Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing

Detalhes bibliográficos
Autor(a) principal: Coutinho, Felipe Dias de Abreu
Data de Publicação: 2021
Outros Autores: Carneiro, Laísa do Rosário Souza, Santos, Janaíne Conceição, Poggiali, Flávia Spitale Jacques
Tipo de documento: Artigo
Idioma: por
Título da fonte: Revista de Engenharia Química e Química
Texto Completo: https://periodicos.ufv.br/jcec/article/view/12950
Resumo: The remarkable growth of Brazilian civil construction in the early 2000s stimulated the use of industrialized construction systems, such as concrete walls. This system is characterized by high productivity and rationalization in the construction site. On the other hand, qualified workforce and specific equipment are required, which enhances the process complexity. This paper analyzed the pathological manifestations found in two different buildings in which cast-in-place concrete walls system was used. In the first moment, the causes of the anomalies were raised. Then, diagnosis and possible treatments were proposed. The following anomalies were identified: detachment of ceramic tiles from internal walls, horizontal cracks in the walls, 45° cracks in the lower parts of the walls, cracks in the corners of windows and concrete segregation. The main source of anomalies was the execution stage. Thus, a rigorous and continuous training of the workforce is necessary, followed by a continuous inspection of the services. The concreting stage must be previously planned, and the synchronous participation of the different agents is essential. In this sense, the following recommendations are made: proper dosage of concrete, guarantee the normal functioning of the pump, complete concreting of a wall before proceeding to the concreting of other elements and positioning the hose at less than 2m of height during concreting. Besides, it is also recommended the proper positioning of the reinforcements in the corners of windows and doors as well as the substrate preparation for fixing ceramic tiles, which must be done by washing it with detergent and brushing it with a steel brush. This study aims to contribute with the dissemination of practical knowledge in order to prevent and avoid pathological manifestations in future buildings.  
id UFV-4_9b34145de3899af41f05cc854aec26ca
oai_identifier_str oai:ojs.periodicos.ufv.br:article/12950
network_acronym_str UFV-4
network_name_str Revista de Engenharia Química e Química
repository_id_str
spelling Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable HousingManifestações Patológicas em Sistemas Construtivos de Paredes de Concreto – Estudo de Caso em Obras de Interesse SocialConstruction pathologiesPathological manifestationsConcrete walls systemCase studyManifestações patológicasSistema construtivoParedes de concretoEstudo de casoThe remarkable growth of Brazilian civil construction in the early 2000s stimulated the use of industrialized construction systems, such as concrete walls. This system is characterized by high productivity and rationalization in the construction site. On the other hand, qualified workforce and specific equipment are required, which enhances the process complexity. This paper analyzed the pathological manifestations found in two different buildings in which cast-in-place concrete walls system was used. In the first moment, the causes of the anomalies were raised. Then, diagnosis and possible treatments were proposed. The following anomalies were identified: detachment of ceramic tiles from internal walls, horizontal cracks in the walls, 45° cracks in the lower parts of the walls, cracks in the corners of windows and concrete segregation. The main source of anomalies was the execution stage. Thus, a rigorous and continuous training of the workforce is necessary, followed by a continuous inspection of the services. The concreting stage must be previously planned, and the synchronous participation of the different agents is essential. In this sense, the following recommendations are made: proper dosage of concrete, guarantee the normal functioning of the pump, complete concreting of a wall before proceeding to the concreting of other elements and positioning the hose at less than 2m of height during concreting. Besides, it is also recommended the proper positioning of the reinforcements in the corners of windows and doors as well as the substrate preparation for fixing ceramic tiles, which must be done by washing it with detergent and brushing it with a steel brush. This study aims to contribute with the dissemination of practical knowledge in order to prevent and avoid pathological manifestations in future buildings.  O notável crescimento da construção civil brasileira no começo dos anos 2000 impulsionou o uso de sistemas construtivos industrializados, como por exemplo, as paredes de concreto. Tal sistema permite elevada produtividade e racionalização da obra. Por outro lado, necessita de mão-de-obra qualificada e equipamentos específicos, o que torna o processo mais complexo que a construção tradicional. O presente trabalho identificou e analisou as manifestações patológicas de duas obras que utilizaram o sistema de paredes de concreto moldadas in loco. Inicialmente, foram levantadas as causas dos problemas, seguindo-se ao diagnóstico e à proposição de possíveis tratamentos. As seguintes anomalias foram identificadas: descolamento do revestimento cerâmico das paredes internas, fissuras horizontais nas paredes, fissuras a 45º na parte inferior das paredes, fissuras em cantos de janelas e segregação superficial do concreto. Verificou-se que a principal origem das anomalias se encontra na etapa de execução. Assim, destaca-se a necessidade de realização de um rigoroso treinamento da mão-de-obra, acompanhado de uma contínua fiscalização dos serviços. A etapa de concretagem deve ser previamente planejada, sendo fundamental a participação síncrona dos diferentes agentes envolvidos. É importante ater-se às seguintes recomendações: dosagem adequada do concreto usinado, garantia do bom funcionamento da bomba lança, concretagem integral de uma parede antes de prosseguir para a concretagem de outros elementos e posicionamento do mangote a uma altura inferior a 2m durante a concretagem. Destaca-se, ainda, o posicionamento adequado da armadura de reforço nos cantos das janelas e portas e a preparação do substrato para aplicação de revestimento cerâmico, a partir da lavagem com detergente e escova de aço. Este estudo visa contribuir para a disseminação de conhecimentos práticos, corroborando-se com a prevenção de anomalias em obras futuras.   Universidade Federal de Viçosa - UFV2021-09-20info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.ufv.br/jcec/article/view/1295010.18540/jcecvl7iss4pp12950-01-17eThe Journal of Engineering and Exact Sciences; Vol. 7 No. 4 (2021); 12950-01-17eThe Journal of Engineering and Exact Sciences; Vol. 7 Núm. 4 (2021); 12950-01-17eThe Journal of Engineering and Exact Sciences; v. 7 n. 4 (2021); 12950-01-17e2527-1075reponame:Revista de Engenharia Química e Químicainstname:Universidade Federal de Viçosa (UFV)instacron:UFVporhttps://periodicos.ufv.br/jcec/article/view/12950/6858Copyright (c) 2021 The Journal of Engineering and Exact Scienceshttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessCoutinho, Felipe Dias de Abreu Carneiro, Laísa do Rosário SouzaSantos, Janaíne ConceiçãoPoggiali, Flávia Spitale Jacques2021-12-16T18:51:58Zoai:ojs.periodicos.ufv.br:article/12950Revistahttp://www.seer.ufv.br/seer/rbeq2/index.php/req2/indexONGhttps://periodicos.ufv.br/jcec/oaijcec.journal@ufv.br||req2@ufv.br2446-94162446-9416opendoar:2021-12-16T18:51:58Revista de Engenharia Química e Química - Universidade Federal de Viçosa (UFV)false
dc.title.none.fl_str_mv Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing
Manifestações Patológicas em Sistemas Construtivos de Paredes de Concreto – Estudo de Caso em Obras de Interesse Social
title Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing
spellingShingle Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing
Coutinho, Felipe Dias de Abreu
Construction pathologies
Pathological manifestations
Concrete walls system
Case study
Manifestações patológicas
Sistema construtivo
Paredes de concreto
Estudo de caso
title_short Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing
title_full Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing
title_fullStr Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing
title_full_unstemmed Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing
title_sort Pathological Manifestations in cast-in-place Concrete Walls Systems – Case study in Affordable Housing
author Coutinho, Felipe Dias de Abreu
author_facet Coutinho, Felipe Dias de Abreu
Carneiro, Laísa do Rosário Souza
Santos, Janaíne Conceição
Poggiali, Flávia Spitale Jacques
author_role author
author2 Carneiro, Laísa do Rosário Souza
Santos, Janaíne Conceição
Poggiali, Flávia Spitale Jacques
author2_role author
author
author
dc.contributor.author.fl_str_mv Coutinho, Felipe Dias de Abreu
Carneiro, Laísa do Rosário Souza
Santos, Janaíne Conceição
Poggiali, Flávia Spitale Jacques
dc.subject.por.fl_str_mv Construction pathologies
Pathological manifestations
Concrete walls system
Case study
Manifestações patológicas
Sistema construtivo
Paredes de concreto
Estudo de caso
topic Construction pathologies
Pathological manifestations
Concrete walls system
Case study
Manifestações patológicas
Sistema construtivo
Paredes de concreto
Estudo de caso
description The remarkable growth of Brazilian civil construction in the early 2000s stimulated the use of industrialized construction systems, such as concrete walls. This system is characterized by high productivity and rationalization in the construction site. On the other hand, qualified workforce and specific equipment are required, which enhances the process complexity. This paper analyzed the pathological manifestations found in two different buildings in which cast-in-place concrete walls system was used. In the first moment, the causes of the anomalies were raised. Then, diagnosis and possible treatments were proposed. The following anomalies were identified: detachment of ceramic tiles from internal walls, horizontal cracks in the walls, 45° cracks in the lower parts of the walls, cracks in the corners of windows and concrete segregation. The main source of anomalies was the execution stage. Thus, a rigorous and continuous training of the workforce is necessary, followed by a continuous inspection of the services. The concreting stage must be previously planned, and the synchronous participation of the different agents is essential. In this sense, the following recommendations are made: proper dosage of concrete, guarantee the normal functioning of the pump, complete concreting of a wall before proceeding to the concreting of other elements and positioning the hose at less than 2m of height during concreting. Besides, it is also recommended the proper positioning of the reinforcements in the corners of windows and doors as well as the substrate preparation for fixing ceramic tiles, which must be done by washing it with detergent and brushing it with a steel brush. This study aims to contribute with the dissemination of practical knowledge in order to prevent and avoid pathological manifestations in future buildings.  
publishDate 2021
dc.date.none.fl_str_mv 2021-09-20
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://periodicos.ufv.br/jcec/article/view/12950
10.18540/jcecvl7iss4pp12950-01-17e
url https://periodicos.ufv.br/jcec/article/view/12950
identifier_str_mv 10.18540/jcecvl7iss4pp12950-01-17e
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://periodicos.ufv.br/jcec/article/view/12950/6858
dc.rights.driver.fl_str_mv Copyright (c) 2021 The Journal of Engineering and Exact Sciences
https://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2021 The Journal of Engineering and Exact Sciences
https://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Viçosa - UFV
publisher.none.fl_str_mv Universidade Federal de Viçosa - UFV
dc.source.none.fl_str_mv The Journal of Engineering and Exact Sciences; Vol. 7 No. 4 (2021); 12950-01-17e
The Journal of Engineering and Exact Sciences; Vol. 7 Núm. 4 (2021); 12950-01-17e
The Journal of Engineering and Exact Sciences; v. 7 n. 4 (2021); 12950-01-17e
2527-1075
reponame:Revista de Engenharia Química e Química
instname:Universidade Federal de Viçosa (UFV)
instacron:UFV
instname_str Universidade Federal de Viçosa (UFV)
instacron_str UFV
institution UFV
reponame_str Revista de Engenharia Química e Química
collection Revista de Engenharia Química e Química
repository.name.fl_str_mv Revista de Engenharia Química e Química - Universidade Federal de Viçosa (UFV)
repository.mail.fl_str_mv jcec.journal@ufv.br||req2@ufv.br
_version_ 1800211190084796416