Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/14748 |
Resumo: | In machining processes, cutting fluids when properly chosen and applied, may reflect benefits for the manufacture of parts and components. The fluid properties are essential so that it facilitates the machining process and reach as close as possible to the cutting edge, lubricating the chip/tool interface. The fluid can be a major problem for the environment and health of the operator. For this reason, several scientific and technological studies are constantly developed to investigate the performance and environmentally friendly alternative to machining operations. This work studies the effect of vegetable oils (sunflower, canola, soybean, corn and babassu) as cutting fluids applied as MQF - minimal amount of fluid in the machining forces for the drilling process of ABNT 1045 carbon steel, compared with application of fluid in abundance (overhead cooling), dry machining and commercial oil LB2000 as MQF, for different cutting conditions. It was studied the effect of cutting speed, feed rate and length of the hole. At lower feed rates the best results were obtained with canola oil followed by sunflower at higher feed rates. |
id |
UFU_af7b8053f54ed3cdd2179cc1b822e18c |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/14748 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:39:43Z2014-07-052016-06-22T18:39:43Z2013-08-20NEVES, Tiago do Espírito Santo Baldez. Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045. 2013. 209 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2013.https://repositorio.ufu.br/handle/123456789/14748In machining processes, cutting fluids when properly chosen and applied, may reflect benefits for the manufacture of parts and components. The fluid properties are essential so that it facilitates the machining process and reach as close as possible to the cutting edge, lubricating the chip/tool interface. The fluid can be a major problem for the environment and health of the operator. For this reason, several scientific and technological studies are constantly developed to investigate the performance and environmentally friendly alternative to machining operations. This work studies the effect of vegetable oils (sunflower, canola, soybean, corn and babassu) as cutting fluids applied as MQF - minimal amount of fluid in the machining forces for the drilling process of ABNT 1045 carbon steel, compared with application of fluid in abundance (overhead cooling), dry machining and commercial oil LB2000 as MQF, for different cutting conditions. It was studied the effect of cutting speed, feed rate and length of the hole. At lower feed rates the best results were obtained with canola oil followed by sunflower at higher feed rates.Na usinagem, os fluidos de corte, quando escolhidos e aplicados apropriadamente, poderão refletir em benefícios durante os processos de fabricação. O método de aplicação do fluido selecionado deve permitir que o fluido de corte alcance o mais próximo possível da aresta de corte, lubrificando a interface cavaco/ferramenta. As propriedades do fluido são fundamentais para que ele facilite o processo de usinagem. No entanto, o fluido poderá representar grande problema para o meio ambiente e saúde do operador. Por este motivo, vários estudos de cunho científico e tecnológico são constantemente desenvolvidos para investigar o desempenho e alternativas para operações de usinagem. Uma das alternativas seria a utilização de um fluido menos agressivo ao operador e ao meio ambiente. Este trabalho estuda o efeito dos óleos vegetais (girassol, canola, soja, milho e babaçu) como fluidos de corte aplicados na forma Mínima Quantidade de Fluido (MQF), nas forças de usinagem, torque e vida da ferramenta para o processo de furação do aço ABNT 1045, comparados com aplicação de fluido em abundância (jorro), utilizando-se o óleo sintético VONDER, usinagem a seco e óleo comercial LB2000 na forma MQF, para diferentes condições de corte. Foram variadas a velocidade de corte, o avanço e a profundidade do furo. Para utilização de análise estatística, foram utilizados dois níveis, para cada uma das variáveis de corte, com repetição. Os resultados expressam que o melhor desempenho foi do óleo de canola para avanços menores, e o de girassol para avanços maiores.Conselho Nacional de Desenvolvimento Científico e TecnológicoDoutor em Engenharia Mecânicaapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em Engenharia MecânicaUFUBREngenhariasFluidos de corteÓleos vegetaisFuraçãoAço ABNT 1045Técnica MQFAçoCutting fluidsVegetable oilsDrillingABNT 1045 carbon steelMQF techniqueCNPQ::ENGENHARIAS::ENGENHARIA MECANICAInvestigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisRodrigues, Jean Robert Pereirahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4738779P0Silva, Marcio Bacci dahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4785913J0Costa, Éder Silvahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4701060E6Milan, Júlio César Giubileihttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4707312P4Machado, Álisson Rochahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781203T2Alves, Salete Martinshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4768333U7http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4727361U5Neves, Tiago do Espírito Santo Baldez81756539info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILInvestigacaoInfluenciaAplicacao_parte 1.pdf.jpgInvestigacaoInfluenciaAplicacao_parte 1.pdf.jpgGenerated Thumbnailimage/jpeg1271https://repositorio.ufu.br/bitstream/123456789/14748/5/InvestigacaoInfluenciaAplicacao_parte%201.pdf.jpgf8205c6f7963d90821e8005b0bfe532aMD55InvestigacaoInfluenciaAplicacao_parte 2.pdf.jpgInvestigacaoInfluenciaAplicacao_parte 2.pdf.jpgGenerated Thumbnailimage/jpeg1680https://repositorio.ufu.br/bitstream/123456789/14748/6/InvestigacaoInfluenciaAplicacao_parte%202.pdf.jpg82b2c0284ab061c129d58fa9f6dc1715MD56ORIGINALInvestigacaoInfluenciaAplicacao_parte 1.pdfapplication/pdf8239113https://repositorio.ufu.br/bitstream/123456789/14748/1/InvestigacaoInfluenciaAplicacao_parte%201.pdfa0d98a6b5d082af5e2c3baf52a99fd04MD51InvestigacaoInfluenciaAplicacao_parte 2.pdfapplication/pdf8746950https://repositorio.ufu.br/bitstream/123456789/14748/2/InvestigacaoInfluenciaAplicacao_parte%202.pdf008c683e7dce706b785d3f9da66d1e1aMD52TEXTInvestigacaoInfluenciaAplicacao_parte 1.pdf.txtInvestigacaoInfluenciaAplicacao_parte 1.pdf.txtExtracted texttext/plain253666https://repositorio.ufu.br/bitstream/123456789/14748/3/InvestigacaoInfluenciaAplicacao_parte%201.pdf.txt77b9c0298b145eb5ebf4aaea10d85252MD53InvestigacaoInfluenciaAplicacao_parte 2.pdf.txtInvestigacaoInfluenciaAplicacao_parte 2.pdf.txtExtracted texttext/plain100073https://repositorio.ufu.br/bitstream/123456789/14748/4/InvestigacaoInfluenciaAplicacao_parte%202.pdf.txt22b88f01cdd397b810ca3dd888406193MD54123456789/147482021-10-19 16:38:16.718oai:repositorio.ufu.br:123456789/14748Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-10-19T19:38:16Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045 |
title |
Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045 |
spellingShingle |
Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045 Neves, Tiago do Espírito Santo Baldez Fluidos de corte Óleos vegetais Furação Aço ABNT 1045 Técnica MQF Aço Cutting fluids Vegetable oils Drilling ABNT 1045 carbon steel MQF technique CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045 |
title_full |
Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045 |
title_fullStr |
Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045 |
title_full_unstemmed |
Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045 |
title_sort |
Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045 |
author |
Neves, Tiago do Espírito Santo Baldez |
author_facet |
Neves, Tiago do Espírito Santo Baldez |
author_role |
author |
dc.contributor.advisor-co1.fl_str_mv |
Rodrigues, Jean Robert Pereira |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4738779P0 |
dc.contributor.advisor1.fl_str_mv |
Silva, Marcio Bacci da |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4785913J0 |
dc.contributor.referee1.fl_str_mv |
Costa, Éder Silva |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4701060E6 |
dc.contributor.referee2.fl_str_mv |
Milan, Júlio César Giubilei |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4707312P4 |
dc.contributor.referee3.fl_str_mv |
Machado, Álisson Rocha |
dc.contributor.referee3Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781203T2 |
dc.contributor.referee4.fl_str_mv |
Alves, Salete Martins |
dc.contributor.referee4Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4768333U7 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4727361U5 |
dc.contributor.author.fl_str_mv |
Neves, Tiago do Espírito Santo Baldez |
contributor_str_mv |
Rodrigues, Jean Robert Pereira Silva, Marcio Bacci da Costa, Éder Silva Milan, Júlio César Giubilei Machado, Álisson Rocha Alves, Salete Martins |
dc.subject.por.fl_str_mv |
Fluidos de corte Óleos vegetais Furação Aço ABNT 1045 Técnica MQF Aço |
topic |
Fluidos de corte Óleos vegetais Furação Aço ABNT 1045 Técnica MQF Aço Cutting fluids Vegetable oils Drilling ABNT 1045 carbon steel MQF technique CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
Cutting fluids Vegetable oils Drilling ABNT 1045 carbon steel MQF technique |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
In machining processes, cutting fluids when properly chosen and applied, may reflect benefits for the manufacture of parts and components. The fluid properties are essential so that it facilitates the machining process and reach as close as possible to the cutting edge, lubricating the chip/tool interface. The fluid can be a major problem for the environment and health of the operator. For this reason, several scientific and technological studies are constantly developed to investigate the performance and environmentally friendly alternative to machining operations. This work studies the effect of vegetable oils (sunflower, canola, soybean, corn and babassu) as cutting fluids applied as MQF - minimal amount of fluid in the machining forces for the drilling process of ABNT 1045 carbon steel, compared with application of fluid in abundance (overhead cooling), dry machining and commercial oil LB2000 as MQF, for different cutting conditions. It was studied the effect of cutting speed, feed rate and length of the hole. At lower feed rates the best results were obtained with canola oil followed by sunflower at higher feed rates. |
publishDate |
2013 |
dc.date.issued.fl_str_mv |
2013-08-20 |
dc.date.available.fl_str_mv |
2014-07-05 2016-06-22T18:39:43Z |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:39:43Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
NEVES, Tiago do Espírito Santo Baldez. Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045. 2013. 209 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2013. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/14748 |
identifier_str_mv |
NEVES, Tiago do Espírito Santo Baldez. Investigação da influência da aplicação de óleos vegetais comestíveis como fluido de corte no processo de furação do aço ABNT 1045. 2013. 209 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2013. |
url |
https://repositorio.ufu.br/handle/123456789/14748 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharias |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/14748/5/InvestigacaoInfluenciaAplicacao_parte%201.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/14748/6/InvestigacaoInfluenciaAplicacao_parte%202.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/14748/1/InvestigacaoInfluenciaAplicacao_parte%201.pdf https://repositorio.ufu.br/bitstream/123456789/14748/2/InvestigacaoInfluenciaAplicacao_parte%202.pdf https://repositorio.ufu.br/bitstream/123456789/14748/3/InvestigacaoInfluenciaAplicacao_parte%201.pdf.txt https://repositorio.ufu.br/bitstream/123456789/14748/4/InvestigacaoInfluenciaAplicacao_parte%202.pdf.txt |
bitstream.checksum.fl_str_mv |
f8205c6f7963d90821e8005b0bfe532a 82b2c0284ab061c129d58fa9f6dc1715 a0d98a6b5d082af5e2c3baf52a99fd04 008c683e7dce706b785d3f9da66d1e1a 77b9c0298b145eb5ebf4aaea10d85252 22b88f01cdd397b810ca3dd888406193 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1802110343256735744 |