Avaliação experimental de ligações de peças mistas madeira- concreto e entre peças de madeira com conectores de barra de aço e de concreto

• Autor(a) principal: Correia, Juliano
• Data de Publicação: 2010
• Tipo de documento: Dissertação
• Idioma: por
• Título da fonte: LOCUS Repositório Institucional da UFV
• Texto Completo: http://locus.ufv.br/handle/123456789/3735
• topic: Ligações madeira-concreto; Conectores de aço; Conectores de concreto; Wood-to-concrete joints; Steel connectors; Concrete connectors; CNPQ::ENGENHARIAS::ENGENHARIA CIVIL::ESTRUTURAS::ESTRUTURAS DE MADEIRAS

This work describes an experimental investigation of Wood-to- concrete and woodto- wood joints for composite members using steel-bar and concrete connectors. In wood concrete joints, symmetric three-member specimens were built, with wood outside pieces and concrete inside. In wood-to-wood joints, both three-member and two-member symmetric specimens were built. The steel-bar connectors consisted of straight pins with heads, cut from the bars, inserted normally to the wood surface and shaped like arches. They were simply driven into the wood, glued with an epoxy adhesive or with load distribution plate in compression side. The concrete connector’s joints are made with concrete-filled mortise. In addition, steel bars, placed normally to the joined pieces, were used to avoid opening and separation of the member during loading. In these connections, variable slope of the mortise and location at one or at both sides of the wood member are used. The specimens were then subjected to an increasing compressive force, and forcedisplacement diagrams were plotted, from which the stiffness were calculated, both of service (Ks) and ultimate limit states (Ks). These results for all connections have shown high values for strength and stiffness. In wood-to-concrete steel-bar connections ductile processes are obtained and the end failure occurs in concrete. In concrete connections, these results have shown that most of the failures occurred in a fragile manner, with stiffness remained approximately constant during the evaluation.