Caracterização fotoeletroquímica de dispositivos para conversão de energia solar

Detalhes bibliográficos
Autor(a) principal: Nascimento, Lucas Leão
Data de Publicação: 2018
Tipo de documento: Trabalho de conclusão de curso
Idioma: por
Título da fonte: Repositório Institucional da UFU
Texto Completo: https://repositorio.ufu.br/handle/123456789/24088
Resumo: This work is focused on the photoelectrochemical characterization of dye-sensitized TiO2 solar cells (DSCs), thin films of Al2O3/Nb2O5 and photoelectrochemical cells applied in the water splitting for fuel production (PECs). The thin films were applied as contact/blocking layer in DSCs. The synthesis of the oxides was done by the sol-gel method, the films were deposited by the self-assembly technique, from Al2O3 (pH ≅ 2) and Nb2O5 (pH ≅ 10). The presence of bilayers generated a 14% increase in overall DSC efficiency. Images of Atomic Force Microscopy (AFM) and Field Emission Scanning Electron Microscopy (FESEM) showed that the films are composed of spherical nanoparticles with homogeneous diameters, covering the entire surface of the conducting glass substrate coated with a conductive layer of fluoride-doped tin oxide (FTO), forming, thus, compact and few porous films. The films also presented higher average roughness (RMS) than the FTO without the bilayers, which increases the contact between the mesoporous TiO2 and the FTO surface, thus increasing the efficiency of the solar cells. Electrochemical Impedance Spectrometry (EIS) studies have shown that these films act to decrease recombination at the mediator/FTO interface. For the PECs, the Incident Photon to Current Efficiency (IPCE) was determined, which showed that there is a significant variation in its quantum efficiency, as a function of its chemical composition. Cells with W(VI) doped BiVO4/Bi4V2O11 films showed IPCE of up to 4.5%, while films that were not doped showed up to 1.5% IPCE.
id UFU_ad5fb45b9f3c20f5a7ad94be20257830
oai_identifier_str oai:repositorio.ufu.br:123456789/24088
network_acronym_str UFU
network_name_str Repositório Institucional da UFU
repository_id_str
spelling Caracterização fotoeletroquímica de dispositivos para conversão de energia solarPhotoelectrochemical characterization of solar energy conversion devicesFotoeletroquímicaConversão de energiaFilmes finosAl2O3/Nb2O5DSCsPhotoelectrochemistryEnergy conversionThin filmsCNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA INORGANICA::FOTO-QUIMICA INORGANICACNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::FISICO-QUIMICA::ELETROQUIMICAThis work is focused on the photoelectrochemical characterization of dye-sensitized TiO2 solar cells (DSCs), thin films of Al2O3/Nb2O5 and photoelectrochemical cells applied in the water splitting for fuel production (PECs). The thin films were applied as contact/blocking layer in DSCs. The synthesis of the oxides was done by the sol-gel method, the films were deposited by the self-assembly technique, from Al2O3 (pH ≅ 2) and Nb2O5 (pH ≅ 10). The presence of bilayers generated a 14% increase in overall DSC efficiency. Images of Atomic Force Microscopy (AFM) and Field Emission Scanning Electron Microscopy (FESEM) showed that the films are composed of spherical nanoparticles with homogeneous diameters, covering the entire surface of the conducting glass substrate coated with a conductive layer of fluoride-doped tin oxide (FTO), forming, thus, compact and few porous films. The films also presented higher average roughness (RMS) than the FTO without the bilayers, which increases the contact between the mesoporous TiO2 and the FTO surface, thus increasing the efficiency of the solar cells. Electrochemical Impedance Spectrometry (EIS) studies have shown that these films act to decrease recombination at the mediator/FTO interface. For the PECs, the Incident Photon to Current Efficiency (IPCE) was determined, which showed that there is a significant variation in its quantum efficiency, as a function of its chemical composition. Cells with W(VI) doped BiVO4/Bi4V2O11 films showed IPCE of up to 4.5%, while films that were not doped showed up to 1.5% IPCE.CNPq - Conselho Nacional de Desenvolvimento Científico e TecnológicoFAPEMIG - Fundação de Amparo a Pesquisa do Estado de Minas GeraisIQUFU - Instituto de Química da Universidade Federal de UberlândiaTrabalho de Conclusão de Curso (Graduação)Este trabalho é focado na caracterização fotoeletroquímica de células solares de TiO2 sensibilizadas por corante (DSCs) contendo filmes finos de Al2O3/Nb2O5 e de células fotoeletroquímicas aplicadas na quebra da água para produção de combustíveis (PECs). Os filmes finos foram aplicados como camada de contato/bloqueio em DSCs. A síntese dos óxidos se deu pelo método sol-gel, os filmes foram depositados por meio da técnica de automontagem, a partir de sóis de Al2O3 (pH ≅ 2) e Nb2O5 (pH ≅ 10). A presença das bicamadas gerou um aumento de 14% na eficiência global nas DSCs. Imagens de Microscopia de Força Atômica (AFM) e Microscopia Eletrônica de Varredura com Emissão de Campo (MEV-SEM) mostraram que os filmes são compostos por nanopartículas esféricas com diâmetros homogêneos, recobrindo toda a superfície do substrato de vidro condutor recoberto com uma camada condutora de óxido de estanho dopado com fluoreto (FTO), formando, assim, filmes compactos e pouco porosos. Os filmes também apresentaram rugosidade média (RMS) maior do que o FTO sem as bicamadas, o que aumenta o contato entre o TiO2 mesoporoso e a superfície do FTO, aumentando assim, a eficiência das células solares. Ensaios de espectrometria de impedância eletroquímica mostraram que esses filmes atuam diminuindo a recombinação na interface mediador/FTO. Já para as PECs determinou-se a eficiência de conversão de fótons em corrente (IPCE), que mostrou que há uma variação significativa na eficiência quântica das mesmas, em função de sua composição química. As células com filmes de BiVO4/Bi4V2O11 com dopagem de W(VI) mostraram IPCE de até 4,5%, enquanto que os filmes que não foram dopados apresentaram IPCE de até 1,5%.Universidade Federal de UberlândiaBrasilQuímica IndustrialPaula, Leonardo Ferreirahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4364539T7Patrocinio, Antonio Otavio de Toledohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4744625U2Canobre, Sheila Cristinahttp://lattes.cnpq.br/1606997598547152Edson, Nossolhttp://lattes.cnpq.br/9330436454964901Nascimento, Lucas Leão2019-01-28T12:53:31Z2019-01-28T12:53:31Z2018-12-07info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisapplication/pdfNASCIMENTO, Lucas Leão. Caracterização fotoeletroquímica de dispositivos para conversão de energia solar. 2018. 40 f. Trabalho de Conclusão de Curso (Graduação em Química Industrial) – Universidade Federal de Uberlândia, Uberlândia, 2019.https://repositorio.ufu.br/handle/123456789/24088porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2019-01-28T12:54:20Zoai:repositorio.ufu.br:123456789/24088Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2019-01-28T12:54:20Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false
dc.title.none.fl_str_mv Caracterização fotoeletroquímica de dispositivos para conversão de energia solar
Photoelectrochemical characterization of solar energy conversion devices
title Caracterização fotoeletroquímica de dispositivos para conversão de energia solar
spellingShingle Caracterização fotoeletroquímica de dispositivos para conversão de energia solar
Nascimento, Lucas Leão
Fotoeletroquímica
Conversão de energia
Filmes finos
Al2O3/Nb2O5
DSCs
Photoelectrochemistry
Energy conversion
Thin films
CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA INORGANICA::FOTO-QUIMICA INORGANICA
CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::FISICO-QUIMICA::ELETROQUIMICA
title_short Caracterização fotoeletroquímica de dispositivos para conversão de energia solar
title_full Caracterização fotoeletroquímica de dispositivos para conversão de energia solar
title_fullStr Caracterização fotoeletroquímica de dispositivos para conversão de energia solar
title_full_unstemmed Caracterização fotoeletroquímica de dispositivos para conversão de energia solar
title_sort Caracterização fotoeletroquímica de dispositivos para conversão de energia solar
author Nascimento, Lucas Leão
author_facet Nascimento, Lucas Leão
author_role author
dc.contributor.none.fl_str_mv Paula, Leonardo Ferreira
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4364539T7
Patrocinio, Antonio Otavio de Toledo
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4744625U2
Canobre, Sheila Cristina
http://lattes.cnpq.br/1606997598547152
Edson, Nossol
http://lattes.cnpq.br/9330436454964901
dc.contributor.author.fl_str_mv Nascimento, Lucas Leão
dc.subject.por.fl_str_mv Fotoeletroquímica
Conversão de energia
Filmes finos
Al2O3/Nb2O5
DSCs
Photoelectrochemistry
Energy conversion
Thin films
CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA INORGANICA::FOTO-QUIMICA INORGANICA
CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::FISICO-QUIMICA::ELETROQUIMICA
topic Fotoeletroquímica
Conversão de energia
Filmes finos
Al2O3/Nb2O5
DSCs
Photoelectrochemistry
Energy conversion
Thin films
CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA INORGANICA::FOTO-QUIMICA INORGANICA
CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::FISICO-QUIMICA::ELETROQUIMICA
description This work is focused on the photoelectrochemical characterization of dye-sensitized TiO2 solar cells (DSCs), thin films of Al2O3/Nb2O5 and photoelectrochemical cells applied in the water splitting for fuel production (PECs). The thin films were applied as contact/blocking layer in DSCs. The synthesis of the oxides was done by the sol-gel method, the films were deposited by the self-assembly technique, from Al2O3 (pH ≅ 2) and Nb2O5 (pH ≅ 10). The presence of bilayers generated a 14% increase in overall DSC efficiency. Images of Atomic Force Microscopy (AFM) and Field Emission Scanning Electron Microscopy (FESEM) showed that the films are composed of spherical nanoparticles with homogeneous diameters, covering the entire surface of the conducting glass substrate coated with a conductive layer of fluoride-doped tin oxide (FTO), forming, thus, compact and few porous films. The films also presented higher average roughness (RMS) than the FTO without the bilayers, which increases the contact between the mesoporous TiO2 and the FTO surface, thus increasing the efficiency of the solar cells. Electrochemical Impedance Spectrometry (EIS) studies have shown that these films act to decrease recombination at the mediator/FTO interface. For the PECs, the Incident Photon to Current Efficiency (IPCE) was determined, which showed that there is a significant variation in its quantum efficiency, as a function of its chemical composition. Cells with W(VI) doped BiVO4/Bi4V2O11 films showed IPCE of up to 4.5%, while films that were not doped showed up to 1.5% IPCE.
publishDate 2018
dc.date.none.fl_str_mv 2018-12-07
2019-01-28T12:53:31Z
2019-01-28T12:53:31Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/bachelorThesis
format bachelorThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv NASCIMENTO, Lucas Leão. Caracterização fotoeletroquímica de dispositivos para conversão de energia solar. 2018. 40 f. Trabalho de Conclusão de Curso (Graduação em Química Industrial) – Universidade Federal de Uberlândia, Uberlândia, 2019.
https://repositorio.ufu.br/handle/123456789/24088
identifier_str_mv NASCIMENTO, Lucas Leão. Caracterização fotoeletroquímica de dispositivos para conversão de energia solar. 2018. 40 f. Trabalho de Conclusão de Curso (Graduação em Química Industrial) – Universidade Federal de Uberlândia, Uberlândia, 2019.
url https://repositorio.ufu.br/handle/123456789/24088
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Uberlândia
Brasil
Química Industrial
publisher.none.fl_str_mv Universidade Federal de Uberlândia
Brasil
Química Industrial
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFU
instname:Universidade Federal de Uberlândia (UFU)
instacron:UFU
instname_str Universidade Federal de Uberlândia (UFU)
instacron_str UFU
institution UFU
reponame_str Repositório Institucional da UFU
collection Repositório Institucional da UFU
repository.name.fl_str_mv Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)
repository.mail.fl_str_mv diinf@dirbi.ufu.br
_version_ 1805569723611480064