Study of surface topography in milling of 6351 T6 aluminum alloy
Autor(a) principal: | |
---|---|
Data de Publicação: | 2022 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Revista de Engenharia Química e Química |
Texto Completo: | https://periodicos.ufv.br/jcec/article/view/14027 |
Resumo: | In milling the surface texture is generated by the superposition of curved surfaces resulting from the passage of an edge is removed by the subsequent which in turn makes a waviness. The phase difference between the waves is used as indicative of the presence of vibrations that mainly result in a poor surface finish. Topography parameters (roughness and waviness) represent a relative measure of the process stability. This study’s objective is to describe the surface topography, from systematic trials in milling of aluminum alloy 6351T6 with solid carbide end mills different only with respect to surface finish. The results were based on acquired vertical roughness parameters (Ra, Rq, Rz, and Rt) to different cutting conditions. |
id |
UFV-4_f7fc9390a22cdd90ad80fb3132217dfd |
---|---|
oai_identifier_str |
oai:ojs.periodicos.ufv.br:article/14027 |
network_acronym_str |
UFV-4 |
network_name_str |
Revista de Engenharia Química e Química |
repository_id_str |
|
spelling |
Study of surface topography in milling of 6351 T6 aluminum alloyEstudo da topografia superficial no fresamento da liga de alumínio 6351 T6Topography surface; Post-coat treatment; Milling of aluminum alloy.Topografia superficial, Acabamento pós- processual, Fresamento de liga de alumínio.In milling the surface texture is generated by the superposition of curved surfaces resulting from the passage of an edge is removed by the subsequent which in turn makes a waviness. The phase difference between the waves is used as indicative of the presence of vibrations that mainly result in a poor surface finish. Topography parameters (roughness and waviness) represent a relative measure of the process stability. This study’s objective is to describe the surface topography, from systematic trials in milling of aluminum alloy 6351T6 with solid carbide end mills different only with respect to surface finish. The results were based on acquired vertical roughness parameters (Ra, Rq, Rz, and Rt) to different cutting conditions.No fresamento a textura superficial é gerada pela superposição de superfícies onduladas resultantes da passagem de um gume é removida pelo subseqüente que também deixa uma ondulação. A diferença de fase entre as ondulações é empregada como indicativo da presença de vibrações que resultam principalmente num pior acabamento superficial. Os desvios geométricos superficiais (rugosidade e ondulação) representam uma medida relativa da estabilidade do processo. O objetivo deste trabalho é descrever a topografia superficial, a partir de ensaios sistemáticos de fresamento de topo da liga de alumínio 6351 T6 com emprego de fresas de topo metal duro integrais. Os resultados são apresentados com base nos parâmetros verticais de rugosidade (Ra, Rq, Rz e Rt), curtose e profundidade de ondulação para condições de velocidades de corte e avanços variados.Universidade Federal de Viçosa - UFV2022-03-18info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.ufv.br/jcec/article/view/1402710.18540/jcecvl8iss3pp14027-01eThe Journal of Engineering and Exact Sciences; Vol. 8 No. 3 (2022); 14027-01eThe Journal of Engineering and Exact Sciences; Vol. 8 Núm. 3 (2022); 14027-01eThe Journal of Engineering and Exact Sciences; v. 8 n. 3 (2022); 14027-01e2527-1075reponame:Revista de Engenharia Química e Químicainstname:Universidade Federal de Viçosa (UFV)instacron:UFVporhttps://periodicos.ufv.br/jcec/article/view/14027/7229Copyright (c) 2022 The Journal of Engineering and Exact Scienceshttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessLucas, Eliene OliveiraMundin, Rafael BorgesCosta, Eder SilvaSiqueira, Antonio Marcos de Oliveira 2022-06-29T13:37:54Zoai:ojs.periodicos.ufv.br:article/14027Revistahttp://www.seer.ufv.br/seer/rbeq2/index.php/req2/indexONGhttps://periodicos.ufv.br/jcec/oaijcec.journal@ufv.br||req2@ufv.br2446-94162446-9416opendoar:2022-06-29T13:37:54Revista de Engenharia Química e Química - Universidade Federal de Viçosa (UFV)false |
dc.title.none.fl_str_mv |
Study of surface topography in milling of 6351 T6 aluminum alloy Estudo da topografia superficial no fresamento da liga de alumínio 6351 T6 |
title |
Study of surface topography in milling of 6351 T6 aluminum alloy |
spellingShingle |
Study of surface topography in milling of 6351 T6 aluminum alloy Lucas, Eliene Oliveira Topography surface; Post-coat treatment; Milling of aluminum alloy. Topografia superficial, Acabamento pós- processual, Fresamento de liga de alumínio. |
title_short |
Study of surface topography in milling of 6351 T6 aluminum alloy |
title_full |
Study of surface topography in milling of 6351 T6 aluminum alloy |
title_fullStr |
Study of surface topography in milling of 6351 T6 aluminum alloy |
title_full_unstemmed |
Study of surface topography in milling of 6351 T6 aluminum alloy |
title_sort |
Study of surface topography in milling of 6351 T6 aluminum alloy |
author |
Lucas, Eliene Oliveira |
author_facet |
Lucas, Eliene Oliveira Mundin, Rafael Borges Costa, Eder Silva Siqueira, Antonio Marcos de Oliveira |
author_role |
author |
author2 |
Mundin, Rafael Borges Costa, Eder Silva Siqueira, Antonio Marcos de Oliveira |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
Lucas, Eliene Oliveira Mundin, Rafael Borges Costa, Eder Silva Siqueira, Antonio Marcos de Oliveira |
dc.subject.por.fl_str_mv |
Topography surface; Post-coat treatment; Milling of aluminum alloy. Topografia superficial, Acabamento pós- processual, Fresamento de liga de alumínio. |
topic |
Topography surface; Post-coat treatment; Milling of aluminum alloy. Topografia superficial, Acabamento pós- processual, Fresamento de liga de alumínio. |
description |
In milling the surface texture is generated by the superposition of curved surfaces resulting from the passage of an edge is removed by the subsequent which in turn makes a waviness. The phase difference between the waves is used as indicative of the presence of vibrations that mainly result in a poor surface finish. Topography parameters (roughness and waviness) represent a relative measure of the process stability. This study’s objective is to describe the surface topography, from systematic trials in milling of aluminum alloy 6351T6 with solid carbide end mills different only with respect to surface finish. The results were based on acquired vertical roughness parameters (Ra, Rq, Rz, and Rt) to different cutting conditions. |
publishDate |
2022 |
dc.date.none.fl_str_mv |
2022-03-18 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://periodicos.ufv.br/jcec/article/view/14027 10.18540/jcecvl8iss3pp14027-01e |
url |
https://periodicos.ufv.br/jcec/article/view/14027 |
identifier_str_mv |
10.18540/jcecvl8iss3pp14027-01e |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://periodicos.ufv.br/jcec/article/view/14027/7229 |
dc.rights.driver.fl_str_mv |
Copyright (c) 2022 The Journal of Engineering and Exact Sciences https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Copyright (c) 2022 The Journal of Engineering and Exact Sciences https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Viçosa - UFV |
publisher.none.fl_str_mv |
Universidade Federal de Viçosa - UFV |
dc.source.none.fl_str_mv |
The Journal of Engineering and Exact Sciences; Vol. 8 No. 3 (2022); 14027-01e The Journal of Engineering and Exact Sciences; Vol. 8 Núm. 3 (2022); 14027-01e The Journal of Engineering and Exact Sciences; v. 8 n. 3 (2022); 14027-01e 2527-1075 reponame:Revista de Engenharia Química e Química instname:Universidade Federal de Viçosa (UFV) instacron:UFV |
instname_str |
Universidade Federal de Viçosa (UFV) |
instacron_str |
UFV |
institution |
UFV |
reponame_str |
Revista de Engenharia Química e Química |
collection |
Revista de Engenharia Química e Química |
repository.name.fl_str_mv |
Revista de Engenharia Química e Química - Universidade Federal de Viçosa (UFV) |
repository.mail.fl_str_mv |
jcec.journal@ufv.br||req2@ufv.br |
_version_ |
1800211190178119680 |