Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano.
Autor(a) principal: | |
---|---|
Data de Publicação: | 2019 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/27284 http://dx.doi.org/10.14393/ufu.di.2019.52 |
Resumo: | During oil well drilling, it is essential to control the pressure exerted by the fluid occupying the annular region, formed between the drill string and the sidewall of the well. If the pressure exerted by the fluid is lower than the pore pressure, there will be an undesirable invasion of fluid trapped in the pores into the well. On the other hand, if the pressure exerted by the fluid is very high, the fracture of the rock formation can occur, causing the penetration of the fluid in the rock formation, which in extreme cases can lead to the collapse of the well. The difficulty in controlling the annular pressure when drilling in deep water or ultra-deep water is even greater, since the operating window is usually narrow. In order to adjust the pressure, or weight of the drilling fluid, in the annular region, there is often a need to reduce the density of the fluid. One way to achieve this goal is to inject fine and low density particles into the fluid. Hollow glass spheres is being commonly used. The recovery of these spheres, for later reuse, is fundamental to ensure the economic viability of this method. Mini-hydrocyclones are equipment with great potential for this application because they have high separation efficiency, occupy small space and the capacity limitation can be overcome by installing compact batteries. Hence the purpose of this work is to study the geometric variables: underflow diameter, length of the cylindrical region and angle of the conical region in order to select an geometry for a mini-hydrocyclone (Dc = 30 mm) operating with a pseudoplastic fluid. In the geometry selected, the effects of inlet pressure and sand volumetric concentration on the capacity, liquid ratio, total sand separation efficiency and total spheres separation efficiency were evaluated to determine if spheres were undesirably dragged into the underflow by the sand. The geometry selected showed high efficiency of spheres separation (close to 80%) and sand (94%).Moreover the results demonstrate that for a high sand volumetric concentrations at feed (9%) the sand separation efficiency drops sharply to the order of 68% but high spheres separation efficiencies continue to be achieved, demonstrating that sand is not responsible for a significant drag of spheres to underflow current. |
id |
UFU_8bda78809cf164057c6eb58d50bd7eb5 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/27284 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano.Hydrocyclones applied to solid-liquid separation of suspensions containing: sand, hollow glass beads and non-Newtonian fluid.Eficiência de SeparaçãoHidrociclone modularplanejamento de experimentosfluido de perfuraçãocontrole de densidadeEngenharia QuímicaHidrociclonesPoço de petróleoFluido de perfuraçãoSeparaçãoCNPQ::ENGENHARIAS::ENGENHARIA QUIMICADuring oil well drilling, it is essential to control the pressure exerted by the fluid occupying the annular region, formed between the drill string and the sidewall of the well. If the pressure exerted by the fluid is lower than the pore pressure, there will be an undesirable invasion of fluid trapped in the pores into the well. On the other hand, if the pressure exerted by the fluid is very high, the fracture of the rock formation can occur, causing the penetration of the fluid in the rock formation, which in extreme cases can lead to the collapse of the well. The difficulty in controlling the annular pressure when drilling in deep water or ultra-deep water is even greater, since the operating window is usually narrow. In order to adjust the pressure, or weight of the drilling fluid, in the annular region, there is often a need to reduce the density of the fluid. One way to achieve this goal is to inject fine and low density particles into the fluid. Hollow glass spheres is being commonly used. The recovery of these spheres, for later reuse, is fundamental to ensure the economic viability of this method. Mini-hydrocyclones are equipment with great potential for this application because they have high separation efficiency, occupy small space and the capacity limitation can be overcome by installing compact batteries. Hence the purpose of this work is to study the geometric variables: underflow diameter, length of the cylindrical region and angle of the conical region in order to select an geometry for a mini-hydrocyclone (Dc = 30 mm) operating with a pseudoplastic fluid. In the geometry selected, the effects of inlet pressure and sand volumetric concentration on the capacity, liquid ratio, total sand separation efficiency and total spheres separation efficiency were evaluated to determine if spheres were undesirably dragged into the underflow by the sand. The geometry selected showed high efficiency of spheres separation (close to 80%) and sand (94%).Moreover the results demonstrate that for a high sand volumetric concentrations at feed (9%) the sand separation efficiency drops sharply to the order of 68% but high spheres separation efficiencies continue to be achieved, demonstrating that sand is not responsible for a significant drag of spheres to underflow current.CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorDissertação (Mestrado)Durante a perfuração de um poço de petróleo, o controle da pressão exercida pelo fluido que ocupa a região anular, formada entre a coluna de perfuração e a formação rochosa, é essencial para o sucesso da operação. Se a pressão exercida pelo fluido for menor que a pressão de poros, ocorrerá a indesejável invasão de fluidos aprisionados nesses poros para dentro do poço. Se por outro lado, a pressão exercida pelo fluido for muito alta, pode ocorrer à fratura da formação rochosa, ocasionando a penetração do fluido na formação rochosa, que em casos extremos pode levar ao colapso do poço. Na perfuração em águas profundas e ultraprofundas a dificuldade no controle da pressão no anular é ainda maior, uma vez, que muitas vezes essa faixa operacional é estreita. Para ajustar a pressão ou peso do fluido no espaço anular, tem-se muitas vezes, a necessidade de reduzir a densidade do fluido. Uma das maneiras de atingir esse objetivo é a injeção de partículas sólidas finas de baixa densidade ao fluido, sendo que esferas ocas de vidro são comumente utilizadas. A recuperação de grande parte dessas esferas, para posterior reuso, é primordial para garantir a viabilidade econômica desse procedimento. Mini-hidrociclones são equipamentos com grande potencialidade para essa aplicação por apresentarem elevada eficiência de separação, ocuparem pequeno espaço e poder processar grandes capacidades quando arranjados em baterias compactas. A proposta desse trabalho é estudar as variáveis geométricas diâmetro de underflow, comprimento da região cilíndrica e ângulo da região cônica em busca da seleção de uma geometria para um mini-hidrociclone com diâmetro da região cilíndrica de 30 mm, operando com um fluido pseudoplástico. Obtida a geometria foram então estudados os efeitos da pressão de entrada e da concentração volumétrica de areia nas respostas capacidade, razão de líquido, eficiência total de separação de areia e eficiência total de separação de esferas, sendo esta última resposta usada para avaliar se o arraste indesejado de esferas para corrente de underflow por parte da areia era significativo. A geometria selecionada apresentou alta eficiência total de separação de esferas (próximo de 80%) e de areia (94%). Os resultados do estudo do arraste de esfera demonstra que para concentrações volumétricas de areia na alimentação de 9% a eficiência total de separação de areia cai drasticamente para ordem de 68%, porém altas eficiências de separação de esferas continuam a ser atingidas, demonstrando que areia não é responsável pelo arraste significativo das esferas.Universidade Federal de UberlândiaBrasilPrograma de Pós-graduação em Engenharia QuímicaAtaíde, Carlos Henriquehttp://lattes.cnpq.br/1181660568548980Santana, Ricardo Corrêa deCardoso, Cássia ReginaBicalho, Isabele CristinaAlves, Daniel2019-11-06T15:04:43Z2019-11-06T15:04:43Z2019-02-26info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfALVES, Daniel Gomide. Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não-newtoniano. 2019. 87 f. Dissertação (Mestrado em Engenharia Química) - Universidade Federal de Uberlândia, Uberlândia, 2019. DOI http://dx.doi.org/10.14393/ufu.di.2019.52https://repositorio.ufu.br/handle/123456789/27284http://dx.doi.org/10.14393/ufu.di.2019.52porhttp://creativecommons.org/licenses/by-nc-nd/3.0/us/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-09-14T18:25:45Zoai:repositorio.ufu.br:123456789/27284Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-09-14T18:25:45Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano. Hydrocyclones applied to solid-liquid separation of suspensions containing: sand, hollow glass beads and non-Newtonian fluid. |
title |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano. |
spellingShingle |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano. Alves, Daniel Eficiência de Separação Hidrociclone modular planejamento de experimentos fluido de perfuração controle de densidade Engenharia Química Hidrociclones Poço de petróleo Fluido de perfuração Separação CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
title_short |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano. |
title_full |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano. |
title_fullStr |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano. |
title_full_unstemmed |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano. |
title_sort |
Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não newtoniano. |
author |
Alves, Daniel |
author_facet |
Alves, Daniel |
author_role |
author |
dc.contributor.none.fl_str_mv |
Ataíde, Carlos Henrique http://lattes.cnpq.br/1181660568548980 Santana, Ricardo Corrêa de Cardoso, Cássia Regina Bicalho, Isabele Cristina |
dc.contributor.author.fl_str_mv |
Alves, Daniel |
dc.subject.por.fl_str_mv |
Eficiência de Separação Hidrociclone modular planejamento de experimentos fluido de perfuração controle de densidade Engenharia Química Hidrociclones Poço de petróleo Fluido de perfuração Separação CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
topic |
Eficiência de Separação Hidrociclone modular planejamento de experimentos fluido de perfuração controle de densidade Engenharia Química Hidrociclones Poço de petróleo Fluido de perfuração Separação CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
description |
During oil well drilling, it is essential to control the pressure exerted by the fluid occupying the annular region, formed between the drill string and the sidewall of the well. If the pressure exerted by the fluid is lower than the pore pressure, there will be an undesirable invasion of fluid trapped in the pores into the well. On the other hand, if the pressure exerted by the fluid is very high, the fracture of the rock formation can occur, causing the penetration of the fluid in the rock formation, which in extreme cases can lead to the collapse of the well. The difficulty in controlling the annular pressure when drilling in deep water or ultra-deep water is even greater, since the operating window is usually narrow. In order to adjust the pressure, or weight of the drilling fluid, in the annular region, there is often a need to reduce the density of the fluid. One way to achieve this goal is to inject fine and low density particles into the fluid. Hollow glass spheres is being commonly used. The recovery of these spheres, for later reuse, is fundamental to ensure the economic viability of this method. Mini-hydrocyclones are equipment with great potential for this application because they have high separation efficiency, occupy small space and the capacity limitation can be overcome by installing compact batteries. Hence the purpose of this work is to study the geometric variables: underflow diameter, length of the cylindrical region and angle of the conical region in order to select an geometry for a mini-hydrocyclone (Dc = 30 mm) operating with a pseudoplastic fluid. In the geometry selected, the effects of inlet pressure and sand volumetric concentration on the capacity, liquid ratio, total sand separation efficiency and total spheres separation efficiency were evaluated to determine if spheres were undesirably dragged into the underflow by the sand. The geometry selected showed high efficiency of spheres separation (close to 80%) and sand (94%).Moreover the results demonstrate that for a high sand volumetric concentrations at feed (9%) the sand separation efficiency drops sharply to the order of 68% but high spheres separation efficiencies continue to be achieved, demonstrating that sand is not responsible for a significant drag of spheres to underflow current. |
publishDate |
2019 |
dc.date.none.fl_str_mv |
2019-11-06T15:04:43Z 2019-11-06T15:04:43Z 2019-02-26 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
ALVES, Daniel Gomide. Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não-newtoniano. 2019. 87 f. Dissertação (Mestrado em Engenharia Química) - Universidade Federal de Uberlândia, Uberlândia, 2019. DOI http://dx.doi.org/10.14393/ufu.di.2019.52 https://repositorio.ufu.br/handle/123456789/27284 http://dx.doi.org/10.14393/ufu.di.2019.52 |
identifier_str_mv |
ALVES, Daniel Gomide. Hidrociclones aplicados à separação sólido-líquido de suspensões contendo: areia, esferas ocas de vidro e fluido não-newtoniano. 2019. 87 f. Dissertação (Mestrado em Engenharia Química) - Universidade Federal de Uberlândia, Uberlândia, 2019. DOI http://dx.doi.org/10.14393/ufu.di.2019.52 |
url |
https://repositorio.ufu.br/handle/123456789/27284 http://dx.doi.org/10.14393/ufu.di.2019.52 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
http://creativecommons.org/licenses/by-nc-nd/3.0/us/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
http://creativecommons.org/licenses/by-nc-nd/3.0/us/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Química |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Química |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569596154970112 |