Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade
Autor(a) principal: | |
---|---|
Data de Publicação: | 2007 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/16885 |
Resumo: | Differents drafts of tooth implant insert differents levels of tension in the surrounding bones. This can results in differents prognostics for the implants installed. This work considered by photoelasticity (resilience) of the circuit transmission the gradient of tensions produced in near pre-ordered of the implants when installed in photoelasticity matrix. Eight points were considered when no burden and thirteen points when submited to the axial burden of 0,30N, testing the hypothesis that the tension is the same at the differents implants. The implants used were Titamax TI Medular, Titamax TI Cortical, Titamax Cone Morse and Alvim TI (Neodent, Curitiba, Brazil). The value of the midle cutting tension between the analysed points of each group was submited to the variant analyse showing that has a suggestive statistic difference (p<0,05) between the unburden group. In this situation the Tukey test showed where the difference was. The results outpointed that between the tested implants, the one that produced more medium tension after the installation was the Alvim TI and the axial burden incidence did not result in significative difference at the medium tension produced for all the groups. This work objective was to estimate, in photoelasticity analyse, the tension produced by differents drafts of implants after their installation and after burden incidence, testing the hypothesis that the tension is the same in the differents kinds of implants. |
id |
UFU_dd785fc1045213babbc4c7de88bda22e |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/16885 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
2016-06-22T18:47:20Z2009-08-212016-06-22T18:47:20Z2007-08-28ALMEIDA, José Afonso de. Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade. 2007. 70 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2007.https://repositorio.ufu.br/handle/123456789/16885Differents drafts of tooth implant insert differents levels of tension in the surrounding bones. This can results in differents prognostics for the implants installed. This work considered by photoelasticity (resilience) of the circuit transmission the gradient of tensions produced in near pre-ordered of the implants when installed in photoelasticity matrix. Eight points were considered when no burden and thirteen points when submited to the axial burden of 0,30N, testing the hypothesis that the tension is the same at the differents implants. The implants used were Titamax TI Medular, Titamax TI Cortical, Titamax Cone Morse and Alvim TI (Neodent, Curitiba, Brazil). The value of the midle cutting tension between the analysed points of each group was submited to the variant analyse showing that has a suggestive statistic difference (p<0,05) between the unburden group. In this situation the Tukey test showed where the difference was. The results outpointed that between the tested implants, the one that produced more medium tension after the installation was the Alvim TI and the axial burden incidence did not result in significative difference at the medium tension produced for all the groups. This work objective was to estimate, in photoelasticity analyse, the tension produced by differents drafts of implants after their installation and after burden incidence, testing the hypothesis that the tension is the same in the differents kinds of implants.Diferentes desenhos de implantes dentários introduzem diferentes níveis de tensão no osso circundante, podendo resultar diferentes prognósticos para os implantes instalados. Este trabalho avaliou por meio da fotoelasticidade de transmissão circular os gradientes de tensões gerados em pontos prédeterminados próximos aos implantes quando instalados em matrizes fotoelásticas. Foram avaliados oito pontos quando sem carga e 13 pontos quando submetidos ao carregamento axial de 0,30N, testando à hipótese de que a tensão é a mesma nos diferentes tipos de implantes. Foram utilizados os implantes Titamax TI Medular, Titamax TI Cortical, Titamax Cone Morse e Alvim TI (Neodent, Curitiba, Brasil). O valor da tensão cisalhante média entre os pontos analisados de cada grupo foi submetido à análise de variância, demonstrando que houve diferença estatisticamente significante (p<0,05) entre os grupos sem carga. Nessa situação o teste de Tukey demonstrou onde estava a diferença. Os resultados indicaram que entre os implantes testados, o que gerou maior tensão média após a instalação foi o Alvim TI e que a incidência de carga axial não resultou em diferença significativa nas tensões médias geradas para todos os grupos. O objetivo deste trabalho foi avaliar, por meio de análise fotoelástica, a tensão gerada por implantes de diferentes desenhos após sua instalação e após a aplicação de carga, testando à hipótese de que a tensão é a mesma nos diferentes tipos de implantes.Mestre em Odontologiaapplication/pdfporUniversidade Federal de UberlândiaPrograma de Pós-graduação em OdontologiaUFUBRCiências da SaúdeDistribuição de tensõesDiferentes desenhos utilizando fotoelasticidadeImplantes dentáriosFotoelasticidadeDistribution of tensionsDental implants, Using different designs photoelasticityCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIADistribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidadeinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisAraújo, Cleudmar Amaral dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782336A0Zanetta-Barbosa, Darcenyhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4797156Y8Campos, Roberto Eliashttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4774625P5Barnabé, Willianhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4736588T8Almeida, José Afonso de81759506info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFUTHUMBNAILdis.pdf.jpgdis.pdf.jpgGenerated Thumbnailimage/jpeg1397https://repositorio.ufu.br/bitstream/123456789/16885/3/dis.pdf.jpg4a42b42be8f2d03fd4996be4c81a6a98MD53ORIGINALdis.pdfapplication/pdf2136936https://repositorio.ufu.br/bitstream/123456789/16885/1/dis.pdf8f7719ff7292330dc692ffdcaf9cd8bfMD51TEXTdis.pdf.txtdis.pdf.txtExtracted texttext/plain79848https://repositorio.ufu.br/bitstream/123456789/16885/2/dis.pdf.txt31d474aaf5041414ffd5dfdeb349aa4aMD52123456789/168852021-03-19 17:23:56.195oai:repositorio.ufu.br:123456789/16885Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-03-19T20:23:56Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.por.fl_str_mv |
Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade |
title |
Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade |
spellingShingle |
Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade Almeida, José Afonso de Distribuição de tensões Diferentes desenhos utilizando fotoelasticidade Implantes dentários Fotoelasticidade Distribution of tensions Dental implants, Using different designs photoelasticity CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
title_short |
Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade |
title_full |
Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade |
title_fullStr |
Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade |
title_full_unstemmed |
Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade |
title_sort |
Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade |
author |
Almeida, José Afonso de |
author_facet |
Almeida, José Afonso de |
author_role |
author |
dc.contributor.advisor-co1.fl_str_mv |
Araújo, Cleudmar Amaral de |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782336A0 |
dc.contributor.advisor1.fl_str_mv |
Zanetta-Barbosa, Darceny |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4797156Y8 |
dc.contributor.referee1.fl_str_mv |
Campos, Roberto Elias |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4774625P5 |
dc.contributor.referee2.fl_str_mv |
Barnabé, Willian |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4736588T8 |
dc.contributor.author.fl_str_mv |
Almeida, José Afonso de |
contributor_str_mv |
Araújo, Cleudmar Amaral de Zanetta-Barbosa, Darceny Campos, Roberto Elias Barnabé, Willian |
dc.subject.por.fl_str_mv |
Distribuição de tensões Diferentes desenhos utilizando fotoelasticidade Implantes dentários Fotoelasticidade |
topic |
Distribuição de tensões Diferentes desenhos utilizando fotoelasticidade Implantes dentários Fotoelasticidade Distribution of tensions Dental implants, Using different designs photoelasticity CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
dc.subject.eng.fl_str_mv |
Distribution of tensions Dental implants, Using different designs photoelasticity |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
description |
Differents drafts of tooth implant insert differents levels of tension in the surrounding bones. This can results in differents prognostics for the implants installed. This work considered by photoelasticity (resilience) of the circuit transmission the gradient of tensions produced in near pre-ordered of the implants when installed in photoelasticity matrix. Eight points were considered when no burden and thirteen points when submited to the axial burden of 0,30N, testing the hypothesis that the tension is the same at the differents implants. The implants used were Titamax TI Medular, Titamax TI Cortical, Titamax Cone Morse and Alvim TI (Neodent, Curitiba, Brazil). The value of the midle cutting tension between the analysed points of each group was submited to the variant analyse showing that has a suggestive statistic difference (p<0,05) between the unburden group. In this situation the Tukey test showed where the difference was. The results outpointed that between the tested implants, the one that produced more medium tension after the installation was the Alvim TI and the axial burden incidence did not result in significative difference at the medium tension produced for all the groups. This work objective was to estimate, in photoelasticity analyse, the tension produced by differents drafts of implants after their installation and after burden incidence, testing the hypothesis that the tension is the same in the differents kinds of implants. |
publishDate |
2007 |
dc.date.issued.fl_str_mv |
2007-08-28 |
dc.date.available.fl_str_mv |
2009-08-21 2016-06-22T18:47:20Z |
dc.date.accessioned.fl_str_mv |
2016-06-22T18:47:20Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
ALMEIDA, José Afonso de. Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade. 2007. 70 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2007. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufu.br/handle/123456789/16885 |
identifier_str_mv |
ALMEIDA, José Afonso de. Distribuição de tensões em implantes dentários de diferentes desenhos utilizando fotoelasticidade. 2007. 70 f. Dissertação (Mestrado em Ciências da Saúde) - Universidade Federal de Uberlândia, Uberlândia, 2007. |
url |
https://repositorio.ufu.br/handle/123456789/16885 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Odontologia |
dc.publisher.initials.fl_str_mv |
UFU |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Ciências da Saúde |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
bitstream.url.fl_str_mv |
https://repositorio.ufu.br/bitstream/123456789/16885/3/dis.pdf.jpg https://repositorio.ufu.br/bitstream/123456789/16885/1/dis.pdf https://repositorio.ufu.br/bitstream/123456789/16885/2/dis.pdf.txt |
bitstream.checksum.fl_str_mv |
4a42b42be8f2d03fd4996be4c81a6a98 8f7719ff7292330dc692ffdcaf9cd8bf 31d474aaf5041414ffd5dfdeb349aa4a |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1802110353206673408 |