Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/15181 |
Resumo: | Modern civilization is characterized by a large and disorganized energy consumption. As the sun is a renewable energy source, clean and inexhaustible, the operation of its light and heat becomes one of the most promising energy alternatives. Recent studies have encouraged the domestic use of solar energy replacing the use of conventional energy. The industry of solar collectors has been improved, in order to get a lower heat loss and thus a better utilization of solar energy. The use of alternative materials for the construction of collecting plates has been widely researched. This study aims to evaluate and compare the performance of two Low Cost Solar Heaters (LCSH) using PVC and polypropylene as raw material of the collector plate. Assays were performed passive (natural circulation) and active (forced circulation by peristaltic pumps) and with some setup changes in the experimental unit. These tests were performed in the main period of sunshine of the day, with the temperature values obtained by a monitoring system and data acquisition in real time. The information obtained, together with the knowledge of the values of solar radiation provided by a meteorological research center, the National Institute of Meteorology (INMET Instituto Nacional de Meteorologia), allowed the calculation of the efficiency of the collectors, the latter being defined by the ratio of heat absorbed by the plates and radiation total incident on them. Analysis of maximum temperatures attained by the systems \'boiler+plate\', the temperature gradients achieved in each setting, as well as knowledge of time and temperature obtained in the simulation of baths that use water from the reservoir of each backup catcher, lead to conclusion that the use of collector PP, together with the simplest configuration studied (thermosyphon without protection cover), provides water at a temperature for domestic use. This configuration for the LCSH has the advantages, in addition to the affordability of the population that does not yet have this technology, ease of handling and a positive contribution to eco-efficiency and environmental conservation. |
id |
UFU_90b5a7e8d82bd423d9642b2b0e1e19f8 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/15181 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:41:45Z2012-06-052016-06-22T18:41:45Z2010-08-26MORAES, Aline Marques. Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo. 2010. 130 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2010.https://repositorio.ufu.br/handle/123456789/15181Modern civilization is characterized by a large and disorganized energy consumption. As the sun is a renewable energy source, clean and inexhaustible, the operation of its light and heat becomes one of the most promising energy alternatives. Recent studies have encouraged the domestic use of solar energy replacing the use of conventional energy. The industry of solar collectors has been improved, in order to get a lower heat loss and thus a better utilization of solar energy. The use of alternative materials for the construction of collecting plates has been widely researched. This study aims to evaluate and compare the performance of two Low Cost Solar Heaters (LCSH) using PVC and polypropylene as raw material of the collector plate. Assays were performed passive (natural circulation) and active (forced circulation by peristaltic pumps) and with some setup changes in the experimental unit. These tests were performed in the main period of sunshine of the day, with the temperature values obtained by a monitoring system and data acquisition in real time. The information obtained, together with the knowledge of the values of solar radiation provided by a meteorological research center, the National Institute of Meteorology (INMET Instituto Nacional de Meteorologia), allowed the calculation of the efficiency of the collectors, the latter being defined by the ratio of heat absorbed by the plates and radiation total incident on them. Analysis of maximum temperatures attained by the systems \'boiler+plate\', the temperature gradients achieved in each setting, as well as knowledge of time and temperature obtained in the simulation of baths that use water from the reservoir of each backup catcher, lead to conclusion that the use of collector PP, together with the simplest configuration studied (thermosyphon without protection cover), provides water at a temperature for domestic use. This configuration for the LCSH has the advantages, in addition to the affordability of the population that does not yet have this technology, ease of handling and a positive contribution to eco-efficiency and environmental conservation.A civilização moderna caracteriza-se por um grande e desordenado consumo de energia. Sendo o sol uma fonte de energia renovável, não poluente e inesgotável, a exploração de sua luz e calor se torna, sem dúvida, uma das alternativas energéticas mais promissoras da atualidade. Recentemente, estudos têm contribuído no sentido de incentivar o uso domiciliar da energia solar, dentre outros, a fim de substituir o uso da energia convencional. A indústria dos coletores solares vem se aperfeiçoando, com o intuito de obter uma menor perda térmica e, conseqüentemente, um melhor aproveitamento da energia solar. O uso de material alternativo para a construção das placas coletoras vem sendo amplamente pesquisado. O presente trabalho tem como objetivo avaliar e comparar o desempenho de dois Aquecedores Solares de Baixo Custo (ASBC) que utilizam PVC e Polipropileno como matéria-prima da placa coletora. Foram realizados ensaios passivos (circulação natural) e ativos (circulação forçada por bombas peristálticas), associados a algumas mudanças de configuração na unidade experimental. Tais ensaios foram realizados no principal período de insolação do dia, sendo os valores de temperatura obtidos por um sistema de monitoramento e aquisição de dados em tempo real. As informações obtidas, aliadas ao conhecimento dos valores da radiação solar fornecidos por um centro de pesquisas meteorológicas, o Instituto Nacional de Meteorologia (INMET), possibilitaram o cálculo da eficiência dos coletores, sendo esta definida pela razão entre o calor absorvido pelas placas e a radiação total incidente sobre as mesmas. Uma análise das temperaturas máximas atingidas pelos sistemas placa+boiler , dos gradientes de temperatura alcançados em cada configuração, bem como o conhecimento do tempo e da temperatura obtidos na simulação de banhos que utilizam água proveniente do reservatório de cada coletor alternativo, levam à conclusão de que o uso do coletor de PP, aliado à configuração mais simples estudada (termossifão sem proteção transparente), proporciona água a uma temperatura agradável para uso doméstico. Tal configuração para o ASBC apresenta como vantagens, além do custo acessível à parte da população que ainda não dispões dessa tecnologia, a facilidade de manuseio e uma contribuição favorável para a ecoeficiência e conservação do meio ambiente.Mestre em Engenharia Químicaapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em Engenharia QuímicaUFUBREngenhariasPolipropilenoRadiação solarEnergia solarASBCPVCAquecimento solarAquecedores solares de águaPolypropyleneSolar radiationSolar energySolar heatingCNPQ::ENGENHARIAS::ENGENHARIA QUIMICAInfluência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisVieira, Luiz Gustavo Martinshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4767723D6Damasceno, João Jorge Ribeirohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780258E5Ferreira, Juliana de Souzahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4769290P1Soletti, João InácioWatanabe, érika Ohtahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4762096Z9http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4326631Z8Moraes, Aline Marquesinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILd.pdf.jpgd.pdf.jpgGenerated Thumbnailimage/jpeg1292https://repositorio.ufu.br/bitstream/123456789/15181/3/d.pdf.jpg86841e6bf57605b01dfd1fe06275aca2MD53ORIGINALd.pdfapplication/pdf1790254https://repositorio.ufu.br/bitstream/123456789/15181/1/d.pdf3c190f5d28c053da008c3a9311620751MD51TEXTd.pdf.txtd.pdf.txtExtracted texttext/plain212936https://repositorio.ufu.br/bitstream/123456789/15181/2/d.pdf.txt8fde70644e61c05a0c255e35df027f0eMD52123456789/151812017-03-03 13:27:23.68oai:repositorio.ufu.br:123456789/15181Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2017-03-03T16:27:23Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo |
title |
Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo |
spellingShingle |
Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo Moraes, Aline Marques Polipropileno Radiação solar Energia solar ASBC PVC Aquecimento solar Aquecedores solares de água Polypropylene Solar radiation Solar energy Solar heating CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
title_short |
Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo |
title_full |
Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo |
title_fullStr |
Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo |
title_full_unstemmed |
Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo |
title_sort |
Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo |
author |
Moraes, Aline Marques |
author_facet |
Moraes, Aline Marques |
author_role |
author |
dc.contributor.advisor-co1.fl_str_mv |
Vieira, Luiz Gustavo Martins |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4767723D6 |
dc.contributor.advisor1.fl_str_mv |
Damasceno, João Jorge Ribeiro |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780258E5 |
dc.contributor.referee1.fl_str_mv |
Ferreira, Juliana de Souza |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4769290P1 |
dc.contributor.referee2.fl_str_mv |
Soletti, João Inácio |
dc.contributor.referee3.fl_str_mv |
Watanabe, érika Ohta |
dc.contributor.referee3Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4762096Z9 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4326631Z8 |
dc.contributor.author.fl_str_mv |
Moraes, Aline Marques |
contributor_str_mv |
Vieira, Luiz Gustavo Martins Damasceno, João Jorge Ribeiro Ferreira, Juliana de Souza Soletti, João Inácio Watanabe, érika Ohta |
dc.subject.por.fl_str_mv |
Polipropileno Radiação solar Energia solar ASBC PVC Aquecimento solar Aquecedores solares de água |
topic |
Polipropileno Radiação solar Energia solar ASBC PVC Aquecimento solar Aquecedores solares de água Polypropylene Solar radiation Solar energy Solar heating CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
dc.subject.eng.fl_str_mv |
Polypropylene Solar radiation Solar energy Solar heating |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA |
description |
Modern civilization is characterized by a large and disorganized energy consumption. As the sun is a renewable energy source, clean and inexhaustible, the operation of its light and heat becomes one of the most promising energy alternatives. Recent studies have encouraged the domestic use of solar energy replacing the use of conventional energy. The industry of solar collectors has been improved, in order to get a lower heat loss and thus a better utilization of solar energy. The use of alternative materials for the construction of collecting plates has been widely researched. This study aims to evaluate and compare the performance of two Low Cost Solar Heaters (LCSH) using PVC and polypropylene as raw material of the collector plate. Assays were performed passive (natural circulation) and active (forced circulation by peristaltic pumps) and with some setup changes in the experimental unit. These tests were performed in the main period of sunshine of the day, with the temperature values obtained by a monitoring system and data acquisition in real time. The information obtained, together with the knowledge of the values of solar radiation provided by a meteorological research center, the National Institute of Meteorology (INMET Instituto Nacional de Meteorologia), allowed the calculation of the efficiency of the collectors, the latter being defined by the ratio of heat absorbed by the plates and radiation total incident on them. Analysis of maximum temperatures attained by the systems \'boiler+plate\', the temperature gradients achieved in each setting, as well as knowledge of time and temperature obtained in the simulation of baths that use water from the reservoir of each backup catcher, lead to conclusion that the use of collector PP, together with the simplest configuration studied (thermosyphon without protection cover), provides water at a temperature for domestic use. This configuration for the LCSH has the advantages, in addition to the affordability of the population that does not yet have this technology, ease of handling and a positive contribution to eco-efficiency and environmental conservation. |
publishDate |
2010 |
dc.date.issued.fl_str_mv |
2010-08-26 |
dc.date.available.fl_str_mv |
2012-06-05 2016-06-22T18:41:45Z |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:41:45Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
MORAES, Aline Marques. Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo. 2010. 130 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2010. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/15181 |
identifier_str_mv |
MORAES, Aline Marques. Influência do material, tipo de escoamento e proteção transparente sobre o desempenho do coletor de um aquecedor solar de baixo custo. 2010. 130 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2010. |
url |
https://repositorio.ufu.br/handle/123456789/15181 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Engenharia Química |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharias |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/15181/3/d.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/15181/1/d.pdf https://repositorio.ufu.br/bitstream/123456789/15181/2/d.pdf.txt |
bitstream.checksum.fl_str_mv |
86841e6bf57605b01dfd1fe06275aca2 3c190f5d28c053da008c3a9311620751 8fde70644e61c05a0c255e35df027f0e |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1802110572280414208 |