Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado

Detalhes bibliográficos
Autor(a) principal: Oliveira, Tiago José Pires de
Data de Publicação: 2012
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da UFU
Texto Completo: https://repositorio.ufu.br/handle/123456789/15192
https://doi.org/10.14393/ufu.di.2012.88
Resumo: Currently seeking new forms to meet the world\'s energy needs and biomass is an alternative to supply as a source of renewable energy and cleaner. The fluidized bed reactors are widely used for the production of fuel gas, syngas and products such as methanol, bio-oil, etc. Due to its good gas-solid contact, high rates of heat and mass transfer, the beds fludizeds options has become effective for the realization of fast pyrolysis because they favor the physical and chemical processes that occur during pyrolysis. In the fast pyrolysis of biomass in bubbling fluidized bed, the sand is used to ensure homogeneity of mixing and high heat transfer coefficients. These characteristics are fundamental to the kinetics of thermal decomposition of biomass. The fluidization of mixtures of sand and biomass is characterized by particles of different shapes, sizes, densities and compositions (amount of each solid). Therefore this work was to study the fluid-dynamic behavior of the fluid and particles within the bed, and the main objective to determine the minimum fluidization velocities of binary mixtures of biomass and inert. We investigated the fluid dynamics of mixtures of particles fluidized in order to determine an initial composition which mitigates the segregation effect. The segregation is characterized by the difference of the terminal velocity of the particles that make up the mixture, a fact that may occur due to the difference of densities and particle sizes. Therefore, experiments with mixtures of biomass and inert were conducted by varying the composition of biomass and the main fluid dynamic information were measured. The materials used were the work of the stalk of tobacco dust and sand Brazilian standard normal (IPT). Regarding the parameters studied in the fluid dynamics of mixtures, the experiments allowed a better understanding of the mechanisms of segregation. Overall, in all mixtures used in the experiments we observed a concentration of inert along the bottom, whereas the biomass, less dense, concentrated mainly at the top of the annular region. As for the percentage by weight of biomass, which in the experiments were 5, 10 and 15%, it was observed that for mixtures with 15% of biomass is the formation of preferential channels, packing the bed and the presence of bubbles. The minimum fluidization velocities of these binary mixtures were obtained experimentally and the values were compared with some correlations reported in the literature.
id UFU_c32b97bd21909ec9ce9afdec4d63a1e9
oai_identifier_str oai:repositorio.ufu.br:123456789/15192
network_acronym_str UFU
network_name_str Repositório Institucional da UFU
repository_id_str
spelling Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizadoFluidodinâmicaVelocidade de mínima fluidizaçãoBiomassaLeito fluidizadoFluidizaçãoFluid dynamicsMinimum fluidization velocityBiomassFluidized bedCNPQ::ENGENHARIAS::ENGENHARIA QUIMICACurrently seeking new forms to meet the world\'s energy needs and biomass is an alternative to supply as a source of renewable energy and cleaner. The fluidized bed reactors are widely used for the production of fuel gas, syngas and products such as methanol, bio-oil, etc. Due to its good gas-solid contact, high rates of heat and mass transfer, the beds fludizeds options has become effective for the realization of fast pyrolysis because they favor the physical and chemical processes that occur during pyrolysis. In the fast pyrolysis of biomass in bubbling fluidized bed, the sand is used to ensure homogeneity of mixing and high heat transfer coefficients. These characteristics are fundamental to the kinetics of thermal decomposition of biomass. The fluidization of mixtures of sand and biomass is characterized by particles of different shapes, sizes, densities and compositions (amount of each solid). Therefore this work was to study the fluid-dynamic behavior of the fluid and particles within the bed, and the main objective to determine the minimum fluidization velocities of binary mixtures of biomass and inert. We investigated the fluid dynamics of mixtures of particles fluidized in order to determine an initial composition which mitigates the segregation effect. The segregation is characterized by the difference of the terminal velocity of the particles that make up the mixture, a fact that may occur due to the difference of densities and particle sizes. Therefore, experiments with mixtures of biomass and inert were conducted by varying the composition of biomass and the main fluid dynamic information were measured. The materials used were the work of the stalk of tobacco dust and sand Brazilian standard normal (IPT). Regarding the parameters studied in the fluid dynamics of mixtures, the experiments allowed a better understanding of the mechanisms of segregation. Overall, in all mixtures used in the experiments we observed a concentration of inert along the bottom, whereas the biomass, less dense, concentrated mainly at the top of the annular region. As for the percentage by weight of biomass, which in the experiments were 5, 10 and 15%, it was observed that for mixtures with 15% of biomass is the formation of preferential channels, packing the bed and the presence of bubbles. The minimum fluidization velocities of these binary mixtures were obtained experimentally and the values were compared with some correlations reported in the literature.Fundação de Amparo a Pesquisa do Estado de Minas GeraisMestre em Engenharia QuímicaAtualmente buscam-se novas formas para suprir as necessidades energéticas do planeta e a biomassa é uma das alternativas para abastecimento como fonte de energia renovável e mais limpa. Os reatores de leito fluidizado são amplamente utilizados para a produção de gás combustível, gás de síntese e produtos como metanol, bio-óleo, etc. Por apresentar bom contato gás-sólido, altas taxas de transferência de calor e massa, os leitos fluidizados tem se tornado opções eficientes para a realização da pirólise rápida, pois favorecem os processos físico-químicos que ocorrem durante a pirólise. Na pirólise rápida de biomassas em leito fluidizado borbulhante, o inerte (areia) é utilizado para garantir maior homogeneidade da mistura e elevados coeficientes de transferência de calor. Essas características são fundamentais para a cinética de decomposição térmica da biomassa. A fluidização de misturas de areia e biomassa é caracterizada por partículas de diferentes formas, tamanhos, densidades e composições (quantidade de cada sólido). Portanto, este trabalho teve como objetivo estudar o comportamento fluidodinâmico do fluido e das partículas no interior do leito, e como objetivo principal determinar as velocidades de mínima fluidização das misturas binárias de biomassa e inerte. Foi investigada a fluidodinâmica de misturas de partículas em leito fluidizado, a fim de determinar uma composição inicial em que atenue o efeito de segregação. A segregação é caracterizada pela diferença da velocidade terminal das partículas que compõem a mistura, fato esse que pode ocorrer devido à diferença de densidades e tamanhos das partículas. Portanto, experimentos com misturas de biomassa e inertes foram realizados, variando a composição de biomassa e as principais informações fluidodinâmicas foram medidas. Os materiais utilizados no trabalho desenvolvido foram pó do talo de tabaco e a areia normal padronizada brasileira (IPT). Em relação aos parâmetros estudados na fluidodinâmica de misturas, os experimentos possibilitaram uma melhor compreensão dos mecanismos de segregação. De forma geral, em todas as misturas utilizadas nos experimentos observou-se uma concentração de inerte no fundo do leito, enquanto que a biomassa, menos densa, se concentrou preferencialmente na região superior da região anular. Quanto à porcentagem de biomassa em peso, que nos experimentos foram de 5, 10 e 15%, observou-se que para misturas com 15% de biomassa ocorre a formação de canais preferenciais, empacotamento do leito e a presença de slugging. As velocidades mínimas de fluidização dessas misturas binárias foram obtidas experimentalmente e os valores foram confrontados com algumas correlações reportadas na literatura.Universidade Federal de UberlândiaBRPrograma de Pós-graduação em Engenharia QuímicaEngenhariasUFUAtaíde, Carlos Henriquehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787952H6Duarte, Claudio Robertohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708473P5Béttega, Rodrigohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4777874P8Béttega, Vádila Giovana GuerraOliveira, Tiago José Pires de2016-06-22T18:41:46Z2013-02-182016-06-22T18:41:46Z2012-02-27info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfOLIVEIRA, Tiago José Pires de. Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado. 2012. 84 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2012. DOI https://doi.org/10.14393/ufu.di.2012.88https://repositorio.ufu.br/handle/123456789/15192https://doi.org/10.14393/ufu.di.2012.88porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2022-10-21T16:45:31Zoai:repositorio.ufu.br:123456789/15192Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2022-10-21T16:45:31Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false
dc.title.none.fl_str_mv Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado
title Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado
spellingShingle Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado
Oliveira, Tiago José Pires de
Fluidodinâmica
Velocidade de mínima fluidização
Biomassa
Leito fluidizado
Fluidização
Fluid dynamics
Minimum fluidization velocity
Biomass
Fluidized bed
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
title_short Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado
title_full Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado
title_fullStr Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado
title_full_unstemmed Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado
title_sort Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado
author Oliveira, Tiago José Pires de
author_facet Oliveira, Tiago José Pires de
author_role author
dc.contributor.none.fl_str_mv Ataíde, Carlos Henrique
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787952H6
Duarte, Claudio Roberto
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708473P5
Béttega, Rodrigo
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4777874P8
Béttega, Vádila Giovana Guerra
dc.contributor.author.fl_str_mv Oliveira, Tiago José Pires de
dc.subject.por.fl_str_mv Fluidodinâmica
Velocidade de mínima fluidização
Biomassa
Leito fluidizado
Fluidização
Fluid dynamics
Minimum fluidization velocity
Biomass
Fluidized bed
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
topic Fluidodinâmica
Velocidade de mínima fluidização
Biomassa
Leito fluidizado
Fluidização
Fluid dynamics
Minimum fluidization velocity
Biomass
Fluidized bed
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA
description Currently seeking new forms to meet the world\'s energy needs and biomass is an alternative to supply as a source of renewable energy and cleaner. The fluidized bed reactors are widely used for the production of fuel gas, syngas and products such as methanol, bio-oil, etc. Due to its good gas-solid contact, high rates of heat and mass transfer, the beds fludizeds options has become effective for the realization of fast pyrolysis because they favor the physical and chemical processes that occur during pyrolysis. In the fast pyrolysis of biomass in bubbling fluidized bed, the sand is used to ensure homogeneity of mixing and high heat transfer coefficients. These characteristics are fundamental to the kinetics of thermal decomposition of biomass. The fluidization of mixtures of sand and biomass is characterized by particles of different shapes, sizes, densities and compositions (amount of each solid). Therefore this work was to study the fluid-dynamic behavior of the fluid and particles within the bed, and the main objective to determine the minimum fluidization velocities of binary mixtures of biomass and inert. We investigated the fluid dynamics of mixtures of particles fluidized in order to determine an initial composition which mitigates the segregation effect. The segregation is characterized by the difference of the terminal velocity of the particles that make up the mixture, a fact that may occur due to the difference of densities and particle sizes. Therefore, experiments with mixtures of biomass and inert were conducted by varying the composition of biomass and the main fluid dynamic information were measured. The materials used were the work of the stalk of tobacco dust and sand Brazilian standard normal (IPT). Regarding the parameters studied in the fluid dynamics of mixtures, the experiments allowed a better understanding of the mechanisms of segregation. Overall, in all mixtures used in the experiments we observed a concentration of inert along the bottom, whereas the biomass, less dense, concentrated mainly at the top of the annular region. As for the percentage by weight of biomass, which in the experiments were 5, 10 and 15%, it was observed that for mixtures with 15% of biomass is the formation of preferential channels, packing the bed and the presence of bubbles. The minimum fluidization velocities of these binary mixtures were obtained experimentally and the values were compared with some correlations reported in the literature.
publishDate 2012
dc.date.none.fl_str_mv 2012-02-27
2013-02-18
2016-06-22T18:41:46Z
2016-06-22T18:41:46Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv OLIVEIRA, Tiago José Pires de. Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado. 2012. 84 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2012. DOI https://doi.org/10.14393/ufu.di.2012.88
https://repositorio.ufu.br/handle/123456789/15192
https://doi.org/10.14393/ufu.di.2012.88
identifier_str_mv OLIVEIRA, Tiago José Pires de. Aspectos fluidodinâmicos de misturas binárias de resíduo de tabaco e areia em leito fluidizado. 2012. 84 f. Dissertação (Mestrado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2012. DOI https://doi.org/10.14393/ufu.di.2012.88
url https://repositorio.ufu.br/handle/123456789/15192
https://doi.org/10.14393/ufu.di.2012.88
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Uberlândia
BR
Programa de Pós-graduação em Engenharia Química
Engenharias
UFU
publisher.none.fl_str_mv Universidade Federal de Uberlândia
BR
Programa de Pós-graduação em Engenharia Química
Engenharias
UFU
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFU
instname:Universidade Federal de Uberlândia (UFU)
instacron:UFU
instname_str Universidade Federal de Uberlândia (UFU)
instacron_str UFU
institution UFU
reponame_str Repositório Institucional da UFU
collection Repositório Institucional da UFU
repository.name.fl_str_mv Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)
repository.mail.fl_str_mv diinf@dirbi.ufu.br
_version_ 1813711556509171712