TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT

Detalhes bibliográficos
Autor(a) principal: Morandim-Giannetti, Andreia Araújo
Data de Publicação: 2017
Outros Autores: Eliodorio, Kevy Pontes, Andolfatto, Vitor Seorra, Martins, Marco Rulevas, de Sá, Breno Pivaro, Umeki, Erick
Tipo de documento: Artigo
Idioma: por
Título da fonte: The Journal of Engineering and Exact Sciences
Texto Completo: https://periodicos.ufv.br/jcec/article/view/2446941603022017267
Resumo: Initially, we performed the synthesis and characterization of sec-butylammonium acetate IL and chitosan activation with it. Afterwards, we used the activated chitosan to carry out the adsorption of chromium VI, which is the main metallic ion present in tannery effluents. The influence of the adsorbent storage time, adsorbent amount, test time, pH and temperature were analyzed. The storage time indicated low influence on the treatment and on the quality of the adsorbent; however, drying after the impregnation process gave the material greater adsorption capacity. The adsorption time was 1 hour, the ideal amount of 1.00 g and the temperature 25 ° C. Regarding pH, no significant changes were observed in the amount adsorbed between 2 and 4.5. These previously determined conditions were used for the treatment of the tannery effluent, verifying the efficiency of chromium VI concentration reduction.
id UFV-6_d8cb0e7d43361da89b62b52653806c22
oai_identifier_str oai:ojs.periodicos.ufv.br:article/2319
network_acronym_str UFV-6
network_name_str The Journal of Engineering and Exact Sciences
repository_id_str
spelling TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENTTRATAMENTO DE EFLUENTES DE CURTUME A PARTIR DA ADSORÇÃO EM QUITOSANA SUBMETIDA A TRATAMENTO COM LÍQUIDO IÔNICOTannery effluentHexavalent chromiumIonic liquidActivated chitosanefluente de curtumecromo hexavalentelíquido iônicoquitosana ativadInitially, we performed the synthesis and characterization of sec-butylammonium acetate IL and chitosan activation with it. Afterwards, we used the activated chitosan to carry out the adsorption of chromium VI, which is the main metallic ion present in tannery effluents. The influence of the adsorbent storage time, adsorbent amount, test time, pH and temperature were analyzed. The storage time indicated low influence on the treatment and on the quality of the adsorbent; however, drying after the impregnation process gave the material greater adsorption capacity. The adsorption time was 1 hour, the ideal amount of 1.00 g and the temperature 25 ° C. Regarding pH, no significant changes were observed in the amount adsorbed between 2 and 4.5. These previously determined conditions were used for the treatment of the tannery effluent, verifying the efficiency of chromium VI concentration reduction.Inicialmente, foi realizada a síntese e caracterização do LI acetato de sec-butilamônio e ativação da quitosana com o mesmo. Posteriormente, foram realizadas as adsorções de cromo VI, principal íon metálico presente em efluentes de curtume, utilizando-se a quitosana ativada, sendo determinados a influência do tempo de estocagem do adsorvente, da quantidade de adsorvente utilizado, do tempo de ensaio, do pH e da temperatura ideais. O tempo de estocagem indicou baixa influência no tratamento e na qualidade do adsorvente, porém, a secagem após o processo de impregnação conferiu ao material maior capacidade de adsorção. O tempo de adsorção foi de 1 hora, a quantidade ideal de 1,00 g e a temperatura de 25ºC. Com relação ao pH, não foram verificadas alterações significantes na quantidade adsorvida entre 2 a 4,5. Essas condições previamente determinadas foram utilizadas para a realização do tratamento do efluente de curtume, sendo verificada a eficiência da redução do teor do mesmo.Universidade Federal de Viçosa - UFV2017-03-19info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.ufv.br/jcec/article/view/244694160302201726710.18540/jcecvl3iss2pp267-280The Journal of Engineering and Exact Sciences; Vol. 3 No. 2 (2017); 267-280The Journal of Engineering and Exact Sciences; Vol. 3 Núm. 2 (2017); 267-280The Journal of Engineering and Exact Sciences; v. 3 n. 2 (2017); 267-2802527-1075reponame:The Journal of Engineering and Exact Sciencesinstname:Universidade Federal de Viçosa (UFV)instacron:UFVporhttps://periodicos.ufv.br/jcec/article/view/2446941603022017267/pdfMorandim-Giannetti, Andreia AraújoEliodorio, Kevy PontesAndolfatto, Vitor SeorraMartins, Marco Rulevasde Sá, Breno PivaroUmeki, Erickinfo:eu-repo/semantics/openAccess2020-07-14T22:33:31Zoai:ojs.periodicos.ufv.br:article/2319Revistahttp://www.seer.ufv.br/seer/rbeq2/index.php/req2/oai2527-10752527-1075opendoar:2020-07-14T22:33:31The Journal of Engineering and Exact Sciences - Universidade Federal de Viçosa (UFV)false
dc.title.none.fl_str_mv TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT
TRATAMENTO DE EFLUENTES DE CURTUME A PARTIR DA ADSORÇÃO EM QUITOSANA SUBMETIDA A TRATAMENTO COM LÍQUIDO IÔNICO
title TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT
spellingShingle TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT
Morandim-Giannetti, Andreia Araújo
Tannery effluent
Hexavalent chromium
Ionic liquid
Activated chitosan
efluente de curtume
cromo hexavalente
líquido iônico
quitosana ativad
title_short TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT
title_full TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT
title_fullStr TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT
title_full_unstemmed TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT
title_sort TREATMENT OF TANNERY EFFLUENTS FROM ADSORTION IN CHITOSAN SUBMITTED TO IONIC LIQUID TREATMENT
author Morandim-Giannetti, Andreia Araújo
author_facet Morandim-Giannetti, Andreia Araújo
Eliodorio, Kevy Pontes
Andolfatto, Vitor Seorra
Martins, Marco Rulevas
de Sá, Breno Pivaro
Umeki, Erick
author_role author
author2 Eliodorio, Kevy Pontes
Andolfatto, Vitor Seorra
Martins, Marco Rulevas
de Sá, Breno Pivaro
Umeki, Erick
author2_role author
author
author
author
author
dc.contributor.author.fl_str_mv Morandim-Giannetti, Andreia Araújo
Eliodorio, Kevy Pontes
Andolfatto, Vitor Seorra
Martins, Marco Rulevas
de Sá, Breno Pivaro
Umeki, Erick
dc.subject.por.fl_str_mv Tannery effluent
Hexavalent chromium
Ionic liquid
Activated chitosan
efluente de curtume
cromo hexavalente
líquido iônico
quitosana ativad
topic Tannery effluent
Hexavalent chromium
Ionic liquid
Activated chitosan
efluente de curtume
cromo hexavalente
líquido iônico
quitosana ativad
description Initially, we performed the synthesis and characterization of sec-butylammonium acetate IL and chitosan activation with it. Afterwards, we used the activated chitosan to carry out the adsorption of chromium VI, which is the main metallic ion present in tannery effluents. The influence of the adsorbent storage time, adsorbent amount, test time, pH and temperature were analyzed. The storage time indicated low influence on the treatment and on the quality of the adsorbent; however, drying after the impregnation process gave the material greater adsorption capacity. The adsorption time was 1 hour, the ideal amount of 1.00 g and the temperature 25 ° C. Regarding pH, no significant changes were observed in the amount adsorbed between 2 and 4.5. These previously determined conditions were used for the treatment of the tannery effluent, verifying the efficiency of chromium VI concentration reduction.
publishDate 2017
dc.date.none.fl_str_mv 2017-03-19
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://periodicos.ufv.br/jcec/article/view/2446941603022017267
10.18540/jcecvl3iss2pp267-280
url https://periodicos.ufv.br/jcec/article/view/2446941603022017267
identifier_str_mv 10.18540/jcecvl3iss2pp267-280
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://periodicos.ufv.br/jcec/article/view/2446941603022017267/pdf
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Viçosa - UFV
publisher.none.fl_str_mv Universidade Federal de Viçosa - UFV
dc.source.none.fl_str_mv The Journal of Engineering and Exact Sciences; Vol. 3 No. 2 (2017); 267-280
The Journal of Engineering and Exact Sciences; Vol. 3 Núm. 2 (2017); 267-280
The Journal of Engineering and Exact Sciences; v. 3 n. 2 (2017); 267-280
2527-1075
reponame:The Journal of Engineering and Exact Sciences
instname:Universidade Federal de Viçosa (UFV)
instacron:UFV
instname_str Universidade Federal de Viçosa (UFV)
instacron_str UFV
institution UFV
reponame_str The Journal of Engineering and Exact Sciences
collection The Journal of Engineering and Exact Sciences
repository.name.fl_str_mv The Journal of Engineering and Exact Sciences - Universidade Federal de Viçosa (UFV)
repository.mail.fl_str_mv
_version_ 1808845243432304640