Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente
Autor(a) principal: | |
---|---|
Data de Publicação: | 2019 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/31154 http://dx.doi.org/10.14393/ufu.te.2019.327 |
Resumo: | Our environment is surrounded by turbulence, and turbulent flows are often encountered in a variety of engineering applications, such as in compressors, pumps and pipelines. In most applications, friction is largely responsible for energy transformation and is considerably larger in turbulent flows than in laminar flows. Thus, reducing the drag force in turbulent flows is an issue that is constantly evolving and several techniques have been developed for this purpose. The use of microbubbles as a means of reducing friction draws attention to the reduction achieved with the technique and its environmental advantages. A better understanding of the physics that entails the reduction of microbubble drag can generate significant financial benefits in different types of transport. With this objective, numerical simulations were performed using the DNS methodology in flow with microbubbles in an ascending turbulent channel flow. For the simulations, the UNSCYFL3D code, developed in the MFlab, was used in which the Navier-Stokes equations in the incompressible formulation are solved numerically through the finite volume method in unstructured meshes. The Euler-Lagrange approach was used, where the continuous phase is treated on an Eulerian reference and the microbubbles by a Lagrangian reference, with the movement of the bubbles governed by Newton's second law, and a two-way coupling between the phases. The influence of two values for the volume fraction of the gas (0,1% e 0,5%) and three different diameters for the microbubbles (100 µm, 200 µm e 500 µm was analyzed. The addition of the microbubbles in the flow caused that for the same pressure gradient the velocity profiles of the cases with microbubbles presented an increase in relation to the profile of the single phase flow, implying in the reduction of friction. The presence of microbubbles in the flow significantly impacted the flow in the viscous sublayer. By means of Fanning's coefficient of friction it was possible to quantify the overall reduction of friction in this study for the six possible combinations of cases, and the maximum reduction achieved was around 20%. This percentage was computed for the volume fraction of 0,5% and the smaller diameter, 100 µm. The results confirm the direct influence of the volumetric fraction on the reduction of friction, besides showing that the size of the bubbles also plays a role in reducing friction, even if with less influence. |
id |
UFU_cc4147cb7b632293aec7cf03f29847f1 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/31154 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendenteNumerical study of the effects of microbubbles for reducing friction in channels with upward flowRedução de atritoFriction reductionMicrobolhasMicrobubblesEscoamento vertical ascendenteVertical ascending flowDNSAbordagem Euler-LagrangeEuler-Lagrange approachEngenharia mecânicaEscoamento bifásicoAtritoLagrange, Equações deCNPQ::ENGENHARIAS::ENGENHARIA MECANICA::FENOMENOS DE TRANSPORTE::MECANICA DOS FLUIDOSAtritoEscoamentoOur environment is surrounded by turbulence, and turbulent flows are often encountered in a variety of engineering applications, such as in compressors, pumps and pipelines. In most applications, friction is largely responsible for energy transformation and is considerably larger in turbulent flows than in laminar flows. Thus, reducing the drag force in turbulent flows is an issue that is constantly evolving and several techniques have been developed for this purpose. The use of microbubbles as a means of reducing friction draws attention to the reduction achieved with the technique and its environmental advantages. A better understanding of the physics that entails the reduction of microbubble drag can generate significant financial benefits in different types of transport. With this objective, numerical simulations were performed using the DNS methodology in flow with microbubbles in an ascending turbulent channel flow. For the simulations, the UNSCYFL3D code, developed in the MFlab, was used in which the Navier-Stokes equations in the incompressible formulation are solved numerically through the finite volume method in unstructured meshes. The Euler-Lagrange approach was used, where the continuous phase is treated on an Eulerian reference and the microbubbles by a Lagrangian reference, with the movement of the bubbles governed by Newton's second law, and a two-way coupling between the phases. The influence of two values for the volume fraction of the gas (0,1% e 0,5%) and three different diameters for the microbubbles (100 µm, 200 µm e 500 µm was analyzed. The addition of the microbubbles in the flow caused that for the same pressure gradient the velocity profiles of the cases with microbubbles presented an increase in relation to the profile of the single phase flow, implying in the reduction of friction. The presence of microbubbles in the flow significantly impacted the flow in the viscous sublayer. By means of Fanning's coefficient of friction it was possible to quantify the overall reduction of friction in this study for the six possible combinations of cases, and the maximum reduction achieved was around 20%. This percentage was computed for the volume fraction of 0,5% and the smaller diameter, 100 µm. The results confirm the direct influence of the volumetric fraction on the reduction of friction, besides showing that the size of the bubbles also plays a role in reducing friction, even if with less influence.Pesquisa sem auxílio de agências de fomentoTese (Doutorado)Nosso ambiente é cercado por turbulência, e escoamentos turbulentos são encontrados com frequência em diversas aplicações de engenharia, como em compressores, bombas e transporte de fluidos por dutos. Na maioria das aplicações o arrasto é o grande responsável pelas transformações energéticas e é consideravelmente maior nesse regime de escoamento do que em escoamentos laminares. Assim, reduzir a força de arrasto nos escoamentos turbulentos é uma questão que está em constante desenvolvimento e diversas técnicas foram desenvolvidas com este objetivo. A utilização de microbolhas como forma de diminuir o arrasto chama a atenção pela acentuada redução adquirida com a técnica, e as suas vantagens ambientais. Uma melhor compreensão da física que acarreta a redução de arrasto por microbolhas pode gerar benefícios financeiros significativos em diferentes tipos de transporte. Com este objetivo foram realizadas simulações numéricas utilizando a metodologia de DNS em escoamentos com microbolhas em um canal vertical com escoamento turbulento ascendente. Para as simulações foi utilizado o código UNSCYFL3D, desenvolvido no MFlab, no qual as equações de Navier-Stokes na formulação incompressível são resolvidas numericamente através do método de volumes finitos em malhas não-estruturadas. Foi feito o uso da abordagem euleriana-lagrangiana, onde a fase contínua é tratada sobre um referencial euleriano e as microbolhas por um referencial lagrangiano, com o movimento das bolhas regido pela segunda lei de Newton, sendo o acoplamento entre as fases do tipo duas vias. Através de um estudo sistemático foi analisada a influência de dois valores para a fração volumétrica do gás (0,1% e 0,5%) e três diâmetros diferentes para as microbolhas (100 µm, 200 µm e 500 µm). A adição das microbolhas no escoamento fez com que para o mesmo gradiente de pressão os perfis de velocidade dos casos com microbolhas apresentassem um aumento em relação ao perfil do escoamento monofásico, implicando na redução de atrito. A presença das microbolhas no escoamento impactou de maneira significativa o escoamento na subcamada viscosa. Por meio do coeficiente de atrito de Fanning foi possível quantificar globalmente a redução de atrito neste estudo para as seis combinações de casos possíveis, sendo que a máxima redução alcançada ficou em torno de 20%. Esse percentual foi computado para a fração volumétrica de 0,5% e o diâmetro menor, 100 µm. Os resultados confirmam a influência direta da fração volumétrica na redução de atrito, além de mostrar que o tamanho das bolhas também tem o seu papel na redução de atrito, mesmo que com menos influência.Universidade Federal de UberlândiaBrasilPrograma de Pós-graduação em Engenharia MecânicaSouza, Francisco José dehttp://lattes.cnpq.br/1257320066520278Silveira Neto, Aristeu dahttp://lattes.cnpq.br/4650888739121183Almeida, Odenir dehttp://lattes.cnpq.br/8197975215358295Ataíde, Carlos Henriquehttp://lattes.cnpq.br/1181660568548980Duarte, Cláudio Robertohttp://lattes.cnpq.br/8399881058983357Velasco, Lívio José2021-01-27T11:42:51Z2021-01-27T11:42:51Z2019-03-08info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfVELASCO, Lívio José. Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente. 2019. 92 f. Tese (Doutorado em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2019. DOI http://dx.doi.org/10.14393/ufu.te.2019.327https://repositorio.ufu.br/handle/123456789/31154http://dx.doi.org/10.14393/ufu.te.2019.327porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-01-28T06:16:46Zoai:repositorio.ufu.br:123456789/31154Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-01-28T06:16:46Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente Numerical study of the effects of microbubbles for reducing friction in channels with upward flow |
title |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente |
spellingShingle |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente Velasco, Lívio José Redução de atrito Friction reduction Microbolhas Microbubbles Escoamento vertical ascendente Vertical ascending flow DNS Abordagem Euler-Lagrange Euler-Lagrange approach Engenharia mecânica Escoamento bifásico Atrito Lagrange, Equações de CNPQ::ENGENHARIAS::ENGENHARIA MECANICA::FENOMENOS DE TRANSPORTE::MECANICA DOS FLUIDOS Atrito Escoamento |
title_short |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente |
title_full |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente |
title_fullStr |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente |
title_full_unstemmed |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente |
title_sort |
Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente |
author |
Velasco, Lívio José |
author_facet |
Velasco, Lívio José |
author_role |
author |
dc.contributor.none.fl_str_mv |
Souza, Francisco José de http://lattes.cnpq.br/1257320066520278 Silveira Neto, Aristeu da http://lattes.cnpq.br/4650888739121183 Almeida, Odenir de http://lattes.cnpq.br/8197975215358295 Ataíde, Carlos Henrique http://lattes.cnpq.br/1181660568548980 Duarte, Cláudio Roberto http://lattes.cnpq.br/8399881058983357 |
dc.contributor.author.fl_str_mv |
Velasco, Lívio José |
dc.subject.por.fl_str_mv |
Redução de atrito Friction reduction Microbolhas Microbubbles Escoamento vertical ascendente Vertical ascending flow DNS Abordagem Euler-Lagrange Euler-Lagrange approach Engenharia mecânica Escoamento bifásico Atrito Lagrange, Equações de CNPQ::ENGENHARIAS::ENGENHARIA MECANICA::FENOMENOS DE TRANSPORTE::MECANICA DOS FLUIDOS Atrito Escoamento |
topic |
Redução de atrito Friction reduction Microbolhas Microbubbles Escoamento vertical ascendente Vertical ascending flow DNS Abordagem Euler-Lagrange Euler-Lagrange approach Engenharia mecânica Escoamento bifásico Atrito Lagrange, Equações de CNPQ::ENGENHARIAS::ENGENHARIA MECANICA::FENOMENOS DE TRANSPORTE::MECANICA DOS FLUIDOS Atrito Escoamento |
description |
Our environment is surrounded by turbulence, and turbulent flows are often encountered in a variety of engineering applications, such as in compressors, pumps and pipelines. In most applications, friction is largely responsible for energy transformation and is considerably larger in turbulent flows than in laminar flows. Thus, reducing the drag force in turbulent flows is an issue that is constantly evolving and several techniques have been developed for this purpose. The use of microbubbles as a means of reducing friction draws attention to the reduction achieved with the technique and its environmental advantages. A better understanding of the physics that entails the reduction of microbubble drag can generate significant financial benefits in different types of transport. With this objective, numerical simulations were performed using the DNS methodology in flow with microbubbles in an ascending turbulent channel flow. For the simulations, the UNSCYFL3D code, developed in the MFlab, was used in which the Navier-Stokes equations in the incompressible formulation are solved numerically through the finite volume method in unstructured meshes. The Euler-Lagrange approach was used, where the continuous phase is treated on an Eulerian reference and the microbubbles by a Lagrangian reference, with the movement of the bubbles governed by Newton's second law, and a two-way coupling between the phases. The influence of two values for the volume fraction of the gas (0,1% e 0,5%) and three different diameters for the microbubbles (100 µm, 200 µm e 500 µm was analyzed. The addition of the microbubbles in the flow caused that for the same pressure gradient the velocity profiles of the cases with microbubbles presented an increase in relation to the profile of the single phase flow, implying in the reduction of friction. The presence of microbubbles in the flow significantly impacted the flow in the viscous sublayer. By means of Fanning's coefficient of friction it was possible to quantify the overall reduction of friction in this study for the six possible combinations of cases, and the maximum reduction achieved was around 20%. This percentage was computed for the volume fraction of 0,5% and the smaller diameter, 100 µm. The results confirm the direct influence of the volumetric fraction on the reduction of friction, besides showing that the size of the bubbles also plays a role in reducing friction, even if with less influence. |
publishDate |
2019 |
dc.date.none.fl_str_mv |
2019-03-08 2021-01-27T11:42:51Z 2021-01-27T11:42:51Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
VELASCO, Lívio José. Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente. 2019. 92 f. Tese (Doutorado em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2019. DOI http://dx.doi.org/10.14393/ufu.te.2019.327 https://repositorio.ufu.br/handle/123456789/31154 http://dx.doi.org/10.14393/ufu.te.2019.327 |
identifier_str_mv |
VELASCO, Lívio José. Estudo numérico dos efeitos de microbolhas para redução de atrito em canais com escoamento ascendente. 2019. 92 f. Tese (Doutorado em Engenharia Mecânica) - Universidade Federal de Uberlândia, Uberlândia, 2019. DOI http://dx.doi.org/10.14393/ufu.te.2019.327 |
url |
https://repositorio.ufu.br/handle/123456789/31154 http://dx.doi.org/10.14393/ufu.te.2019.327 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Mecânica |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Mecânica |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569671115571200 |