Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation

Detalhes bibliográficos
Autor(a) principal: Michida, Silvia
Data de Publicação: 2017
Outros Autores: Dal Piva, Amanda Maria de Oliveira, Tribst, João Paulo Mendes, Souza, Rodrigo Othávio Assunção, Lombardo, Geraldo, Bottino, Marco Antonio, Valandro, Luis Felipe
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Brazilian Dental Science
Texto Completo: https://ojs.ict.unesp.br/index.php/cob/article/view/1426
Resumo: Objective: To evaluate the effect of different irrigation solutions prior to post cementation on the resin bonding to bovine root dentine. Material and Methods: 60 bovine roots (16 mm) were prepared to 12 mm with specific drill of a double-tapered fiber post system, included in PMMA, and divided into 6 groups, considering the irrigation solutions (IS) prior to cementation: Gr1- saline solution (control), Gr2- NaOCl 0.5 %, Gr3- NaOCl 1 %, Gr4- NaOCl 2.5 %, Gr5- NaOCl 5 %, Gr6- Chlorexidine 2 % (solution). The root canals were irrigated with IS 20 ml during 10 min. Then they were rinsed with 20 ml of distilled water and dried with paper points. One fiber post was molded with polyvinylsiloxane and 60 posts made of resin cement (PRC) were obtained moments before the cementation. The root canal dentin was etched with H2PO3 37 %/15 s + washing/drying, a multi-bottle etch&rinse adhesive system was applied and the PRC were resin luted with dual resin cement (DuolinkTM, Bisco). Each specimen was cut into 4 slices of ±1.8mm in thickness and submitted to push-out test (1 mm/min). Results: ANOVA showed that bond strength was significantly affected by IS (P<0.0001). The highest bond strengths (MPa) were those for the groups 4 (3.51 ± 1.52) and 5 (3.0 ± 1.16). The groups 1 (0.70 ± 0.30), 2 (0.80 ± 0.24), 3 (1.26 ± 0.57) and 6 (0.90 ± 0.41) were statistically similar to each other. Conclusion: The resin bonding to the root dentine was higher when higher concentrations of hypochlorite solutions were used.KeywordsBond strength; Irrigation solutions; Push-out test; Resin cement; Root canal dentin.
id UNESP-20_46c5f418ba28c3281035b074e9a14e06
oai_identifier_str oai:ojs.pkp.sfu.ca:article/1426
network_acronym_str UNESP-20
network_name_str Brazilian Dental Science
repository_id_str
spelling Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementationObjective: To evaluate the effect of different irrigation solutions prior to post cementation on the resin bonding to bovine root dentine. Material and Methods: 60 bovine roots (16 mm) were prepared to 12 mm with specific drill of a double-tapered fiber post system, included in PMMA, and divided into 6 groups, considering the irrigation solutions (IS) prior to cementation: Gr1- saline solution (control), Gr2- NaOCl 0.5 %, Gr3- NaOCl 1 %, Gr4- NaOCl 2.5 %, Gr5- NaOCl 5 %, Gr6- Chlorexidine 2 % (solution). The root canals were irrigated with IS 20 ml during 10 min. Then they were rinsed with 20 ml of distilled water and dried with paper points. One fiber post was molded with polyvinylsiloxane and 60 posts made of resin cement (PRC) were obtained moments before the cementation. The root canal dentin was etched with H2PO3 37 %/15 s + washing/drying, a multi-bottle etch&rinse adhesive system was applied and the PRC were resin luted with dual resin cement (DuolinkTM, Bisco). Each specimen was cut into 4 slices of ±1.8mm in thickness and submitted to push-out test (1 mm/min). Results: ANOVA showed that bond strength was significantly affected by IS (P<0.0001). The highest bond strengths (MPa) were those for the groups 4 (3.51 ± 1.52) and 5 (3.0 ± 1.16). The groups 1 (0.70 ± 0.30), 2 (0.80 ± 0.24), 3 (1.26 ± 0.57) and 6 (0.90 ± 0.41) were statistically similar to each other. Conclusion: The resin bonding to the root dentine was higher when higher concentrations of hypochlorite solutions were used.KeywordsBond strength; Irrigation solutions; Push-out test; Resin cement; Root canal dentin.Institute of Science and Technology of São José dos Campos2017-06-28info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfapplication/vnd.openxmlformats-officedocument.wordprocessingml.documentapplication/vnd.openxmlformats-officedocument.wordprocessingml.documentimage/jpegimage/tiffhttps://ojs.ict.unesp.br/index.php/cob/article/view/142610.14295/bds.2017.v20i2.1426Brazilian Dental Science; Vol. 20 No. 2 (2017): Apr. - Jun. / 2017 - Published Jun 2017; 85-92Brazilian Dental Science; v. 20 n. 2 (2017): Apr. - Jun. / 2017 - Published Jun 2017; 85-922178-6011reponame:Brazilian Dental Scienceinstname:Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP)instacron:UNESPenghttps://ojs.ict.unesp.br/index.php/cob/article/view/1426/1154https://ojs.ict.unesp.br/index.php/cob/article/view/1426/2973https://ojs.ict.unesp.br/index.php/cob/article/view/1426/2974https://ojs.ict.unesp.br/index.php/cob/article/view/1426/2975https://ojs.ict.unesp.br/index.php/cob/article/view/1426/2976Copyright (c) 2017 Brazilian Dental Scienceinfo:eu-repo/semantics/openAccessMichida, SilviaDal Piva, Amanda Maria de OliveiraTribst, João Paulo MendesSouza, Rodrigo Othávio AssunçãoLombardo, GeraldoBottino, Marco AntonioValandro, Luis Felipe2020-01-28T12:14:52Zoai:ojs.pkp.sfu.ca:article/1426Revistahttp://bds.ict.unesp.br/PUBhttp://ojs.fosjc.unesp.br/index.php/index/oaisergio@fosjc.unesp.br||sergio@fosjc.unesp.br2178-60112178-6011opendoar:2022-11-08T16:30:12.595226Brazilian Dental Science - Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP)true
dc.title.none.fl_str_mv Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation
title Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation
spellingShingle Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation
Michida, Silvia
title_short Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation
title_full Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation
title_fullStr Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation
title_full_unstemmed Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation
title_sort Resin push-out bonding strength to root canal dentin: effect of the irrigation solution application prior to post cementation
author Michida, Silvia
author_facet Michida, Silvia
Dal Piva, Amanda Maria de Oliveira
Tribst, João Paulo Mendes
Souza, Rodrigo Othávio Assunção
Lombardo, Geraldo
Bottino, Marco Antonio
Valandro, Luis Felipe
author_role author
author2 Dal Piva, Amanda Maria de Oliveira
Tribst, João Paulo Mendes
Souza, Rodrigo Othávio Assunção
Lombardo, Geraldo
Bottino, Marco Antonio
Valandro, Luis Felipe
author2_role author
author
author
author
author
author
dc.contributor.author.fl_str_mv Michida, Silvia
Dal Piva, Amanda Maria de Oliveira
Tribst, João Paulo Mendes
Souza, Rodrigo Othávio Assunção
Lombardo, Geraldo
Bottino, Marco Antonio
Valandro, Luis Felipe
description Objective: To evaluate the effect of different irrigation solutions prior to post cementation on the resin bonding to bovine root dentine. Material and Methods: 60 bovine roots (16 mm) were prepared to 12 mm with specific drill of a double-tapered fiber post system, included in PMMA, and divided into 6 groups, considering the irrigation solutions (IS) prior to cementation: Gr1- saline solution (control), Gr2- NaOCl 0.5 %, Gr3- NaOCl 1 %, Gr4- NaOCl 2.5 %, Gr5- NaOCl 5 %, Gr6- Chlorexidine 2 % (solution). The root canals were irrigated with IS 20 ml during 10 min. Then they were rinsed with 20 ml of distilled water and dried with paper points. One fiber post was molded with polyvinylsiloxane and 60 posts made of resin cement (PRC) were obtained moments before the cementation. The root canal dentin was etched with H2PO3 37 %/15 s + washing/drying, a multi-bottle etch&rinse adhesive system was applied and the PRC were resin luted with dual resin cement (DuolinkTM, Bisco). Each specimen was cut into 4 slices of ±1.8mm in thickness and submitted to push-out test (1 mm/min). Results: ANOVA showed that bond strength was significantly affected by IS (P<0.0001). The highest bond strengths (MPa) were those for the groups 4 (3.51 ± 1.52) and 5 (3.0 ± 1.16). The groups 1 (0.70 ± 0.30), 2 (0.80 ± 0.24), 3 (1.26 ± 0.57) and 6 (0.90 ± 0.41) were statistically similar to each other. Conclusion: The resin bonding to the root dentine was higher when higher concentrations of hypochlorite solutions were used.KeywordsBond strength; Irrigation solutions; Push-out test; Resin cement; Root canal dentin.
publishDate 2017
dc.date.none.fl_str_mv 2017-06-28
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://ojs.ict.unesp.br/index.php/cob/article/view/1426
10.14295/bds.2017.v20i2.1426
url https://ojs.ict.unesp.br/index.php/cob/article/view/1426
identifier_str_mv 10.14295/bds.2017.v20i2.1426
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv https://ojs.ict.unesp.br/index.php/cob/article/view/1426/1154
https://ojs.ict.unesp.br/index.php/cob/article/view/1426/2973
https://ojs.ict.unesp.br/index.php/cob/article/view/1426/2974
https://ojs.ict.unesp.br/index.php/cob/article/view/1426/2975
https://ojs.ict.unesp.br/index.php/cob/article/view/1426/2976
dc.rights.driver.fl_str_mv Copyright (c) 2017 Brazilian Dental Science
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2017 Brazilian Dental Science
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/vnd.openxmlformats-officedocument.wordprocessingml.document
application/vnd.openxmlformats-officedocument.wordprocessingml.document
image/jpeg
image/tiff
dc.publisher.none.fl_str_mv Institute of Science and Technology of São José dos Campos
publisher.none.fl_str_mv Institute of Science and Technology of São José dos Campos
dc.source.none.fl_str_mv Brazilian Dental Science; Vol. 20 No. 2 (2017): Apr. - Jun. / 2017 - Published Jun 2017; 85-92
Brazilian Dental Science; v. 20 n. 2 (2017): Apr. - Jun. / 2017 - Published Jun 2017; 85-92
2178-6011
reponame:Brazilian Dental Science
instname:Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Brazilian Dental Science
collection Brazilian Dental Science
repository.name.fl_str_mv Brazilian Dental Science - Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP)
repository.mail.fl_str_mv sergio@fosjc.unesp.br||sergio@fosjc.unesp.br
_version_ 1788346899867107328