Reprocessing with orthopedic surgery instrument in a material and sterilization center

Detalhes bibliográficos
Autor(a) principal: Pereira, Hedna Maiara Bernardo
Data de Publicação: 2021
Outros Autores: Melo, Constance Majoi Fabricio de, Oliveira, Gésica Kelly da Silva, Souza, Gracielly Karine Tavares, Fernandes, Sabrina Emylle Torres, Alves, Nemório Rodrigues, Hollanda, Gabriela Silva Esteves de, Ferreira, Nadja Silva, Mendonça, Renata Angélica de Oliveira Rosa
Tipo de documento: Artigo
Idioma: por
Título da fonte: Research, Society and Development
Texto Completo: https://rsdjournal.org/index.php/rsd/article/view/21200
Resumo: Objective: To analyze the causes of reprocessing due to non-conformities of orthopedic surgery instruments in a Material and Sterilization Center (CME). Method: This was a descriptive exploratory, retrospective study with a quantitative approach, developed in a class II MSC, based on the service reprocessing notification book and notifications from the VIGIHOSP Risk Management and Patient Safety software. Results: From the identification of the number of repetitions of each non-conformity in specific boxes, it was possible to see that the loss of packaging integrity is the main cause of rework. Conclusion: The most reprocessed orthopedic surgery boxes are in accordance with the guidelines recommended, however, compliance is not preventing the loss of packaging integrity.
id UNIFEI_115085707d648b2a6f71bcfed0f4402d
oai_identifier_str oai:ojs.pkp.sfu.ca:article/21200
network_acronym_str UNIFEI
network_name_str Research, Society and Development
repository_id_str
spelling Reprocessing with orthopedic surgery instrument in a material and sterilization centerReprocesamiento de instrumentos de cirugía ortopédica en un centro de material y esterilizaciónReprocessamento de instrumental de cirurgia ortopédica em um centro de material e esterilizaçãoCentro esterilizaçãoEsterilizaçãoGestão.Sterilization centerSterilizationManagement.Centro de esterilizaciónEsterilizaciónAdministración.Objective: To analyze the causes of reprocessing due to non-conformities of orthopedic surgery instruments in a Material and Sterilization Center (CME). Method: This was a descriptive exploratory, retrospective study with a quantitative approach, developed in a class II MSC, based on the service reprocessing notification book and notifications from the VIGIHOSP Risk Management and Patient Safety software. Results: From the identification of the number of repetitions of each non-conformity in specific boxes, it was possible to see that the loss of packaging integrity is the main cause of rework. Conclusion: The most reprocessed orthopedic surgery boxes are in accordance with the guidelines recommended, however, compliance is not preventing the loss of packaging integrity.Objetivo: Analizar las causas de reprocesamiento por no conformidades de instrumental de cirugía ortopédica en un Centro de Material y Esterilización (CME). Método: Estudio descriptivo, exploratorio, retrospectivo con abordaje cuantitativo, desarrollado en un MSC clase II, basado en el libro de notificaciones de reprocesamiento del servicio y notificaciones del software VIGIHOSP de Gestión de Riesgos y Seguridad del Paciente. Resultados: A partir de la identificación del número de repeticiones de cada no conformidad en cajas específicas, se pudo constatar que la pérdida de integridad del empaque es la principal causa de retrabajo. Conclusión: Las cajas de cirugía ortopédica más reprocesadas están de acuerdo con las pautas recomendadas, sin embargo, el cumplimiento no evita la pérdida de la integridad del empaque.Objetivo: Analisar as causas de reprocessamento por não conformidades dos instrumentais de cirurgia ortopédica em um Centro de Material e Esterilização (CME). Método: Trata-se de um estudo descritivo exploratório, retrospectivo, de abordagem quantitativa, desenvolvido em um CME de classe II, a partir do livro de notificação de reprocessamento do serviço e das notificações do software de Gestão de Riscos e Segurança do paciente VIGIHOSP. Resultados: A partir da identificação do quantitativo de repetição de cada não conformidade em caixas específicas, foi possível perceber que a perda da integridade da embalagem é a principal causa de retrabalho. Conclusão: As caixas de cirurgias ortopédica mais reprocessadas estão de acordo com o preconizado nas diretrizes, no entanto, a conformidade, não está evitando a perda da integridade da embalagem.Research, Society and Development2021-10-10info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/2120010.33448/rsd-v10i13.21200Research, Society and Development; Vol. 10 No. 13; e227101321200Research, Society and Development; Vol. 10 Núm. 13; e227101321200Research, Society and Development; v. 10 n. 13; e2271013212002525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIporhttps://rsdjournal.org/index.php/rsd/article/view/21200/18849Copyright (c) 2021 Hedna Maiara Bernardo Pereira; Constance Majoi Fabricio de Melo; Gésica Kelly da Silva Oliveira; Gracielly Karine Tavares Souza; Sabrina Emylle Torres Fernandes; Nemório Rodrigues Alves; Gabriela Silva Esteves de Hollanda; Nadja Silva Ferreira; Renata Angélica de Oliveira Rosa Mendonçahttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessPereira, Hedna Maiara Bernardo Melo, Constance Majoi Fabricio deOliveira, Gésica Kelly da Silva Souza, Gracielly Karine Tavares Fernandes, Sabrina Emylle TorresAlves, Nemório Rodrigues Hollanda, Gabriela Silva Esteves deFerreira, Nadja Silva Mendonça, Renata Angélica de Oliveira Rosa 2021-11-21T18:26:28Zoai:ojs.pkp.sfu.ca:article/21200Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:40:40.358258Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false
dc.title.none.fl_str_mv Reprocessing with orthopedic surgery instrument in a material and sterilization center
Reprocesamiento de instrumentos de cirugía ortopédica en un centro de material y esterilización
Reprocessamento de instrumental de cirurgia ortopédica em um centro de material e esterilização
title Reprocessing with orthopedic surgery instrument in a material and sterilization center
spellingShingle Reprocessing with orthopedic surgery instrument in a material and sterilization center
Pereira, Hedna Maiara Bernardo
Centro esterilização
Esterilização
Gestão.
Sterilization center
Sterilization
Management.
Centro de esterilización
Esterilización
Administración.
title_short Reprocessing with orthopedic surgery instrument in a material and sterilization center
title_full Reprocessing with orthopedic surgery instrument in a material and sterilization center
title_fullStr Reprocessing with orthopedic surgery instrument in a material and sterilization center
title_full_unstemmed Reprocessing with orthopedic surgery instrument in a material and sterilization center
title_sort Reprocessing with orthopedic surgery instrument in a material and sterilization center
author Pereira, Hedna Maiara Bernardo
author_facet Pereira, Hedna Maiara Bernardo
Melo, Constance Majoi Fabricio de
Oliveira, Gésica Kelly da Silva
Souza, Gracielly Karine Tavares
Fernandes, Sabrina Emylle Torres
Alves, Nemório Rodrigues
Hollanda, Gabriela Silva Esteves de
Ferreira, Nadja Silva
Mendonça, Renata Angélica de Oliveira Rosa
author_role author
author2 Melo, Constance Majoi Fabricio de
Oliveira, Gésica Kelly da Silva
Souza, Gracielly Karine Tavares
Fernandes, Sabrina Emylle Torres
Alves, Nemório Rodrigues
Hollanda, Gabriela Silva Esteves de
Ferreira, Nadja Silva
Mendonça, Renata Angélica de Oliveira Rosa
author2_role author
author
author
author
author
author
author
author
dc.contributor.author.fl_str_mv Pereira, Hedna Maiara Bernardo
Melo, Constance Majoi Fabricio de
Oliveira, Gésica Kelly da Silva
Souza, Gracielly Karine Tavares
Fernandes, Sabrina Emylle Torres
Alves, Nemório Rodrigues
Hollanda, Gabriela Silva Esteves de
Ferreira, Nadja Silva
Mendonça, Renata Angélica de Oliveira Rosa
dc.subject.por.fl_str_mv Centro esterilização
Esterilização
Gestão.
Sterilization center
Sterilization
Management.
Centro de esterilización
Esterilización
Administración.
topic Centro esterilização
Esterilização
Gestão.
Sterilization center
Sterilization
Management.
Centro de esterilización
Esterilización
Administración.
description Objective: To analyze the causes of reprocessing due to non-conformities of orthopedic surgery instruments in a Material and Sterilization Center (CME). Method: This was a descriptive exploratory, retrospective study with a quantitative approach, developed in a class II MSC, based on the service reprocessing notification book and notifications from the VIGIHOSP Risk Management and Patient Safety software. Results: From the identification of the number of repetitions of each non-conformity in specific boxes, it was possible to see that the loss of packaging integrity is the main cause of rework. Conclusion: The most reprocessed orthopedic surgery boxes are in accordance with the guidelines recommended, however, compliance is not preventing the loss of packaging integrity.
publishDate 2021
dc.date.none.fl_str_mv 2021-10-10
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/21200
10.33448/rsd-v10i13.21200
url https://rsdjournal.org/index.php/rsd/article/view/21200
identifier_str_mv 10.33448/rsd-v10i13.21200
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/21200/18849
dc.rights.driver.fl_str_mv https://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Research, Society and Development
publisher.none.fl_str_mv Research, Society and Development
dc.source.none.fl_str_mv Research, Society and Development; Vol. 10 No. 13; e227101321200
Research, Society and Development; Vol. 10 Núm. 13; e227101321200
Research, Society and Development; v. 10 n. 13; e227101321200
2525-3409
reponame:Research, Society and Development
instname:Universidade Federal de Itajubá (UNIFEI)
instacron:UNIFEI
instname_str Universidade Federal de Itajubá (UNIFEI)
instacron_str UNIFEI
institution UNIFEI
reponame_str Research, Society and Development
collection Research, Society and Development
repository.name.fl_str_mv Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)
repository.mail.fl_str_mv rsd.articles@gmail.com
_version_ 1797052691961085952

Registros relacionados