Production and characterization of laminated metal composite produced by cold roll bonding
Autor(a) principal: | |
---|---|
Data de Publicação: | 2018 |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/749 |
Resumo: | The growing interest in the industries for laminated metal composite results in the needed to develop manufacturing technologies each time more efficiently. Ever since is a topic of a few discussion in Brazil and it results on the delay in scientific knowledge about the subject, the present work goals to produce a laminated metal composite by the cold roll bonding process in order to improve the national material competitiveness in the external marketplace. The first composite proposed was constitute by aluminium AA1050 and duplex stainless steel UNS S32304. Once the production attempts were ineffective, the second material replaced by a ferritic stainless steel AISI 430 in order to understand the bonding mechanism. The use of this metal allowed the laminated metal composite production and posterior study with peeling test, microestrutural analysis of the materials bonding mechanism. |
id |
UNIFEI_0a89d5a69a8087b9236842e14feca699 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/749 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Production and characterization of laminated metal composite produced by cold roll bondingProducción y caracterización de compuestos metálicos laminados producidos por laminación en fríoProdução e caracterização de compósito metálico laminado produzido por laminação à frioRevestimento por laminaçãoIntermetálicoAderência.Revestimiento por laminaciónintermetálicoAgarre.Revetment by rollingIntermetallicAdhesion.The growing interest in the industries for laminated metal composite results in the needed to develop manufacturing technologies each time more efficiently. Ever since is a topic of a few discussion in Brazil and it results on the delay in scientific knowledge about the subject, the present work goals to produce a laminated metal composite by the cold roll bonding process in order to improve the national material competitiveness in the external marketplace. The first composite proposed was constitute by aluminium AA1050 and duplex stainless steel UNS S32304. Once the production attempts were ineffective, the second material replaced by a ferritic stainless steel AISI 430 in order to understand the bonding mechanism. The use of this metal allowed the laminated metal composite production and posterior study with peeling test, microestrutural analysis of the materials bonding mechanism.El creciente interés por las industrias por compuestos metálicos laminados resultó de la necesidad de desarrollar tecnologías de fabricación cada vez más eficientes. En el presente trabajo se objetivó la producción de un compuesto metálico laminado por medio del proceso de laminación en frío en el intento de mejorar las condiciones de competitividad del material nacional, con el mercado exterior. El primer compuesto propuesto estaba constituido por aluminio comercial AA1050 y acero dúplex UNS S32304. Una vez los intentos de su producción fueron ineficaces, el segundo fue sustituido por el acero inoxidable ferrítico AISI 430 con el objetivo de entender los mecanismos de conexión. El uso de este metal permitió la producción de compuestos metálicos laminados y posterior estudio con ensayos de adherencia (peeling) y análisis microestructurales del mecanismo de adherencia de los materiales.O crescente interesse pelas indústrias por compósitos metálicos laminados resultou da necessidade de se desenvolver tecnologias de fabricação cada vez mais eficientes. Visto que é um assunto de pouco debate no Brasil e resultou no atraso do conhecimento científico do assunto, o presente trabalho objetivou a produção de um composto metálico laminado por meio do processo de laminação a frio na tentativa de melhorar as condições de competitividade do material nacional com o mercado exterior. O primeiro composto proposto era constituído por alumínio comercial AA1050 e aço inoxidável duplex UNS S32304. Uma vez as tentativas de sua produção foram ineficazes, o segundo foi substituído pelo aço inoxidável ferrítico AISI 430 com o objetivo de entender os mecanismos de ligação. O uso desse metal permitiu a produção de compósitos metálicos laminados e posterior estudo com ensaios de aderência (peeling) e análises microestruturais do mecanismo de aderência dos materiais.Research, Society and Development2018-12-18info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/74910.33448/rsd-v8i2.749Research, Society and Development; Vol. 8 No. 2; e4082749Research, Society and Development; Vol. 8 Núm. 2; e4082749Research, Society and Development; v. 8 n. 2; e40827492525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIporhttps://rsdjournal.org/index.php/rsd/article/view/749/666Copyright (c) 2019 Renan Ryuji Murashita Takenakainfo:eu-repo/semantics/openAccessTakenaka, Renan Ryuji Murashita2020-03-25T16:07:09Zoai:ojs.pkp.sfu.ca:article/749Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:26:04.694835Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Production and characterization of laminated metal composite produced by cold roll bonding Producción y caracterización de compuestos metálicos laminados producidos por laminación en frío Produção e caracterização de compósito metálico laminado produzido por laminação à frio |
title |
Production and characterization of laminated metal composite produced by cold roll bonding |
spellingShingle |
Production and characterization of laminated metal composite produced by cold roll bonding Takenaka, Renan Ryuji Murashita Revestimento por laminação Intermetálico Aderência. Revestimiento por laminación intermetálico Agarre. Revetment by rolling Intermetallic Adhesion. |
title_short |
Production and characterization of laminated metal composite produced by cold roll bonding |
title_full |
Production and characterization of laminated metal composite produced by cold roll bonding |
title_fullStr |
Production and characterization of laminated metal composite produced by cold roll bonding |
title_full_unstemmed |
Production and characterization of laminated metal composite produced by cold roll bonding |
title_sort |
Production and characterization of laminated metal composite produced by cold roll bonding |
author |
Takenaka, Renan Ryuji Murashita |
author_facet |
Takenaka, Renan Ryuji Murashita |
author_role |
author |
dc.contributor.author.fl_str_mv |
Takenaka, Renan Ryuji Murashita |
dc.subject.por.fl_str_mv |
Revestimento por laminação Intermetálico Aderência. Revestimiento por laminación intermetálico Agarre. Revetment by rolling Intermetallic Adhesion. |
topic |
Revestimento por laminação Intermetálico Aderência. Revestimiento por laminación intermetálico Agarre. Revetment by rolling Intermetallic Adhesion. |
description |
The growing interest in the industries for laminated metal composite results in the needed to develop manufacturing technologies each time more efficiently. Ever since is a topic of a few discussion in Brazil and it results on the delay in scientific knowledge about the subject, the present work goals to produce a laminated metal composite by the cold roll bonding process in order to improve the national material competitiveness in the external marketplace. The first composite proposed was constitute by aluminium AA1050 and duplex stainless steel UNS S32304. Once the production attempts were ineffective, the second material replaced by a ferritic stainless steel AISI 430 in order to understand the bonding mechanism. The use of this metal allowed the laminated metal composite production and posterior study with peeling test, microestrutural analysis of the materials bonding mechanism. |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018-12-18 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/749 10.33448/rsd-v8i2.749 |
url |
https://rsdjournal.org/index.php/rsd/article/view/749 |
identifier_str_mv |
10.33448/rsd-v8i2.749 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/749/666 |
dc.rights.driver.fl_str_mv |
Copyright (c) 2019 Renan Ryuji Murashita Takenaka info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Copyright (c) 2019 Renan Ryuji Murashita Takenaka |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 8 No. 2; e4082749 Research, Society and Development; Vol. 8 Núm. 2; e4082749 Research, Society and Development; v. 8 n. 2; e4082749 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052829220732928 |