetaisFluidos dielétricosTaxa de remoção de materialTopografiaUsinagemFluidosEDMVegetal oilsDielectric fluidsMRRTopographyCNPQ::ENGENHARIAS::ENGENHARIA MECANICAUtilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetraçãoThe use of vegetal-based dielectric fluids in die-sink EDM processesinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisRaslan, Alberto Arnaldohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787991J4Mello, José Daniel Biasoli dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783817J1Machado, álisson Rochahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781203T2Bozzi, Antônio Césarhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782425Y2http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4735108Y8Lima, Renato Montandon deinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILRenato.pdf.jpgRenato.pdf.jpgGenerated Thumbnailimage/jpeg1302https://repositorio.ufu.br/bitstream/123456789/14823/3/Renato.pdf.jpgcbdd9ffbaf5f96cd5e94cd8da9a1210eMD53ORIGINALRenato.pdfapplication/pdf4688439https://repositorio.ufu.br/bitstream/123456789/14823/1/Renato.pdf39b0bd4c1f419cd92a57ca613bb026a7MD51TEXTRenato.pdf.txtRenato.pdf.txtExtracted texttext/plain149390https://repositorio.ufu.br/bitstream/123456789/14823/2/Renato.pdf.txtf28c41134f181885bf9ae56f6c0f5e60MD52123456789/148232016-06-23 04:05:19.193oai:repositorio.ufu.br:123456789/14823Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2016-06-23T07:05:19Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração |
dc.title.alternative.eng.fl_str_mv |
The use of vegetal-based dielectric fluids in die-sink EDM processes |
title |
Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração |
spellingShingle |
Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração Lima, Renato Montandon de Usinagem por descargas elétricas Óleos vegetais Fluidos dielétricos Taxa de remoção de material Topografia Usinagem Fluidos EDM Vegetal oils Dielectric fluids MRR Topography CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração |
title_full |
Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração |
title_fullStr |
Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração |
title_full_unstemmed |
Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração |
title_sort |
Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração |
author |
Lima, Renato Montandon de |
author_facet |
Lima, Renato Montandon de |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Raslan, Alberto Arnaldo |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787991J4 |
dc.contributor.referee1.fl_str_mv |
Mello, José Daniel Biasoli de |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783817J1 |
dc.contributor.referee2.fl_str_mv |
Machado, álisson Rocha |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781203T2 |
dc.contributor.referee3.fl_str_mv |
Bozzi, Antônio César |
dc.contributor.referee3Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782425Y2 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4735108Y8 |
dc.contributor.author.fl_str_mv |
Lima, Renato Montandon de |
contributor_str_mv |
Raslan, Alberto Arnaldo Mello, José Daniel Biasoli de Machado, álisson Rocha Bozzi, Antônio César |
dc.subject.por.fl_str_mv |
Usinagem por descargas elétricas Óleos vegetais Fluidos dielétricos Taxa de remoção de material Topografia Usinagem Fluidos |
topic |
Usinagem por descargas elétricas Óleos vegetais Fluidos dielétricos Taxa de remoção de material Topografia Usinagem Fluidos EDM Vegetal oils Dielectric fluids MRR Topography CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
EDM Vegetal oils Dielectric fluids MRR Topography |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
Dielectric fluids usually used in electrical discharge machining (EDM) are generally expensive, toxic and demand special storage and disposal procedures. Oil-based dielectric fluids pollute the environment and are subject to the price variations of the international market. Moreover, they are used in large quantities and discarded after short periods of time, thus increasing the production cost. Furthermore, the tendency toward exhausting world oil reserves should not be disconsidered. This paper presents a performance comparison of five vegetal-based dielectric fluids with kerosene and a specific synthetic oil. High speed steel with pre-established fine finishing and wear parameters was utilized, employing both copper and graphite electrodes. The material removal rate (MRR) and wear of the tool electrode were measured. An evaluation of the superficial modifications of the machined material was made including roughness, the morphology, number and lenght of microcracks, the thickness of the recast layer and the heat-affected zone. The modifications of the mechanical properties were evaluated by Vickers micro-hardness testing. In comparison to traditional fluids, using both copper and graphite electrodes, the results show the competitiveness of the vegetal-based fluids, especially in terms of rough regimen. |
publishDate |
2008 |
dc.date.issued.fl_str_mv |
2008-03-31 |
dc.date.available.fl_str_mv |
2009-05-18 2016-06-22T18:40:03Z |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:40:03Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
LIMA, Renato Montandon de. The use of vegetal-based dielectric fluids in die-sink EDM processes. 2008. 105 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2008. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/14823 |
identifier_str_mv |
LIMA, Renato Montandon de. The use of vegetal-based dielectric fluids in die-sink EDM processes. 2008. 105 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2008. |
url |
https://repositorio.ufu.br/handle/123456789/14823 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharias |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/14823/3/Renato.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/14823/1/Renato.pdf https://repositorio.ufu.br/bitstream/123456789/14823/2/Renato.pdf.txt |
bitstream.checksum.fl_str_mv |
cbdd9ffbaf5f96cd5e94cd8da9a1210e 39b0bd4c1f419cd92a57ca613bb026a7 f28c41134f181885bf9ae56f6c0f5e60 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1802110514567839744 |