Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/14177 |
Resumo: | The presents study results of the addition of sulfonated polystyrene, derived from discarded plastic cups as additive in mortars. The mortar were studied with polystyrene content of 0.0, 0.2, 0.6, 1.0 and 1.4% (relative to the mass of cement). CPV - ARI Portland cement and sand washed were used at rate 1:4 by weight. It was determined consistency index, water retention, water absorption, void index, static modulus of elasticity, compressive strength, tensile strength in bending and adhesion. The mortar modified with the additive showed increase in the porosity, tensile strength in bending, adhesion, plastic capacity and water retention. Furthermore the use of polystyrene leads to decrease in the density, the modulus of elasticity and in the capillary water absorption with increasing content of sulfonated polystyrene, which may indicate that even by increasing the number pores in the mortar, the pores are not communicated among themselves and the polymeric film had contributed for the mechanical properties. |
id |
UFU_b4b26b65be6db2e93244d4039de64225 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/14177 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:37:20Z2013-02-192016-06-22T18:37:20Z2012-09-17OMENA, Thiago Henrique. Modified mortar with sulfonated polystyrene from wasted plastic cups. 2012. 76 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2012.https://repositorio.ufu.br/handle/123456789/14177The presents study results of the addition of sulfonated polystyrene, derived from discarded plastic cups as additive in mortars. The mortar were studied with polystyrene content of 0.0, 0.2, 0.6, 1.0 and 1.4% (relative to the mass of cement). CPV - ARI Portland cement and sand washed were used at rate 1:4 by weight. It was determined consistency index, water retention, water absorption, void index, static modulus of elasticity, compressive strength, tensile strength in bending and adhesion. The mortar modified with the additive showed increase in the porosity, tensile strength in bending, adhesion, plastic capacity and water retention. Furthermore the use of polystyrene leads to decrease in the density, the modulus of elasticity and in the capillary water absorption with increasing content of sulfonated polystyrene, which may indicate that even by increasing the number pores in the mortar, the pores are not communicated among themselves and the polymeric film had contributed for the mechanical properties.O trabalho apresenta resultados do estudo da adição de poliestireno sulfonado, oriundo de copos plásticos descartados, como aditivo em argamassas. Foram analisadas argamassas com os teores de poliestireno de 0,0; 0,2; 0,6; 1,0 e 1,4% em relação à massa de cimento. Foi utilizado o cimento Portland CPV - ARI e areia lavada no traço 1:4 em massa. Para se avaliar a influência da adição de poliestireno nas propriedades das argamassas determinouse índice de consistência, retenção de água, absorção de água, índice de vazios, módulo estático de elasticidade, resistência à compressão, resistência à tração na flexão e resistência potencial de aderência à tração. Em relação à argamassa sem aditivo a argamassa modificada demonstrou aumento na resistência de aderência à tração, resistência a tração na flexão, porosidade, absorção de água, retenção de água e consistência. No entanto, o aumento do teor de poliestireno sulfonado leva à uma redução do módulo de elasticidade, da massa específica e da absorção de água por capilaridade, o que pode indicar que mesmo aumentando o número de poros na argamassa, estes poros não são intercomunicáveis e o filme polimérico contribui para o incremento das propriedades mecânicas, especialmente à tração.Mestre em Engenharia Civilapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em Engenharia CivilUFUBREngenhariasArgamassa modificadaAditivo poliméricoPoliestireno sulfonadoReciclagemArgamassaPoliestirenoReaproveitamento (Sobras, refugos, etc)Mortar modifiedPolymeric additiveSulfonated polystyreneRecyclingCNPQ::ENGENHARIAS::ENGENHARIA CIVILArgamassa modificada com poliestireno sulfonado a partir de copos plásticos descartadosModified mortar with sulfonated polystyrene from wasted plastic cupsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisMotta, Leila Aparecida de Castrohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4792158H4Dias, João Fernandohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780737E3Gonçalves, Jardel Pereirahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4718519E7Omena, Thiago Henriqueinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILd.pdf.jpgd.pdf.jpgGenerated Thumbnailimage/jpeg1678https://repositorio.ufu.br/bitstream/123456789/14177/3/d.pdf.jpg9f215752eaef2c3495e3d98c7921eb6aMD53ORIGINALd.pdfapplication/pdf1560610https://repositorio.ufu.br/bitstream/123456789/14177/1/d.pdf771c2728a6d20d454b75af517923e7a5MD51TEXTd.pdf.txtd.pdf.txtExtracted texttext/plain115822https://repositorio.ufu.br/bitstream/123456789/14177/2/d.pdf.txtcf673e8e3edda84115afe7c7b69187c3MD52123456789/141772017-06-27 11:13:59.552oai:repositorio.ufu.br:123456789/14177Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2017-06-27T14:13:59Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados |
dc.title.alternative.eng.fl_str_mv |
Modified mortar with sulfonated polystyrene from wasted plastic cups |
title |
Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados |
spellingShingle |
Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados Omena, Thiago Henrique Argamassa modificada Aditivo polimérico Poliestireno sulfonado Reciclagem Argamassa Poliestireno Reaproveitamento (Sobras, refugos, etc) Mortar modified Polymeric additive Sulfonated polystyrene Recycling CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados |
title_full |
Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados |
title_fullStr |
Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados |
title_full_unstemmed |
Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados |
title_sort |
Argamassa modificada com poliestireno sulfonado a partir de copos plásticos descartados |
author |
Omena, Thiago Henrique |
author_facet |
Omena, Thiago Henrique |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Motta, Leila Aparecida de Castro |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4792158H4 |
dc.contributor.referee1.fl_str_mv |
Dias, João Fernando |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780737E3 |
dc.contributor.referee2.fl_str_mv |
Gonçalves, Jardel Pereira |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4718519E7 |
dc.contributor.author.fl_str_mv |
Omena, Thiago Henrique |
contributor_str_mv |
Motta, Leila Aparecida de Castro Dias, João Fernando Gonçalves, Jardel Pereira |
dc.subject.por.fl_str_mv |
Argamassa modificada Aditivo polimérico Poliestireno sulfonado Reciclagem Argamassa Poliestireno Reaproveitamento (Sobras, refugos, etc) |
topic |
Argamassa modificada Aditivo polimérico Poliestireno sulfonado Reciclagem Argamassa Poliestireno Reaproveitamento (Sobras, refugos, etc) Mortar modified Polymeric additive Sulfonated polystyrene Recycling CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
dc.subject.eng.fl_str_mv |
Mortar modified Polymeric additive Sulfonated polystyrene Recycling |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
The presents study results of the addition of sulfonated polystyrene, derived from discarded plastic cups as additive in mortars. The mortar were studied with polystyrene content of 0.0, 0.2, 0.6, 1.0 and 1.4% (relative to the mass of cement). CPV - ARI Portland cement and sand washed were used at rate 1:4 by weight. It was determined consistency index, water retention, water absorption, void index, static modulus of elasticity, compressive strength, tensile strength in bending and adhesion. The mortar modified with the additive showed increase in the porosity, tensile strength in bending, adhesion, plastic capacity and water retention. Furthermore the use of polystyrene leads to decrease in the density, the modulus of elasticity and in the capillary water absorption with increasing content of sulfonated polystyrene, which may indicate that even by increasing the number pores in the mortar, the pores are not communicated among themselves and the polymeric film had contributed for the mechanical properties. |
publishDate |
2012 |
dc.date.issued.fl_str_mv |
2012-09-17 |
dc.date.available.fl_str_mv |
2013-02-19 2016-06-22T18:37:20Z |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:37:20Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
OMENA, Thiago Henrique. Modified mortar with sulfonated polystyrene from wasted plastic cups. 2012. 76 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2012. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/14177 |
identifier_str_mv |
OMENA, Thiago Henrique. Modified mortar with sulfonated polystyrene from wasted plastic cups. 2012. 76 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2012. |
url |
https://repositorio.ufu.br/handle/123456789/14177 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Engenharia Civil |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharias |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/14177/3/d.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/14177/1/d.pdf https://repositorio.ufu.br/bitstream/123456789/14177/2/d.pdf.txt |
bitstream.checksum.fl_str_mv |
9f215752eaef2c3495e3d98c7921eb6a 771c2728a6d20d454b75af517923e7a5 cf673e8e3edda84115afe7c7b69187c3 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1802110331850326016 |