Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | LOCUS Repositório Institucional da UFV |
Texto Completo: | http://locus.ufv.br/handle/123456789/3031 |
Resumo: | The purpose of this study was to evaluate the quality of Eucalyptus benthamii wood for kraft pulp production. Probably the most planted Eucalyptus clone in Brazil, a hybrid of Eucalyptus urophylla x Eucalyptus grandis, was also analyzed for comparison purposes. The wood characteristics analyzed were the basic density and chemical composition. Laboratory pulping was carried out to obtain pulps with kappa number 17 and their effectiveresidual alkali, screen yield and viscosity of pulp. The pulps were bleached by OD(EP)DP sequence to reach 90±1%ISO. The bleached pulps were refined and theiroptical and physica-mechanical properties were determined. The Eucalyptus benthamii wood presented an anatomical structure, basic density and fiber dimensions quite similar to those of other eucalypts species planted by the Brazilian pulp industry. However, it presented poorer wood quality characteristics when compared to the hybrid urograndis species, with higher amounts of extractives and lignin, lower amount of glucans, more galactans and lower S/G ratio, characteristics favoring lower pulping yield. During oxygen delignification Eucalyptus benthamii pulp resulted in higher brightness gain and higher kappa number decrease, but lower selectivity. The viscosity difference between the initial brown pulp and oxygen delignified pulp was reduced after bleaching. The Eucalyptus benthamii wood proved to be less attractive for kraft pulp production because presented lower screened yield, lower viscosity and requiring greater alkali charge for cooking. However, after bleaching and refining the disadvantages were minimized, since the bleached pulps behaved very similar, including physical and mechanical properties. |
id |
UFV_831888d75bfcdf055dd1f74f2853de2f |
---|---|
oai_identifier_str |
oai:locus.ufv.br:123456789/3031 |
network_acronym_str |
UFV |
network_name_str |
LOCUS Repositório Institucional da UFV |
repository_id_str |
2145 |
spelling |
Alves, Isabel Cristina Nogueirahttp://lattes.cnpq.br/0076711882049485Colodette, Jorge Luizhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721443U9Oliveira, Rubens Chaves dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781313H5Gomide, José Líviohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781177P5Mokfienski, Alfredohttp://lattes.cnpq.br/4832566503063120Carvalho, Ana Márcia Macedo Ladeirahttp://lattes.cnpq.br/60173926589932882015-03-26T13:15:05Z2011-08-092015-03-26T13:15:05Z2010-02-22ALVES, Isabel Cristina Nogueira. Potential of Eucalyptus benthamii Maiden et Cambage wood for kraft pulp production. 2010. 76 f. Dissertação (Mestrado em Manejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização de) - Universidade Federal de Viçosa, Viçosa, 2010.http://locus.ufv.br/handle/123456789/3031The purpose of this study was to evaluate the quality of Eucalyptus benthamii wood for kraft pulp production. Probably the most planted Eucalyptus clone in Brazil, a hybrid of Eucalyptus urophylla x Eucalyptus grandis, was also analyzed for comparison purposes. The wood characteristics analyzed were the basic density and chemical composition. Laboratory pulping was carried out to obtain pulps with kappa number 17 and their effectiveresidual alkali, screen yield and viscosity of pulp. The pulps were bleached by OD(EP)DP sequence to reach 90±1%ISO. The bleached pulps were refined and theiroptical and physica-mechanical properties were determined. The Eucalyptus benthamii wood presented an anatomical structure, basic density and fiber dimensions quite similar to those of other eucalypts species planted by the Brazilian pulp industry. However, it presented poorer wood quality characteristics when compared to the hybrid urograndis species, with higher amounts of extractives and lignin, lower amount of glucans, more galactans and lower S/G ratio, characteristics favoring lower pulping yield. During oxygen delignification Eucalyptus benthamii pulp resulted in higher brightness gain and higher kappa number decrease, but lower selectivity. The viscosity difference between the initial brown pulp and oxygen delignified pulp was reduced after bleaching. The Eucalyptus benthamii wood proved to be less attractive for kraft pulp production because presented lower screened yield, lower viscosity and requiring greater alkali charge for cooking. However, after bleaching and refining the disadvantages were minimized, since the bleached pulps behaved very similar, including physical and mechanical properties.O objetivo deste trabalho foi avaliar a qualidade tecnológica da madeira de Eucalyptus benthamii para produção de celulose kraft. Suas características foram comparadas com as de um híbrido de Eucalyptus grandis x Eucalyptus urophylla que é, provavelmente, o clone mais plantado no Brasil e, portanto, de grande importância no setor nacional de celulose e papel. As características avaliadas na madeira foram a densidade básica, composição anatômica, dimensões das fibras e composição química. Foram realizados cozimentos em escala laboratorial onde se avaliou o teor de álcali efetivo no licor residual, o rendimento depurado e a viscosidade da polpa celulósica. As polpas foram branqueadas pela seqüência OD(EP)DP, a uma alvura final de 90±1% ISO, sendo, depois, refinadas e testadas suas propriedades físico-mecânicos e ópticas. A madeira do Eucalyptus benthamii apresentou estrutura anatômica bastante semelhante às outras espécies do gênero e, ainda, densidade básica e dimensões das fibras dentro dos parâmetros dos clones de Eucalyptus utilizados atualmente pela indústria nacional de celulose e papel. Do ponto de vista de constituição química, o Eucalyptus benthamii demonstrou possuir qualidade tecnológica inferior à do híbrido urograndis, pois apresentou maiores teores de extrativos e de lignina, menor teor de glucanas, maior teor de galactanas e menor relação S/G, características que possivelmente contribuíram para o menor rendimento em polpa apresentado pela espécie. Durante a deslignificação com oxigênio a polpa do Eucalyptus benthamii obteve maior ganho de alvura e maior queda do número kappa, entretanto apresentou menor seletividade. A diferença entre as viscosidades iniciais das polpas marrom e pré-O foi reduzida após o branqueamento. A madeira do Eucalyptus benthamii demonstrou ser menos atraente para a produção de celulose, pois proporcionou menor rendimento depurado, menor viscosidade e requerendo maior carga de álcali no cozimento. Entretanto, após branqueamento e o refino as desvantagens foram minimizadas, uma vez que as polpas apresentaram comportamentos bem semelhantes, inclusive para as propriedades físico-mecânicas das polpas.Fundação de Amparo a Pesquisa do Estado de Minas Geraisapplication/pdfporUniversidade Federal de ViçosaMestrado em Ciência FlorestalUFVBRManejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização deEucalyptus benthamiiCeluloseMadeiraKraftEucalyptus benthamiiCelluloseWoodKraftCNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::TECNOLOGIA E UTILIZACAO DE PRODUTOS FLORESTAISPotencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose KraftPotential of Eucalyptus benthamii Maiden et Cambage wood for kraft pulp productioninfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:LOCUS Repositório Institucional da UFVinstname:Universidade Federal de Viçosa (UFV)instacron:UFVORIGINALtexto completo.pdfapplication/pdf857280https://locus.ufv.br//bitstream/123456789/3031/1/texto%20completo.pdfb5a7c3d4434414669ccdc700eb88fae2MD51TEXTtexto completo.pdf.txttexto completo.pdf.txtExtracted texttext/plain116790https://locus.ufv.br//bitstream/123456789/3031/2/texto%20completo.pdf.txtc1b0776863bd58fc1b13781ad48d9b27MD52THUMBNAILtexto completo.pdf.jpgtexto completo.pdf.jpgIM Thumbnailimage/jpeg3668https://locus.ufv.br//bitstream/123456789/3031/3/texto%20completo.pdf.jpg7fc98868cb0db3dc14593d17f1e30e0dMD53123456789/30312016-04-09 23:02:53.612oai:locus.ufv.br:123456789/3031Repositório InstitucionalPUBhttps://www.locus.ufv.br/oai/requestfabiojreis@ufv.bropendoar:21452016-04-10T02:02:53LOCUS Repositório Institucional da UFV - Universidade Federal de Viçosa (UFV)false |
dc.title.por.fl_str_mv |
Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft |
dc.title.alternative.eng.fl_str_mv |
Potential of Eucalyptus benthamii Maiden et Cambage wood for kraft pulp production |
title |
Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft |
spellingShingle |
Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft Alves, Isabel Cristina Nogueira Eucalyptus benthamii Celulose Madeira Kraft Eucalyptus benthamii Cellulose Wood Kraft CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::TECNOLOGIA E UTILIZACAO DE PRODUTOS FLORESTAIS |
title_short |
Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft |
title_full |
Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft |
title_fullStr |
Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft |
title_full_unstemmed |
Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft |
title_sort |
Potencial da madeira Eucalyptus benthamii Maiden et Cambage visando à produção de celulose Kraft |
author |
Alves, Isabel Cristina Nogueira |
author_facet |
Alves, Isabel Cristina Nogueira |
author_role |
author |
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/0076711882049485 |
dc.contributor.author.fl_str_mv |
Alves, Isabel Cristina Nogueira |
dc.contributor.advisor-co1.fl_str_mv |
Colodette, Jorge Luiz |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721443U9 |
dc.contributor.advisor-co2.fl_str_mv |
Oliveira, Rubens Chaves de |
dc.contributor.advisor-co2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781313H5 |
dc.contributor.advisor1.fl_str_mv |
Gomide, José Lívio |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4781177P5 |
dc.contributor.referee1.fl_str_mv |
Mokfienski, Alfredo |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/4832566503063120 |
dc.contributor.referee2.fl_str_mv |
Carvalho, Ana Márcia Macedo Ladeira |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/6017392658993288 |
contributor_str_mv |
Colodette, Jorge Luiz Oliveira, Rubens Chaves de Gomide, José Lívio Mokfienski, Alfredo Carvalho, Ana Márcia Macedo Ladeira |
dc.subject.por.fl_str_mv |
Eucalyptus benthamii Celulose Madeira Kraft |
topic |
Eucalyptus benthamii Celulose Madeira Kraft Eucalyptus benthamii Cellulose Wood Kraft CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::TECNOLOGIA E UTILIZACAO DE PRODUTOS FLORESTAIS |
dc.subject.eng.fl_str_mv |
Eucalyptus benthamii Cellulose Wood Kraft |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::TECNOLOGIA E UTILIZACAO DE PRODUTOS FLORESTAIS |
description |
The purpose of this study was to evaluate the quality of Eucalyptus benthamii wood for kraft pulp production. Probably the most planted Eucalyptus clone in Brazil, a hybrid of Eucalyptus urophylla x Eucalyptus grandis, was also analyzed for comparison purposes. The wood characteristics analyzed were the basic density and chemical composition. Laboratory pulping was carried out to obtain pulps with kappa number 17 and their effectiveresidual alkali, screen yield and viscosity of pulp. The pulps were bleached by OD(EP)DP sequence to reach 90±1%ISO. The bleached pulps were refined and theiroptical and physica-mechanical properties were determined. The Eucalyptus benthamii wood presented an anatomical structure, basic density and fiber dimensions quite similar to those of other eucalypts species planted by the Brazilian pulp industry. However, it presented poorer wood quality characteristics when compared to the hybrid urograndis species, with higher amounts of extractives and lignin, lower amount of glucans, more galactans and lower S/G ratio, characteristics favoring lower pulping yield. During oxygen delignification Eucalyptus benthamii pulp resulted in higher brightness gain and higher kappa number decrease, but lower selectivity. The viscosity difference between the initial brown pulp and oxygen delignified pulp was reduced after bleaching. The Eucalyptus benthamii wood proved to be less attractive for kraft pulp production because presented lower screened yield, lower viscosity and requiring greater alkali charge for cooking. However, after bleaching and refining the disadvantages were minimized, since the bleached pulps behaved very similar, including physical and mechanical properties. |
publishDate |
2010 |
dc.date.issued.fl_str_mv |
2010-02-22 |
dc.date.available.fl_str_mv |
2011-08-09 2015-03-26T13:15:05Z |
dc.date.accessioned.fl_str_mv |
2015-03-26T13:15:05Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
ALVES, Isabel Cristina Nogueira. Potential of Eucalyptus benthamii Maiden et Cambage wood for kraft pulp production. 2010. 76 f. Dissertação (Mestrado em Manejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização de) - Universidade Federal de Viçosa, Viçosa, 2010. |
dc.identifier.uri.fl_str_mv |
http://locus.ufv.br/handle/123456789/3031 |
identifier_str_mv |
ALVES, Isabel Cristina Nogueira. Potential of Eucalyptus benthamii Maiden et Cambage wood for kraft pulp production. 2010. 76 f. Dissertação (Mestrado em Manejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização de) - Universidade Federal de Viçosa, Viçosa, 2010. |
url |
http://locus.ufv.br/handle/123456789/3031 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Viçosa |
dc.publisher.program.fl_str_mv |
Mestrado em Ciência Florestal |
dc.publisher.initials.fl_str_mv |
UFV |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Manejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização de |
publisher.none.fl_str_mv |
Universidade Federal de Viçosa |
dc.source.none.fl_str_mv |
reponame:LOCUS Repositório Institucional da UFV instname:Universidade Federal de Viçosa (UFV) instacron:UFV |
instname_str |
Universidade Federal de Viçosa (UFV) |
instacron_str |
UFV |
institution |
UFV |
reponame_str |
LOCUS Repositório Institucional da UFV |
collection |
LOCUS Repositório Institucional da UFV |
bitstream.url.fl_str_mv |
https://locus.ufv.br//bitstream/123456789/3031/1/texto%20completo.pdf https://locus.ufv.br//bitstream/123456789/3031/2/texto%20completo.pdf.txt https://locus.ufv.br//bitstream/123456789/3031/3/texto%20completo.pdf.jpg |
bitstream.checksum.fl_str_mv |
b5a7c3d4434414669ccdc700eb88fae2 c1b0776863bd58fc1b13781ad48d9b27 7fc98868cb0db3dc14593d17f1e30e0d |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
LOCUS Repositório Institucional da UFV - Universidade Federal de Viçosa (UFV) |
repository.mail.fl_str_mv |
fabiojreis@ufv.br |
_version_ |
1801212941700169728 |