Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing

Detalhes bibliográficos
Autor(a) principal: Moura, Lyneker Souza de
Data de Publicação: 2021
Outros Autores: Reis, Ana Carolina dos Santos, Silva, Carina Lessa, Bezerra , João Pedro Santana, Nóbrega, Ana Cecília Vieira da, Carneiro , Arnaldo Manoel Pereira
Tipo de documento: Artigo
Idioma: por
Título da fonte: Research, Society and Development
Texto Completo: https://rsdjournal.org/index.php/rsd/article/view/13975
Resumo: Adhesiveness is an important quality indicator for asphalt mixtures of rolling layers in pavements. Frequent consequences of poor adhesion of the binder to aggregate are slippage and disintegration, as well as reduced durability. Thus, it is necessary to evaluate and fully understand this phenomenon. In the present research, different approaches were used in order to analyze the adhesiveness when there is incorporation of textile sludge, a polluting industrial residue also coming from textile laundries located at the Confeste do APL of Agreste Pernambucano, to asphalt matrices. The sludge was added directly to the adherent material in contents of 2.0 and 3.0% in relation to the total mass of the mixture, and these samples were compared, by means of adhesiveness, to the reference, without sludge. The adhesiveness was analyzed qualitatively by conventional adhesion test described by Brazilian standard DNIT ME 078/1994. The aggregate area covered by ligand was calculated by means of digital image processing and the mixture surface interface was analyzed by microscopy petrographic. The results showed that the insertion of sludge in the mixture does not affect the adhesion of the mixture, since the three samples did not present pickling of the film and the area covered by binder was 100%. Petrographic microscopy showed that the mastic film (binder and textile sludge) penetrated even smaller void pores, this result demonstrates that the increase in viscosity did not harm the spreading on the aggregate surface and that asphalt matrices can be a good form of imprisonment of the studied waste.
id UNIFEI_468ac2c4ecbe052c33c437fc35f42907
oai_identifier_str oai:ojs.pkp.sfu.ca:article/13975
network_acronym_str UNIFEI
network_name_str Research, Society and Development
repository_id_str
spelling Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processingEvaluación de la adhesividad del ligante asfáltico modificado con lodos textiles mediante procesado digital de imagenAvaliação da adesividade do ligante asfáltico modificado com lodo têxtil por meio do processamento digital de imagensAdhesivenessTextile sludgeAsphalt mixtures.AdhesividadLodos textilesMezclas asfálticas.AdesividadeLodo têxtilMisturas asfálticas.Adhesiveness is an important quality indicator for asphalt mixtures of rolling layers in pavements. Frequent consequences of poor adhesion of the binder to aggregate are slippage and disintegration, as well as reduced durability. Thus, it is necessary to evaluate and fully understand this phenomenon. In the present research, different approaches were used in order to analyze the adhesiveness when there is incorporation of textile sludge, a polluting industrial residue also coming from textile laundries located at the Confeste do APL of Agreste Pernambucano, to asphalt matrices. The sludge was added directly to the adherent material in contents of 2.0 and 3.0% in relation to the total mass of the mixture, and these samples were compared, by means of adhesiveness, to the reference, without sludge. The adhesiveness was analyzed qualitatively by conventional adhesion test described by Brazilian standard DNIT ME 078/1994. The aggregate area covered by ligand was calculated by means of digital image processing and the mixture surface interface was analyzed by microscopy petrographic. The results showed that the insertion of sludge in the mixture does not affect the adhesion of the mixture, since the three samples did not present pickling of the film and the area covered by binder was 100%. Petrographic microscopy showed that the mastic film (binder and textile sludge) penetrated even smaller void pores, this result demonstrates that the increase in viscosity did not harm the spreading on the aggregate surface and that asphalt matrices can be a good form of imprisonment of the studied waste.La adhesividad es un indicador de calidad importante para mezclas asfálticas de capas rodantes en pavimentos. Las consecuencias frecuentes de una mala adhesión del aglutinante al agregado son el deslizamiento y desintegración, así como menor durabilidad. Así, es necesario evaluar y comprender plenamente este fenómeno. En la presente investigación se utilizaron diferentes enfoques para analizar la adhesividad ante incorporación de lodos textiles, residuo industrial contaminante proveniente también de lavanderías textiles ubicadas en Confeste do APL de Agreste Pernambucano, a matrices asfálticas. El lodo se adicionó directamente al material adherente en los contenidos de 2.0 y 3.0% en relación a masa total de la mezcla, y estas muestras se compararon, mediante adhesividad, con la referencia, sin lodo. La adhesividad se analizó cualitativamente mediante prueba de adhesión convencional descrita por la norma brasileña DNIT ME 078/1994. El área agregada cubierta por ligando se calculó mediante procesamiento de imagen digital y finalmente, la interfase de la superficie de la mezcla se analizó por microscopía petrográfica. Los resultados mostraron que la inserción de lodos en la mezcla no afecta la adherencia, ya que las muestras no presentaron ningún desprendimiento de la película y el área cubierta por aglutinante fue del 100%. La microscopía petrográfica mostró que la película de masilla (ligante y lodo textil) penetraba poros vacíos aún más pequeños, resultado que demuestra que el aumento de viscosidad no dañó la extensión en la superficie del agregado y que matrices asfálticas pueden ser una buena forma de aprisionamiento de los residuos estudiados.A adesividade é um importante indicador de qualidade para misturas asfálticas de camadas de rolamento em pavimentos. Consequências frequentes da má adesividade do ligante ao agregado são deslizamento e desagregação, bem como a redução da durabilidade. Assim, é necessária a avaliação e compreensão integral deste fenômeno. Na presente pesquisa, foram utilizadas diferentes abordagens objetivando analisar a adesividade quando há incorporação de lodo têxtil, um resíduo industrial poluente proveniente também das lavanderias têxteis localizadas no APL de Confecções do Agreste Pernambucano, a matrizes asfálticas. O lodo foi adicionado diretamente ao material aderente nos teores de 2,0 e 3,0% em relação à massa total da mistura, sendo essas amostras comparadas, por meio da adesividade, a de referência, sem lodo. A adesividade foi analisada qualitativamente pelo ensaio convencional de adesividade, descrito pela norma brasileira DNIT ME 078/1994. A área de agregado recoberto por ligante foi calculada por meio do processamento digital de imagens e por fim, a interface da superfície da mistura foi analisada por microscopia petrográfica. Os resultados apontaram que a inserção de lodo na mistura não prejudica a adesividade da mesma, visto que as três amostras não apresentaram decapagem da película e a área recoberta por ligante foi de 100%. A microscopia petrográfica mostrou que a película de mastique (ligante e lodo têxtil) penetrou até mesmo poros de vazios menores, resultado que demonstra que o aumento de viscosidade não prejudicou o espalhamento na superfície do agregado e que as matrizes asfálticas podem ser uma boa forma de aprisionamento do resíduo estudado.Research, Society and Development2021-04-02info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/1397510.33448/rsd-v10i4.13975Research, Society and Development; Vol. 10 No. 4; e12110413975Research, Society and Development; Vol. 10 Núm. 4; e12110413975Research, Society and Development; v. 10 n. 4; e121104139752525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIporhttps://rsdjournal.org/index.php/rsd/article/view/13975/12488Copyright (c) 2021 Lyneker Souza de Moura; Ana Carolina dos Santos Reis; Carina Lessa Silva; João Pedro Santana Bezerra ; Ana Cecília Vieira da Nóbrega; Arnaldo Manoel Pereira Carneiro https://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessMoura, Lyneker Souza de Reis, Ana Carolina dos Santos Silva, Carina Lessa Bezerra , João Pedro Santana Nóbrega, Ana Cecília Vieira da Carneiro , Arnaldo Manoel Pereira 2021-04-25T11:21:26Zoai:ojs.pkp.sfu.ca:article/13975Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:35:12.243748Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false
dc.title.none.fl_str_mv Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing
Evaluación de la adhesividad del ligante asfáltico modificado con lodos textiles mediante procesado digital de imagen
Avaliação da adesividade do ligante asfáltico modificado com lodo têxtil por meio do processamento digital de imagens
title Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing
spellingShingle Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing
Moura, Lyneker Souza de
Adhesiveness
Textile sludge
Asphalt mixtures.
Adhesividad
Lodos textiles
Mezclas asfálticas.
Adesividade
Lodo têxtil
Misturas asfálticas.
title_short Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing
title_full Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing
title_fullStr Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing
title_full_unstemmed Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing
title_sort Evaluation of the adhesiveness of the asphalt binder modified with textile sludge by means of digital image processing
author Moura, Lyneker Souza de
author_facet Moura, Lyneker Souza de
Reis, Ana Carolina dos Santos
Silva, Carina Lessa
Bezerra , João Pedro Santana
Nóbrega, Ana Cecília Vieira da
Carneiro , Arnaldo Manoel Pereira
author_role author
author2 Reis, Ana Carolina dos Santos
Silva, Carina Lessa
Bezerra , João Pedro Santana
Nóbrega, Ana Cecília Vieira da
Carneiro , Arnaldo Manoel Pereira
author2_role author
author
author
author
author
dc.contributor.author.fl_str_mv Moura, Lyneker Souza de
Reis, Ana Carolina dos Santos
Silva, Carina Lessa
Bezerra , João Pedro Santana
Nóbrega, Ana Cecília Vieira da
Carneiro , Arnaldo Manoel Pereira
dc.subject.por.fl_str_mv Adhesiveness
Textile sludge
Asphalt mixtures.
Adhesividad
Lodos textiles
Mezclas asfálticas.
Adesividade
Lodo têxtil
Misturas asfálticas.
topic Adhesiveness
Textile sludge
Asphalt mixtures.
Adhesividad
Lodos textiles
Mezclas asfálticas.
Adesividade
Lodo têxtil
Misturas asfálticas.
description Adhesiveness is an important quality indicator for asphalt mixtures of rolling layers in pavements. Frequent consequences of poor adhesion of the binder to aggregate are slippage and disintegration, as well as reduced durability. Thus, it is necessary to evaluate and fully understand this phenomenon. In the present research, different approaches were used in order to analyze the adhesiveness when there is incorporation of textile sludge, a polluting industrial residue also coming from textile laundries located at the Confeste do APL of Agreste Pernambucano, to asphalt matrices. The sludge was added directly to the adherent material in contents of 2.0 and 3.0% in relation to the total mass of the mixture, and these samples were compared, by means of adhesiveness, to the reference, without sludge. The adhesiveness was analyzed qualitatively by conventional adhesion test described by Brazilian standard DNIT ME 078/1994. The aggregate area covered by ligand was calculated by means of digital image processing and the mixture surface interface was analyzed by microscopy petrographic. The results showed that the insertion of sludge in the mixture does not affect the adhesion of the mixture, since the three samples did not present pickling of the film and the area covered by binder was 100%. Petrographic microscopy showed that the mastic film (binder and textile sludge) penetrated even smaller void pores, this result demonstrates that the increase in viscosity did not harm the spreading on the aggregate surface and that asphalt matrices can be a good form of imprisonment of the studied waste.
publishDate 2021
dc.date.none.fl_str_mv 2021-04-02
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/13975
10.33448/rsd-v10i4.13975
url https://rsdjournal.org/index.php/rsd/article/view/13975
identifier_str_mv 10.33448/rsd-v10i4.13975
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/13975/12488
dc.rights.driver.fl_str_mv https://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Research, Society and Development
publisher.none.fl_str_mv Research, Society and Development
dc.source.none.fl_str_mv Research, Society and Development; Vol. 10 No. 4; e12110413975
Research, Society and Development; Vol. 10 Núm. 4; e12110413975
Research, Society and Development; v. 10 n. 4; e12110413975
2525-3409
reponame:Research, Society and Development
instname:Universidade Federal de Itajubá (UNIFEI)
instacron:UNIFEI
instname_str Universidade Federal de Itajubá (UNIFEI)
instacron_str UNIFEI
institution UNIFEI
reponame_str Research, Society and Development
collection Research, Society and Development
repository.name.fl_str_mv Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)
repository.mail.fl_str_mv rsd.articles@gmail.com
_version_ 1797052747277664256