Comparative analysis of alternative mortars produced with different types of waste
Autor(a) principal: | |
---|---|
Data de Publicação: | 2022 |
Outros Autores: | , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/35668 |
Resumo: | The search for alternative materials that ensure adequate performance and reduction of environmental impacts, aiming to ensure our needs without compromising the survivability of future generations, is one of the biggest challenges today. Thus, this work aims to compare the effects of the incorporation of residues of different typologies in mortars, through the comparative method, which seeks to verify similarities and explain divergences between the samples evaluated. To perform the comparison, three studies from the same research group were selected and the results of the common trials were analyzed among the three studies: axial compressive strength (at 28 days), water absorption by capillarity, water absorption by immersion and void index. The result of the analysis showed that the typology of the residue and the substitution content can influence the physical and mechanical properties of the mixtures. Among the substitutions of the aggregate was the reduction in mechanical properties, however, there was better performance in the physical parameters of the mixtures. In relation to mortars with partial replacement of the binder, it was noticed that both for the mechanical parameters and for the physical parameters analyzed presented satisfactory results. |
id |
UNIFEI_24b21c6f149ea7e6d4fa5adfb1d5f8e0 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/35668 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Comparative analysis of alternative mortars produced with different types of wasteAnálisis comparativo de morteros alternativos producidos con diferentes tipos de residuosAnálise comparativa de argamassas alternativas produzidas com diferentes tipologias de resíduosArgamassaResíduo de construção civilResíduo de cerâmica vermelhaResíduo de borrachaTecnologia da arquitetura.MorteroResiduos de construcciónResiduo cerámico rojo Residuo de cauchoTecnología de arquitectura.MortarConstruction wasteRed ceramic residueRubber residueArchitecture technology.The search for alternative materials that ensure adequate performance and reduction of environmental impacts, aiming to ensure our needs without compromising the survivability of future generations, is one of the biggest challenges today. Thus, this work aims to compare the effects of the incorporation of residues of different typologies in mortars, through the comparative method, which seeks to verify similarities and explain divergences between the samples evaluated. To perform the comparison, three studies from the same research group were selected and the results of the common trials were analyzed among the three studies: axial compressive strength (at 28 days), water absorption by capillarity, water absorption by immersion and void index. The result of the analysis showed that the typology of the residue and the substitution content can influence the physical and mechanical properties of the mixtures. Among the substitutions of the aggregate was the reduction in mechanical properties, however, there was better performance in the physical parameters of the mixtures. In relation to mortars with partial replacement of the binder, it was noticed that both for the mechanical parameters and for the physical parameters analyzed presented satisfactory results.La búsqueda de materiales alternativos que aseguren un rendimiento adecuado y la reducción de los impactos ambientales, con el objetivo de garantizar nuestras necesidades sin comprometer la capacidad de supervivencia de las generaciones futuras, es uno de los mayores desafíos en la actualidad. Así, este trabajo pretende comparar los efectos de la incorporación de residuos de diferentes tipologías en morteros, a través del método comparativo, que busca verificar similitudes y explicar divergencias entre las muestras evaluadas. Para realizar la comparación, se seleccionaron tres estudios del mismo grupo de investigación y se analizaron los resultados de los ensayos comunes entre los tres estudios: resistencia a la compresión axial (a los 28 días), absorción de agua por capilaridad, absorción de agua por inmersión e índice de vacío. El resultado del análisis mostró que la tipología del residuo y el contenido de sustitución pueden influir en las propiedades físicas y mecánicas de las mezclas. Entre las sustituciones del agregado estuvo la reducción de las propiedades mecánicas, sin embargo, hubo un mejor desempeño en los parámetros físicos de las mezclas. En relación con los morteros con reemplazo parcial del aglutinante, se observó que tanto para los parámetros mecánicos como para los parámetros físicos analizados presentaban resultados satisfactorios.A busca por materiais alternativos que garantam o desempenho adequado e a redução dos impactos ambientais, visando garantir nossas necessidades sem comprometer a capacidade de sobrevivência das gerações futuras, é um dos maiores desafios da atualidade. Desta forma, este trabalho tem como objetivo comparar os efeitos da incorporação de resíduos de diferentes tipologias em argamassas, através do método comparativo, que busca verificar semelhanças e explicar divergências entre as amostras avaliadas. Para realizar a comparação foram selecionados três trabalhos de um mesmo grupo de pesquisa e analisou-se os resultados dos ensaios comuns entre os três estudos, sendo eles: resistência à compressão axial (aos 28 dias), absorção de água por capilaridade, absorção de água por imersão e índice de vazios. O resultado da análise demonstrou que a tipologia do resíduo e o teor de substituição podem exercer influência nas propriedades físicas e mecânicas das misturas. Observou-se entre as substituições do agregado a redução nas propriedades mecânicas, no entanto, houve melhor desempenho nos parâmetros físicos das misturas. Já em relação as argamassas com substituição parcial do aglomerante, notou-se que tanto para os parâmetros mecânicos quanto para os parâmetros físicos analisados apresentaram resultados satisfatórios.Research, Society and Development2022-10-10info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/3566810.33448/rsd-v11i13.35668Research, Society and Development; Vol. 11 No. 13; e405111335668Research, Society and Development; Vol. 11 Núm. 13; e405111335668Research, Society and Development; v. 11 n. 13; e4051113356682525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIporhttps://rsdjournal.org/index.php/rsd/article/view/35668/29829Copyright (c) 2022 Ana Paula Sturbelle Schiller; Francielli Priebbernow Pinz; Mônica Navarini Kurz; Charlei Marcelo Paliga; Ariela da Silva Torreshttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessSchiller, Ana Paula Sturbelle Pinz, Francielli PriebbernowKurz, Mônica NavariniPaliga, Charlei MarceloTorres, Ariela da Silva2022-10-17T13:43:46Zoai:ojs.pkp.sfu.ca:article/35668Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:50:30.209762Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Comparative analysis of alternative mortars produced with different types of waste Análisis comparativo de morteros alternativos producidos con diferentes tipos de residuos Análise comparativa de argamassas alternativas produzidas com diferentes tipologias de resíduos |
title |
Comparative analysis of alternative mortars produced with different types of waste |
spellingShingle |
Comparative analysis of alternative mortars produced with different types of waste Schiller, Ana Paula Sturbelle Argamassa Resíduo de construção civil Resíduo de cerâmica vermelha Resíduo de borracha Tecnologia da arquitetura. Mortero Residuos de construcción Residuo cerámico rojo Residuo de caucho Tecnología de arquitectura. Mortar Construction waste Red ceramic residue Rubber residue Architecture technology. |
title_short |
Comparative analysis of alternative mortars produced with different types of waste |
title_full |
Comparative analysis of alternative mortars produced with different types of waste |
title_fullStr |
Comparative analysis of alternative mortars produced with different types of waste |
title_full_unstemmed |
Comparative analysis of alternative mortars produced with different types of waste |
title_sort |
Comparative analysis of alternative mortars produced with different types of waste |
author |
Schiller, Ana Paula Sturbelle |
author_facet |
Schiller, Ana Paula Sturbelle Pinz, Francielli Priebbernow Kurz, Mônica Navarini Paliga, Charlei Marcelo Torres, Ariela da Silva |
author_role |
author |
author2 |
Pinz, Francielli Priebbernow Kurz, Mônica Navarini Paliga, Charlei Marcelo Torres, Ariela da Silva |
author2_role |
author author author author |
dc.contributor.author.fl_str_mv |
Schiller, Ana Paula Sturbelle Pinz, Francielli Priebbernow Kurz, Mônica Navarini Paliga, Charlei Marcelo Torres, Ariela da Silva |
dc.subject.por.fl_str_mv |
Argamassa Resíduo de construção civil Resíduo de cerâmica vermelha Resíduo de borracha Tecnologia da arquitetura. Mortero Residuos de construcción Residuo cerámico rojo Residuo de caucho Tecnología de arquitectura. Mortar Construction waste Red ceramic residue Rubber residue Architecture technology. |
topic |
Argamassa Resíduo de construção civil Resíduo de cerâmica vermelha Resíduo de borracha Tecnologia da arquitetura. Mortero Residuos de construcción Residuo cerámico rojo Residuo de caucho Tecnología de arquitectura. Mortar Construction waste Red ceramic residue Rubber residue Architecture technology. |
description |
The search for alternative materials that ensure adequate performance and reduction of environmental impacts, aiming to ensure our needs without compromising the survivability of future generations, is one of the biggest challenges today. Thus, this work aims to compare the effects of the incorporation of residues of different typologies in mortars, through the comparative method, which seeks to verify similarities and explain divergences between the samples evaluated. To perform the comparison, three studies from the same research group were selected and the results of the common trials were analyzed among the three studies: axial compressive strength (at 28 days), water absorption by capillarity, water absorption by immersion and void index. The result of the analysis showed that the typology of the residue and the substitution content can influence the physical and mechanical properties of the mixtures. Among the substitutions of the aggregate was the reduction in mechanical properties, however, there was better performance in the physical parameters of the mixtures. In relation to mortars with partial replacement of the binder, it was noticed that both for the mechanical parameters and for the physical parameters analyzed presented satisfactory results. |
publishDate |
2022 |
dc.date.none.fl_str_mv |
2022-10-10 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/35668 10.33448/rsd-v11i13.35668 |
url |
https://rsdjournal.org/index.php/rsd/article/view/35668 |
identifier_str_mv |
10.33448/rsd-v11i13.35668 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/35668/29829 |
dc.rights.driver.fl_str_mv |
https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 11 No. 13; e405111335668 Research, Society and Development; Vol. 11 Núm. 13; e405111335668 Research, Society and Development; v. 11 n. 13; e405111335668 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052725235548160 |