Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico.
Autor(a) principal: | |
---|---|
Data de Publicação: | 2019 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/28387 |
Resumo: | This work aims to study, by simulation, the behavior of SEPIC circuits in single-phase AC-DC configuration. Therefore, by understanding the operating principle of the classic SEPIC CC-DC converter, it is possible, using the same circuit element values, to analyze the different configurations of this circuit when incorporated into this conventional system: single-phase bridge rectifiers , control modes (uncontrolled and semi-controlled), plus passive elements. Therefore, the same average output voltage and same output power must be obtained for all circuits, using trial and error methods to maintain the expected values. |
id |
UFU_f6415d65ec1b4274bec41c51ecdbee5f |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/28387 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico.Simulation study of SEPIC converter topological arrangements operating in single-phase AC-DC configuration.Conversores chaveadosSwitched convertersSEPICSimulação computacionalComputational simulationCNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::ELETRONICA INDUSTRIAL, SISTEMAS E CONTROLES ELETRONICOSThis work aims to study, by simulation, the behavior of SEPIC circuits in single-phase AC-DC configuration. Therefore, by understanding the operating principle of the classic SEPIC CC-DC converter, it is possible, using the same circuit element values, to analyze the different configurations of this circuit when incorporated into this conventional system: single-phase bridge rectifiers , control modes (uncontrolled and semi-controlled), plus passive elements. Therefore, the same average output voltage and same output power must be obtained for all circuits, using trial and error methods to maintain the expected values.Trabalho de Conclusão de Curso (Graduação)Neste trabalho, tem-se o objetivo de estudar, por simulação, o comportamento dos circuitos SEPIC na configuração CA-CC monofásico. Por conseguinte, entendendo-se o princípio de operação do conversor SEPIC CC-CC clássico, é possível, utilizando os mesmos valores dos elementos do circuito, analisar as diferentes configurações deste circuito, quando incorporado a esse sistema convencional: retificadores em ponte do tipo monofásico, modos de controle (não controlado e semicontrolado), além de elementos passivos. Logo deve-se obter para todos os circuitos a mesma tensão média de saída e a mesma potência de saída, utilizando, para isto artifícios no método de tentativa e erro no objetivo de manter os valores esperados.Universidade Federal de UberlândiaBrasilEngenharia ElétricaBarbosa, Vítor Fonsecahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K8549032T4Lima, Gustavo Brito dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4217124U9Freitas, Luiz Carlos Gomes dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4770424D9Costa Neto, Antônio de Oliveirahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4972869A4Moura, Beatriz Cristina2020-01-20T12:35:58Z2020-01-20T12:35:58Z2019-12-10info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisapplication/pdfMOURA, Beatriz Cristina. Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. 2019. 80 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Elétrica) – Universidade Federal de Uberlândia, Uberlândia, 2020.https://repositorio.ufu.br/handle/123456789/28387porhttp://creativecommons.org/licenses/by-nc-nd/3.0/us/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2020-01-21T06:11:50Zoai:repositorio.ufu.br:123456789/28387Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2020-01-21T06:11:50Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. Simulation study of SEPIC converter topological arrangements operating in single-phase AC-DC configuration. |
title |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. |
spellingShingle |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. Moura, Beatriz Cristina Conversores chaveados Switched converters SEPIC Simulação computacional Computational simulation CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::ELETRONICA INDUSTRIAL, SISTEMAS E CONTROLES ELETRONICOS |
title_short |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. |
title_full |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. |
title_fullStr |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. |
title_full_unstemmed |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. |
title_sort |
Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. |
author |
Moura, Beatriz Cristina |
author_facet |
Moura, Beatriz Cristina |
author_role |
author |
dc.contributor.none.fl_str_mv |
Barbosa, Vítor Fonseca http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K8549032T4 Lima, Gustavo Brito de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4217124U9 Freitas, Luiz Carlos Gomes de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4770424D9 Costa Neto, Antônio de Oliveira http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4972869A4 |
dc.contributor.author.fl_str_mv |
Moura, Beatriz Cristina |
dc.subject.por.fl_str_mv |
Conversores chaveados Switched converters SEPIC Simulação computacional Computational simulation CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::ELETRONICA INDUSTRIAL, SISTEMAS E CONTROLES ELETRONICOS |
topic |
Conversores chaveados Switched converters SEPIC Simulação computacional Computational simulation CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::ELETRONICA INDUSTRIAL, SISTEMAS E CONTROLES ELETRONICOS |
description |
This work aims to study, by simulation, the behavior of SEPIC circuits in single-phase AC-DC configuration. Therefore, by understanding the operating principle of the classic SEPIC CC-DC converter, it is possible, using the same circuit element values, to analyze the different configurations of this circuit when incorporated into this conventional system: single-phase bridge rectifiers , control modes (uncontrolled and semi-controlled), plus passive elements. Therefore, the same average output voltage and same output power must be obtained for all circuits, using trial and error methods to maintain the expected values. |
publishDate |
2019 |
dc.date.none.fl_str_mv |
2019-12-10 2020-01-20T12:35:58Z 2020-01-20T12:35:58Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
MOURA, Beatriz Cristina. Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. 2019. 80 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Elétrica) – Universidade Federal de Uberlândia, Uberlândia, 2020. https://repositorio.ufu.br/handle/123456789/28387 |
identifier_str_mv |
MOURA, Beatriz Cristina. Estudo por simulação de arranjos topológicos do conversor SEPIC operando na configuração CA-CC monofásico. 2019. 80 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Elétrica) – Universidade Federal de Uberlândia, Uberlândia, 2020. |
url |
https://repositorio.ufu.br/handle/123456789/28387 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
http://creativecommons.org/licenses/by-nc-nd/3.0/us/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
http://creativecommons.org/licenses/by-nc-nd/3.0/us/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Engenharia Elétrica |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Engenharia Elétrica |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569669856231424 |