Tracking in product delivery using portable RFID with arduine
Autor(a) principal: | |
---|---|
Data de Publicação: | 2020 |
Outros Autores: | , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/9298 |
Resumo: | This study aimed to develop a device for traceability of the goods delivery process, using radio frequency technology (RFID), which will inform the date, time and location where the goods are being delivered to the end customer. The methodology used consisted of three stages: 1) data collection through a portable collector along with RFID tags, 2) data processing by the microcontroller and 3) carrying out the consultation of the information contained in the tag through the communication between the RFID and the Arduino, whose product traceability was carried out through radio frequency sending information via GSM; while the materials used were 1 mega arduino board, 1 6m Neo GPS shield, 1 Sim 900 module, 1 RC522 RFID reader, 1 16x2 graphic LCD display and 1 keychain RFID tag. For testing the sending of date, time, product specifications and location information via SMS to the registered cell phone at the time of product delivery, operations were carried out in different locations with different dates and times and the messages were sent without fail. The results confirmed the display of the information “Data Collected Successfully” on the LCD display, after the reading of the LCD label by the collector. The proposed prototype proved to be effective, managing to control the delivery of low-cost goods through passive tag on a portable RFID reader. |
id |
UNIFEI_567b0d389623fb7c48b092d7c6a48430 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/9298 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Tracking in product delivery using portable RFID with arduineSeguimiento de la entrega de productos mediante RFID portátil con arduinoRastreamento na entrega de produtos utilizando RFID portátil com arduinoPortable RFIDProduct trackingArduinoDelivery tracking.RFID portátilSeguimiento de productosArduinoSeguimiento de entregas.RFID portátilRastreamento de produtoArduínoRastreamento de entregas.This study aimed to develop a device for traceability of the goods delivery process, using radio frequency technology (RFID), which will inform the date, time and location where the goods are being delivered to the end customer. The methodology used consisted of three stages: 1) data collection through a portable collector along with RFID tags, 2) data processing by the microcontroller and 3) carrying out the consultation of the information contained in the tag through the communication between the RFID and the Arduino, whose product traceability was carried out through radio frequency sending information via GSM; while the materials used were 1 mega arduino board, 1 6m Neo GPS shield, 1 Sim 900 module, 1 RC522 RFID reader, 1 16x2 graphic LCD display and 1 keychain RFID tag. For testing the sending of date, time, product specifications and location information via SMS to the registered cell phone at the time of product delivery, operations were carried out in different locations with different dates and times and the messages were sent without fail. The results confirmed the display of the information “Data Collected Successfully” on the LCD display, after the reading of the LCD label by the collector. The proposed prototype proved to be effective, managing to control the delivery of low-cost goods through passive tag on a portable RFID reader.Este estudio tuvo como objetivo desarrollar un dispositivo para la trazabilidad del proceso de entrega de la mercancía, mediante tecnología de radiofrecuencia (RFID), que informará la fecha, hora y lugar donde se entrega la mercancía al cliente final. La metodología utilizada consistió en tres pasos: 1) recolección de datos a través de un colector portátil junto con etiquetas RFID, 2) procesamiento de datos por el microcontrolador y 3) realización de la consulta de la información contenida en el TAG a través de la comunicación entre el RFID y el Arduino , cuya trazabilidad de producto se realizó mediante envío de información por radiofrecuencia vía GSM; mientras que los materiales utilizados fueron 1 placa mega arduino, 1 escudo Neo GPS de 6m, 1 módulo Sim 900, 1 lector RFID RC522, 1 display LCD gráfico 16x2 y 1 llavero RFID TAG. Para probar el envío de fecha, hora, especificaciones del producto e información de ubicación vía SMS al celular registrado en el momento de la entrega del producto, se realizaron operaciones en diferentes ubicaciones con diferentes fechas y horas y los mensajes se enviaron sin falta. Los resultados confirmaron la visualización de la información "Datos recopilados con éxito" en la pantalla LCD, después de la lectura de la etiqueta LCD por parte del recolector. El prototipo propuesto demostró ser efectivo, logrando controlar la entrega de mercancías de bajo costo a través de etiquetas TAG pasivas en un lector RFID portátil.Este estudo teve como objetivo desenvolver um dispositivo para rastreabilidade do processo de entrega de mercadoria, através da tecnologia de rádio frequência (RFID), o qual informará a data, hora e localização onde a mercadoria está sendo entregue ao cliente final. A metodologia utilizada consistiu de três etapas: 1) coleta dos dados através de coletor portátil junto as etiquetas RFID, 2) processamento dos dados pelo microcontrolador e 3) realização da consulta das informações contidas no TAG por meio da comunicação entre o RFID e o Arduino, cuja rastreabilidade do produto foi realizada através de rádio frequência enviando informação via GSM; enquanto que os materiais utilizados foram 1 placa de arduíno mega, 1 shield GPS Neo 6m, 1 módulo Sim 900, 1 leitor RFID RC522, 1 display de LCD gráfico 16x2 e 1 TAG RFID do tipo chaveiro. Para os testes do envio de informações de data, hora, especificações do produto e localização via SMS para o celular cadastrado no momento da entrega do produto, foram realizadas operações em diversos locais com datas e horas diferentes e as mensagens foram enviadas sem falha. Os resultados constataram a exibição da informação “Dados Coletados com Sucesso” no display de LCD, após a realização da leitura da etiqueta de LCD pelo coletor. O protótipo proposto se mostrou eficaz, conseguindo realizar o controle de entrega de mercadorias de baixo de custo por meio de etiquetas passivas em um leitor portátil RFID.Research, Society and Development2020-10-17info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/929810.33448/rsd-v9i10.9298Research, Society and Development; Vol. 9 No. 10; e7529109298Research, Society and Development; Vol. 9 Núm. 10; e7529109298Research, Society and Development; v. 9 n. 10; e75291092982525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIenghttps://rsdjournal.org/index.php/rsd/article/view/9298/8164Copyright (c) 2020 Laio Souza Pontes de Carvalho; José Fábio de Lima Nascimento; Daniel Nascimento-e-Silvahttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessCarvalho, Laio Souza Pontes de Nascimento, José Fábio de Lima Nascimento-e-Silva, Daniel2020-10-31T12:03:23Zoai:ojs.pkp.sfu.ca:article/9298Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:31:37.205953Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Tracking in product delivery using portable RFID with arduine Seguimiento de la entrega de productos mediante RFID portátil con arduino Rastreamento na entrega de produtos utilizando RFID portátil com arduino |
title |
Tracking in product delivery using portable RFID with arduine |
spellingShingle |
Tracking in product delivery using portable RFID with arduine Carvalho, Laio Souza Pontes de Portable RFID Product tracking Arduino Delivery tracking. RFID portátil Seguimiento de productos Arduino Seguimiento de entregas. RFID portátil Rastreamento de produto Arduíno Rastreamento de entregas. |
title_short |
Tracking in product delivery using portable RFID with arduine |
title_full |
Tracking in product delivery using portable RFID with arduine |
title_fullStr |
Tracking in product delivery using portable RFID with arduine |
title_full_unstemmed |
Tracking in product delivery using portable RFID with arduine |
title_sort |
Tracking in product delivery using portable RFID with arduine |
author |
Carvalho, Laio Souza Pontes de |
author_facet |
Carvalho, Laio Souza Pontes de Nascimento, José Fábio de Lima Nascimento-e-Silva, Daniel |
author_role |
author |
author2 |
Nascimento, José Fábio de Lima Nascimento-e-Silva, Daniel |
author2_role |
author author |
dc.contributor.author.fl_str_mv |
Carvalho, Laio Souza Pontes de Nascimento, José Fábio de Lima Nascimento-e-Silva, Daniel |
dc.subject.por.fl_str_mv |
Portable RFID Product tracking Arduino Delivery tracking. RFID portátil Seguimiento de productos Arduino Seguimiento de entregas. RFID portátil Rastreamento de produto Arduíno Rastreamento de entregas. |
topic |
Portable RFID Product tracking Arduino Delivery tracking. RFID portátil Seguimiento de productos Arduino Seguimiento de entregas. RFID portátil Rastreamento de produto Arduíno Rastreamento de entregas. |
description |
This study aimed to develop a device for traceability of the goods delivery process, using radio frequency technology (RFID), which will inform the date, time and location where the goods are being delivered to the end customer. The methodology used consisted of three stages: 1) data collection through a portable collector along with RFID tags, 2) data processing by the microcontroller and 3) carrying out the consultation of the information contained in the tag through the communication between the RFID and the Arduino, whose product traceability was carried out through radio frequency sending information via GSM; while the materials used were 1 mega arduino board, 1 6m Neo GPS shield, 1 Sim 900 module, 1 RC522 RFID reader, 1 16x2 graphic LCD display and 1 keychain RFID tag. For testing the sending of date, time, product specifications and location information via SMS to the registered cell phone at the time of product delivery, operations were carried out in different locations with different dates and times and the messages were sent without fail. The results confirmed the display of the information “Data Collected Successfully” on the LCD display, after the reading of the LCD label by the collector. The proposed prototype proved to be effective, managing to control the delivery of low-cost goods through passive tag on a portable RFID reader. |
publishDate |
2020 |
dc.date.none.fl_str_mv |
2020-10-17 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/9298 10.33448/rsd-v9i10.9298 |
url |
https://rsdjournal.org/index.php/rsd/article/view/9298 |
identifier_str_mv |
10.33448/rsd-v9i10.9298 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/9298/8164 |
dc.rights.driver.fl_str_mv |
https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 9 No. 10; e7529109298 Research, Society and Development; Vol. 9 Núm. 10; e7529109298 Research, Society and Development; v. 9 n. 10; e7529109298 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052661967618048 |