Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements
Autor(a) principal: | |
---|---|
Data de Publicação: | 2017 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | eng |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/19516 |
Resumo: | Trabalho de Conclusão de Curso (Graduação) |
id |
UFU_6b7afa156030ee2c752b0e94158c8023 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/19516 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurementsAnálise comparativa de mensurações utilizando microscópio óptico, microscópio eletrônico de varredura e microtomografia computadorizadaMeasurementsDental ImplantsOptical MicroscopeMicro-CTElectron MicroscopeCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOSTrabalho de Conclusão de Curso (Graduação)Microscopic measurements are widely used in scientific research and the correct equipment to realize these evaluations could be critical to determine the study results. Regarding microscopic measurements, three of the most used methods are: Optical Microscopy (OM), Scanning Electron Microscopy (SEM.), and Micro-computed Tomography (MCT). It is important to select which is the best method for assessing diverse parameters, considering the operational characteristics of the method, the equipment efficiency, and the machinery cost. Therefore, the main objective of this study was to define which is the most useful measurement method for assessing magnitudes below 0.55mm. Ten dental implants, with known dimensions as defined by the manufacturer were randomly distributed. Two blinded observers assessed the distance between the second and the third screw vortex of the implants using the three suggested methods. The true distance was defined to be 0.6mm. The assessed distances were. 0.597±0.007 for OM, 0.578±0.017 for SEM, and 0.613±0.006 for MCT. The assessed distances were significantly different when the methods were compared (P>0.01). Despite these differences, all measurements were between the CAD system tolerance, defined to be within 0.05mm. It was possible to conclude that linear measurements below 0.55mm can be performed by any of the described methods.Universidade Federal de UberlândiaBrasilOdontologiaKaram, Frederick KhalilPrado, Célio Jesus doOliveira, Andréa GomesMenezes, Murilo SouzaOliveira, Murilo Navarro2017-08-17T19:13:56Z2017-08-17T19:13:56Z2017-07-05info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisapplication/pdfOLIVEIRA, Murilo Navarro. Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements. 2017. 17 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2017https://repositorio.ufu.br/handle/123456789/19516enginfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-09-28T18:01:16Zoai:repositorio.ufu.br:123456789/19516Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-09-28T18:01:16Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements Análise comparativa de mensurações utilizando microscópio óptico, microscópio eletrônico de varredura e microtomografia computadorizada |
title |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements |
spellingShingle |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements Oliveira, Murilo Navarro Measurements Dental Implants Optical Microscope Micro-CT Electron Microscope CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
title_short |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements |
title_full |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements |
title_fullStr |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements |
title_full_unstemmed |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements |
title_sort |
Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements |
author |
Oliveira, Murilo Navarro |
author_facet |
Oliveira, Murilo Navarro |
author_role |
author |
dc.contributor.none.fl_str_mv |
Karam, Frederick Khalil Prado, Célio Jesus do Oliveira, Andréa Gomes Menezes, Murilo Souza |
dc.contributor.author.fl_str_mv |
Oliveira, Murilo Navarro |
dc.subject.por.fl_str_mv |
Measurements Dental Implants Optical Microscope Micro-CT Electron Microscope CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
topic |
Measurements Dental Implants Optical Microscope Micro-CT Electron Microscope CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
description |
Trabalho de Conclusão de Curso (Graduação) |
publishDate |
2017 |
dc.date.none.fl_str_mv |
2017-08-17T19:13:56Z 2017-08-17T19:13:56Z 2017-07-05 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
OLIVEIRA, Murilo Navarro. Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements. 2017. 17 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2017 https://repositorio.ufu.br/handle/123456789/19516 |
identifier_str_mv |
OLIVEIRA, Murilo Navarro. Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements. 2017. 17 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2017 |
url |
https://repositorio.ufu.br/handle/123456789/19516 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Odontologia |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Odontologia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1813711315978420224 |