Experimental study of the opening angle with different rotors in a wind tunnel

Detalhes bibliográficos
Autor(a) principal: Nobre, Jean Carlos de Almeida
Data de Publicação: 2022
Outros Autores: Sousa, David Lohan Pereira de, Andrade, Luiz Claudio Fialho
Tipo de documento: Artigo
Idioma: por
Título da fonte: Revista de Engenharia Química e Química
Texto Completo: https://periodicos.ufv.br/jcec/article/view/14770
Resumo: This experiment has as main objective to verify the performance of a fan in a wind tunnel according to the opening of the air outlet valve, inserting different rotors, one with 12 blades and the other with 16 blades. The research was carried out at the Mechanical Engineering Laboratory of the Federal University of Pará, for the development of the experiment, the following steps are followed: the fan is turned on; the current intensity is measured; the head is measured between the points before and after the rotors with the U and Pitot tubes; the valve is opened at “0%” and the steps are repeated until reaching 100% opening with a distance of 20 units (mm). After carrying out these steps and collecting data such as manometric heights, dimensional data and data provided by the machine itself coupled to the Wind Tunnel. With this, the necessary calculations are carried out to find the efficiency of the fan using as main basis the Bernoulli equation where it was found: average speed, pressures, electrical power, power given to the fluid and the efficiency.
id UFV-4_2d023dd3efbaf5ada3fcf1ec02ed90cb
oai_identifier_str oai:ojs.periodicos.ufv.br:article/14770
network_acronym_str UFV-4
network_name_str Revista de Engenharia Química e Química
repository_id_str
spelling Experimental study of the opening angle with different rotors in a wind tunnelEstudo Experimental do ângulo de abertura com rotores diferentes em um túnel de ventowind tunnel. Performance of fan. Rotors.Túnel de vento. Rendimento de um ventilador. Rotores.This experiment has as main objective to verify the performance of a fan in a wind tunnel according to the opening of the air outlet valve, inserting different rotors, one with 12 blades and the other with 16 blades. The research was carried out at the Mechanical Engineering Laboratory of the Federal University of Pará, for the development of the experiment, the following steps are followed: the fan is turned on; the current intensity is measured; the head is measured between the points before and after the rotors with the U and Pitot tubes; the valve is opened at “0%” and the steps are repeated until reaching 100% opening with a distance of 20 units (mm). After carrying out these steps and collecting data such as manometric heights, dimensional data and data provided by the machine itself coupled to the Wind Tunnel. With this, the necessary calculations are carried out to find the efficiency of the fan using as main basis the Bernoulli equation where it was found: average speed, pressures, electrical power, power given to the fluid and the efficiency.Este experimento tem como objetivo principal verificar o rendimento de um ventilador em um túnel de vento conforme a abertura da válvula de saída de ar, inserindo rotores diferentes um com 12 pás e o outro com 16 pás. A pesquisa foi realizada no Laboratório de Engenharia Mecânica da Universidade Federal do Pará, para o desenvolvimento da experiência, seguem-se as seguintes etapas: liga-se o ventilador; mede-se a intensidade de corrente; mede-se a altura manométrica entre os pontos antes e depois dos rotores com os tubos em U e Pitot; abre-se a válvula em “0%” repete-se as etapas até atingir 100% de abertura com uma distância de 20 unidades (mm). Após a realização dessas etapas e a coleta de dados como alturas manométricas, dados dimensionais e dados fornecidos pela própria máquina acoplada ao Túnel de Vento. Com isso, realiza-se os devidos cálculos para encontrar o rendimento do ventilador utilizando como base principal a equação de Bernoulli onde encontrou-se: velocidade média, pressões, potência elétrica, potência cedida ao fluido e o rendimento.Universidade Federal de Viçosa - UFV2022-10-13info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.ufv.br/jcec/article/view/1477010.18540/jcecvl8iss7pp14770-01eThe Journal of Engineering and Exact Sciences; Vol. 8 No. 7 (2022); 14770-01eThe Journal of Engineering and Exact Sciences; Vol. 8 Núm. 7 (2022); 14770-01eThe Journal of Engineering and Exact Sciences; v. 8 n. 7 (2022); 14770-01e2527-1075reponame:Revista de Engenharia Química e Químicainstname:Universidade Federal de Viçosa (UFV)instacron:UFVporhttps://periodicos.ufv.br/jcec/article/view/14770/7510Copyright (c) 2022 The Journal of Engineering and Exact Scienceshttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessNobre, Jean Carlos de AlmeidaSousa, David Lohan Pereira deAndrade, Luiz Claudio Fialho2022-10-24T12:05:38Zoai:ojs.periodicos.ufv.br:article/14770Revistahttp://www.seer.ufv.br/seer/rbeq2/index.php/req2/indexONGhttps://periodicos.ufv.br/jcec/oaijcec.journal@ufv.br||req2@ufv.br2446-94162446-9416opendoar:2022-10-24T12:05:38Revista de Engenharia Química e Química - Universidade Federal de Viçosa (UFV)false
dc.title.none.fl_str_mv Experimental study of the opening angle with different rotors in a wind tunnel
Estudo Experimental do ângulo de abertura com rotores diferentes em um túnel de vento
title Experimental study of the opening angle with different rotors in a wind tunnel
spellingShingle Experimental study of the opening angle with different rotors in a wind tunnel
Nobre, Jean Carlos de Almeida
wind tunnel. Performance of fan. Rotors.
Túnel de vento. Rendimento de um ventilador. Rotores.
title_short Experimental study of the opening angle with different rotors in a wind tunnel
title_full Experimental study of the opening angle with different rotors in a wind tunnel
title_fullStr Experimental study of the opening angle with different rotors in a wind tunnel
title_full_unstemmed Experimental study of the opening angle with different rotors in a wind tunnel
title_sort Experimental study of the opening angle with different rotors in a wind tunnel
author Nobre, Jean Carlos de Almeida
author_facet Nobre, Jean Carlos de Almeida
Sousa, David Lohan Pereira de
Andrade, Luiz Claudio Fialho
author_role author
author2 Sousa, David Lohan Pereira de
Andrade, Luiz Claudio Fialho
author2_role author
author
dc.contributor.author.fl_str_mv Nobre, Jean Carlos de Almeida
Sousa, David Lohan Pereira de
Andrade, Luiz Claudio Fialho
dc.subject.por.fl_str_mv wind tunnel. Performance of fan. Rotors.
Túnel de vento. Rendimento de um ventilador. Rotores.
topic wind tunnel. Performance of fan. Rotors.
Túnel de vento. Rendimento de um ventilador. Rotores.
description This experiment has as main objective to verify the performance of a fan in a wind tunnel according to the opening of the air outlet valve, inserting different rotors, one with 12 blades and the other with 16 blades. The research was carried out at the Mechanical Engineering Laboratory of the Federal University of Pará, for the development of the experiment, the following steps are followed: the fan is turned on; the current intensity is measured; the head is measured between the points before and after the rotors with the U and Pitot tubes; the valve is opened at “0%” and the steps are repeated until reaching 100% opening with a distance of 20 units (mm). After carrying out these steps and collecting data such as manometric heights, dimensional data and data provided by the machine itself coupled to the Wind Tunnel. With this, the necessary calculations are carried out to find the efficiency of the fan using as main basis the Bernoulli equation where it was found: average speed, pressures, electrical power, power given to the fluid and the efficiency.
publishDate 2022
dc.date.none.fl_str_mv 2022-10-13
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://periodicos.ufv.br/jcec/article/view/14770
10.18540/jcecvl8iss7pp14770-01e
url https://periodicos.ufv.br/jcec/article/view/14770
identifier_str_mv 10.18540/jcecvl8iss7pp14770-01e
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://periodicos.ufv.br/jcec/article/view/14770/7510
dc.rights.driver.fl_str_mv Copyright (c) 2022 The Journal of Engineering and Exact Sciences
https://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2022 The Journal of Engineering and Exact Sciences
https://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Viçosa - UFV
publisher.none.fl_str_mv Universidade Federal de Viçosa - UFV
dc.source.none.fl_str_mv The Journal of Engineering and Exact Sciences; Vol. 8 No. 7 (2022); 14770-01e
The Journal of Engineering and Exact Sciences; Vol. 8 Núm. 7 (2022); 14770-01e
The Journal of Engineering and Exact Sciences; v. 8 n. 7 (2022); 14770-01e
2527-1075
reponame:Revista de Engenharia Química e Química
instname:Universidade Federal de Viçosa (UFV)
instacron:UFV
instname_str Universidade Federal de Viçosa (UFV)
instacron_str UFV
institution UFV
reponame_str Revista de Engenharia Química e Química
collection Revista de Engenharia Química e Química
repository.name.fl_str_mv Revista de Engenharia Química e Química - Universidade Federal de Viçosa (UFV)
repository.mail.fl_str_mv jcec.journal@ufv.br||req2@ufv.br
_version_ 1800211190697164800