Reaproveitamento de bedames intercambiáveis
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da Universidade Estadual de Campinas (UNICAMP) |
Texto Completo: | https://hdl.handle.net/20.500.12733/1621080 |
Resumo: | Orientador: Amauri Hassui |
id |
UNICAMP-30_b6e8200ab9e605ef1eb2afa44fe1bcb6 |
---|---|
oai_identifier_str |
oai::912716 |
network_acronym_str |
UNICAMP-30 |
network_name_str |
Biblioteca Digital de Teses e Dissertações da Universidade Estadual de Campinas (UNICAMP) |
repository_id_str |
|
spelling |
Reaproveitamento de bedames intercambiáveisReuse of interchangeable parting toolsUsinagemFerramentas para cortar metaisFerro fundidoFerramentas de corteProcessos de fabricaçãoMachiningMetal-cutting toolsCast-ironCutting toolsProduction processesOrientador: Amauri HassuiDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia MecânicaResumo: Sabe-se que atualmente a competitividade das empresas é fator de sobrevivência. Assim, a busca por redução de custo é um constante desafio. Um aspecto dentro dos processos de fabricação que atua diretamente nesse tocante é o desenvolvimento de melhores ferramentas de corte. Este trabalho trata da reafiação de ferramentas de corte denominadas bedame, que possuem custo mais elevado que as demais ferramentas. O material usinado foi o ferro fundido nodular, que possui propriedades mecânicas características e consumir menor energia em sua fusão. Nos processos de usinagem são utilizadas as mesmas ferramentas para os ferros fundidos nodulares e cinzentos, porém o primeiro é um material dúctil, diferente do segundo que é frágil. Isso implica em um comportamento diferente na usinagem, mostrando que cabe neste caso uma melhor adequação das ferramentas de corte. Após a utilização de bedames novos, estes foram reafiados em quatro modelos diferentes. Posteriormente foram testados quatro tipos de revestimento PVD. Na sequência avaliou-se também a influência da velocidade de corte, avanço e concentração do fluido de corte. O critério adotado para a determinação do fim da vida dos bedames foi à qualidade da face usinada. Os ensaios foram feitos em sequência, sendo que o passo seguinte utilizava apenas os melhores resultados do passo anterior. Os resultados indicaram que bedames com ângulo de saída positivo, revestidos com AlTiN, usinando com menores velocidades de corte e avanço e com maior concentração de óleo no fluido de corte, apresentaram vida mais longa. Por outro lado, o mesmo bedame, só que revestido com TiCN e operando nas mesmas condições, apresentou a melhor relação custo benefício dentre os bedames reafiados. Concluiu-se assim que é viável economicamente a reafiação dos bedamesAbstract: It is known nowadays that the companies' competitiveness is a survival factor. So, the search for cost reduction is a constant challenge. One aspect of the manufacturing processes that act directly in this aspect is the development of better cutting tools. This work is about cutting tools to part materials named parting tools that has higher costs than the other cutting tools. The machined material was the nodular cast iron that has specific mechanical characteristics and demands less energy in its melting. In the machining processes it is usually used the same cutting tools to machine nodular and grey cast iron, but the first is ductile different from the second that is fragile. This implies in a different machining behavior, showing that is possible in this case a better adequation of the cutting tools. After using the new parting tools, they were resharpened in four different models. After that were tried four different PVD coatings. In the sequence it was also evaluated the influence of the cutting speed, the feed and cutting fluid concentration. The criteria adopted to determine the end of the parting tool life was the quality of the machined surface. The tests were carried out in sequence in such a way that the next step used just the best results of the former step. The results indicated that parting tool with positive rake angle, coated with AlTiN, operating in lower cutting speeds and feeds and with higher cutting fluid concentration, presented longer tool life. On the other hand, the same parting tool, but coated with TiCN and operating at the same cutting conditions, presented a better cost benefit relation among the resharpened cutting tools. It can be concluded that is economically feasible the parting tools resharpeningMestradoMateriais e Processos de FabricaçãoMestre em Engenharia Mecânica[s.n.]Hassui, Amauri, 1967-Rodrigues, Alessandro RogerNovaski, OlívioUniversidade Estadual de Campinas (UNICAMP). Faculdade de Engenharia MecânicaPrograma de Pós-Graduação em Engenharia MecânicaUNIVERSIDADE ESTADUAL DE CAMPINASMachado, Marcio Alexandre Gonçalves, 1974-2013info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdf77 f. : il.https://hdl.handle.net/20.500.12733/1621080MACHADO, Marcio Alexandre Gonçalves. Reaproveitamento de bedames intercambiáveis. 2013. 77 f. Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica , Campinas, SP. Disponível em: https://hdl.handle.net/20.500.12733/1621080. Acesso em: 3 set. 2024.https://repositorio.unicamp.br/acervo/detalhe/912716porreponame:Biblioteca Digital de Teses e Dissertações da Universidade Estadual de Campinas (UNICAMP)instname:Universidade Estadual de Campinas (UNICAMP)instacron:UNICAMPinfo:eu-repo/semantics/openAccess2017-02-18T07:06:03Zoai::912716Biblioteca Digital de Teses e DissertaçõesPUBhttp://repositorio.unicamp.br/oai/tese/oai.aspsbubd@unicamp.bropendoar:2017-02-18T07:06:03Biblioteca Digital de Teses e Dissertações da Universidade Estadual de Campinas (UNICAMP) - Universidade Estadual de Campinas (UNICAMP)false |
dc.title.none.fl_str_mv |
Reaproveitamento de bedames intercambiáveis Reuse of interchangeable parting tools |
title |
Reaproveitamento de bedames intercambiáveis |
spellingShingle |
Reaproveitamento de bedames intercambiáveis Machado, Marcio Alexandre Gonçalves, 1974- Usinagem Ferramentas para cortar metais Ferro fundido Ferramentas de corte Processos de fabricação Machining Metal-cutting tools Cast-iron Cutting tools Production processes |
title_short |
Reaproveitamento de bedames intercambiáveis |
title_full |
Reaproveitamento de bedames intercambiáveis |
title_fullStr |
Reaproveitamento de bedames intercambiáveis |
title_full_unstemmed |
Reaproveitamento de bedames intercambiáveis |
title_sort |
Reaproveitamento de bedames intercambiáveis |
author |
Machado, Marcio Alexandre Gonçalves, 1974- |
author_facet |
Machado, Marcio Alexandre Gonçalves, 1974- |
author_role |
author |
dc.contributor.none.fl_str_mv |
Hassui, Amauri, 1967- Rodrigues, Alessandro Roger Novaski, Olívio Universidade Estadual de Campinas (UNICAMP). Faculdade de Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UNIVERSIDADE ESTADUAL DE CAMPINAS |
dc.contributor.author.fl_str_mv |
Machado, Marcio Alexandre Gonçalves, 1974- |
dc.subject.por.fl_str_mv |
Usinagem Ferramentas para cortar metais Ferro fundido Ferramentas de corte Processos de fabricação Machining Metal-cutting tools Cast-iron Cutting tools Production processes |
topic |
Usinagem Ferramentas para cortar metais Ferro fundido Ferramentas de corte Processos de fabricação Machining Metal-cutting tools Cast-iron Cutting tools Production processes |
description |
Orientador: Amauri Hassui |
publishDate |
2013 |
dc.date.none.fl_str_mv |
2013 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://hdl.handle.net/20.500.12733/1621080 MACHADO, Marcio Alexandre Gonçalves. Reaproveitamento de bedames intercambiáveis. 2013. 77 f. Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica , Campinas, SP. Disponível em: https://hdl.handle.net/20.500.12733/1621080. Acesso em: 3 set. 2024. |
url |
https://hdl.handle.net/20.500.12733/1621080 |
identifier_str_mv |
MACHADO, Marcio Alexandre Gonçalves. Reaproveitamento de bedames intercambiáveis. 2013. 77 f. Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica , Campinas, SP. Disponível em: https://hdl.handle.net/20.500.12733/1621080. Acesso em: 3 set. 2024. |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://repositorio.unicamp.br/acervo/detalhe/912716 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf 77 f. : il. |
dc.publisher.none.fl_str_mv |
[s.n.] |
publisher.none.fl_str_mv |
[s.n.] |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da Universidade Estadual de Campinas (UNICAMP) instname:Universidade Estadual de Campinas (UNICAMP) instacron:UNICAMP |
instname_str |
Universidade Estadual de Campinas (UNICAMP) |
instacron_str |
UNICAMP |
institution |
UNICAMP |
reponame_str |
Biblioteca Digital de Teses e Dissertações da Universidade Estadual de Campinas (UNICAMP) |
collection |
Biblioteca Digital de Teses e Dissertações da Universidade Estadual de Campinas (UNICAMP) |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da Universidade Estadual de Campinas (UNICAMP) - Universidade Estadual de Campinas (UNICAMP) |
repository.mail.fl_str_mv |
sbubd@unicamp.br |
_version_ |
1809189104003317760 |