Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo
Autor(a) principal: | |
---|---|
Data de Publicação: | 1994 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/30376 http://doi.org/10.14393/ufu.di.1994.8 |
Resumo: | In this work, the influence of the morphology of M7C3 carbides on the results of two body and three body abrasive wear tests was studied. As base material, a high chromium eutectic white cast iron (15% e 30% Cr), unidirectionally solidified (5, 10, 20 e 30 cm/h) , after heat treatment for desestabilizing the austenite to obtain matrix homogenity, was used. The evolution of microstructural parameters associated to the carbides, such as volumetric percentage, dimension and average spacing between them and microhardness and global hardness were caracterizaded by quantitative metallografy and hardness tests. The final microstructure of these alloys showed massives carbides (M7C3) and martensite. The microevents of the abrasive process were analysed considering their mean size relative to the respective mean size, mean distance and volumetric fractions of the carbides. In addition, the effect of the global hardness and the microhardness of the matrix on the wear resistance of these alloys, along with the inherent wear micromechanisms, were evaluated. The results showed a strong influence of the nature and grit size of the abrasive.On the other hand, the results have shown that the global hardness and microhardness of the matrix had pratically no influence on the abrasive wear resistance. Only in the three body tests, the volumetric percentage of the carbides presented some influence on the weight losses, when SiC ((80 was used. Finally, during the observation of the worn surfaces, it was observed a prevailled of microploughing wear mechanism in the two body test while the mechanism prevailled in three body test was plastic microdeformations. |
id |
UFU_5f860fe9af08efaeffe70fdf1b30e683 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/30376 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromoInfluence of the morphology of M7C3 carbides on the abrasion behavior of high-chromium eutectic white cast ironsMorfologiaFerros fundidosCarbonetosAlto cromoCNPQ::ENGENHARIASHidrocarbonetosFerro - FundiçãoIn this work, the influence of the morphology of M7C3 carbides on the results of two body and three body abrasive wear tests was studied. As base material, a high chromium eutectic white cast iron (15% e 30% Cr), unidirectionally solidified (5, 10, 20 e 30 cm/h) , after heat treatment for desestabilizing the austenite to obtain matrix homogenity, was used. The evolution of microstructural parameters associated to the carbides, such as volumetric percentage, dimension and average spacing between them and microhardness and global hardness were caracterizaded by quantitative metallografy and hardness tests. The final microstructure of these alloys showed massives carbides (M7C3) and martensite. The microevents of the abrasive process were analysed considering their mean size relative to the respective mean size, mean distance and volumetric fractions of the carbides. In addition, the effect of the global hardness and the microhardness of the matrix on the wear resistance of these alloys, along with the inherent wear micromechanisms, were evaluated. The results showed a strong influence of the nature and grit size of the abrasive.On the other hand, the results have shown that the global hardness and microhardness of the matrix had pratically no influence on the abrasive wear resistance. Only in the three body tests, the volumetric percentage of the carbides presented some influence on the weight losses, when SiC ((80 was used. Finally, during the observation of the worn surfaces, it was observed a prevailled of microploughing wear mechanism in the two body test while the mechanism prevailled in three body test was plastic microdeformations.Dissertação (Mestrado)Estudou-se a influência da morfologia de carbonetos do tipo M7C3 na abra são a 2 corpos (pino-sobre-disco) e 3 corpos (via úmida), de ferros fundidos brancos eutéticos de alto Cromo (15% e 30% Cr) solidificados unidirecionalmente (5,10,20 e 30 cm/h), após tratamento térmico de desestabilização da austenita com vistas à homogeneização da matriz. A evolução dos parâmetros microestruturais associados aos carbonetos como a porcentagem volumétrica, o tamanho e o espaçamento médio entre eles, bem como a microdureza da matriz e a dureza global, foram caracterizados através de técnicas metalográficas e ensaios de dureza. A microestrutura resultante é constituída por carbonetos massivos do tipo M7C3 suportados em uma matriz metálica predominantemente martensitica. A seguir, os microeventos do processo abrasivo foram analisados, considerando-se o tamanho médio destes em relação ao tamanho e espaçamento médio entre carbonetos e as suas respectivas frações volumétricas. Em adição, avaliou-se o efeito da microdureza da matriz e da dureza global na resistência à abrasão destas ligas. Os resultados dos ensaios de desgaste em ambas as configurações abrasométricas, mostraram uma forte influência da natureza e granulometria do abrasivo. A microdureza da matriz e a dureza global praticamente não interferiram no comportamento abrasivo. Somente no caso da abrasão a 3 corpos é que se pôde notar uma pequena influência da porcentagem volumétrica de carbonetos sobre a taxa de desgaste, quando o abrasivo SiC #80 foi utilizado. Verificou-se, ainda, que valores elevados de espaçamento e tamanho relativos levam a um decréscimo considerável na resistência ao degaste. Einalmente, a observação das superfícies de desgaste permitiram identificar que os micromecanismos predominantes de remoção de matéria foram o microsulcamento e a microdeformação plástica nas configurações a 2 e 3 corpos, respectivamente.Universidade Federal de UberlândiaBrasilPrograma de Pós-graduação em Engenharia MecânicaMello, José Daniel Biasoli dehttp://lattes.cnpq.br/1696467778255755Raslan, Alberto ArnaldoGregolim, José Ângelo RodriguesSantana, Sônia Aparecida2020-11-12T21:56:43Z2020-11-12T21:56:43Z1994info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSANTANA, Sônia Aparecida. Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo. 1994. 105 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2020. DOI http://doi.org/10.14393/ufu.di.1994.8https://repositorio.ufu.br/handle/123456789/30376http://doi.org/10.14393/ufu.di.1994.8porhttp://creativecommons.org/licenses/by-nc-nd/3.0/us/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2020-11-13T06:19:34Zoai:repositorio.ufu.br:123456789/30376Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2020-11-13T06:19:34Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo Influence of the morphology of M7C3 carbides on the abrasion behavior of high-chromium eutectic white cast irons |
title |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo |
spellingShingle |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo Santana, Sônia Aparecida Morfologia Ferros fundidos Carbonetos Alto cromo CNPQ::ENGENHARIAS Hidrocarbonetos Ferro - Fundição |
title_short |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo |
title_full |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo |
title_fullStr |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo |
title_full_unstemmed |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo |
title_sort |
Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo |
author |
Santana, Sônia Aparecida |
author_facet |
Santana, Sônia Aparecida |
author_role |
author |
dc.contributor.none.fl_str_mv |
Mello, José Daniel Biasoli de http://lattes.cnpq.br/1696467778255755 Raslan, Alberto Arnaldo Gregolim, José Ângelo Rodrigues |
dc.contributor.author.fl_str_mv |
Santana, Sônia Aparecida |
dc.subject.por.fl_str_mv |
Morfologia Ferros fundidos Carbonetos Alto cromo CNPQ::ENGENHARIAS Hidrocarbonetos Ferro - Fundição |
topic |
Morfologia Ferros fundidos Carbonetos Alto cromo CNPQ::ENGENHARIAS Hidrocarbonetos Ferro - Fundição |
description |
In this work, the influence of the morphology of M7C3 carbides on the results of two body and three body abrasive wear tests was studied. As base material, a high chromium eutectic white cast iron (15% e 30% Cr), unidirectionally solidified (5, 10, 20 e 30 cm/h) , after heat treatment for desestabilizing the austenite to obtain matrix homogenity, was used. The evolution of microstructural parameters associated to the carbides, such as volumetric percentage, dimension and average spacing between them and microhardness and global hardness were caracterizaded by quantitative metallografy and hardness tests. The final microstructure of these alloys showed massives carbides (M7C3) and martensite. The microevents of the abrasive process were analysed considering their mean size relative to the respective mean size, mean distance and volumetric fractions of the carbides. In addition, the effect of the global hardness and the microhardness of the matrix on the wear resistance of these alloys, along with the inherent wear micromechanisms, were evaluated. The results showed a strong influence of the nature and grit size of the abrasive.On the other hand, the results have shown that the global hardness and microhardness of the matrix had pratically no influence on the abrasive wear resistance. Only in the three body tests, the volumetric percentage of the carbides presented some influence on the weight losses, when SiC ((80 was used. Finally, during the observation of the worn surfaces, it was observed a prevailled of microploughing wear mechanism in the two body test while the mechanism prevailled in three body test was plastic microdeformations. |
publishDate |
1994 |
dc.date.none.fl_str_mv |
1994 2020-11-12T21:56:43Z 2020-11-12T21:56:43Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SANTANA, Sônia Aparecida. Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo. 1994. 105 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2020. DOI http://doi.org/10.14393/ufu.di.1994.8 https://repositorio.ufu.br/handle/123456789/30376 http://doi.org/10.14393/ufu.di.1994.8 |
identifier_str_mv |
SANTANA, Sônia Aparecida. Influência da morfologia de carbonetos do tipo M7C3 no comportamento em abrasão de ferros fundidos brancos eutéticos de alto cromo. 1994. 105 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2020. DOI http://doi.org/10.14393/ufu.di.1994.8 |
url |
https://repositorio.ufu.br/handle/123456789/30376 http://doi.org/10.14393/ufu.di.1994.8 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
http://creativecommons.org/licenses/by-nc-nd/3.0/us/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
http://creativecommons.org/licenses/by-nc-nd/3.0/us/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Mecânica |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Mecânica |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569641481764864 |