The problems caused by the lack of project compatibility in the executive process of a metallic structure

Detalhes bibliográficos
Autor(a) principal: Lima, Jardel Santos
Data de Publicação: 2022
Outros Autores: Paixão , Mariana Gonçalves da, Ferreira, Diego Silva
Tipo de documento: Artigo
Idioma: por
Título da fonte: Research, Society and Development
Texto Completo: https://rsdjournal.org/index.php/rsd/article/view/31130
Resumo: Compatibility aims to unify projects in a work, facilitating execution, mitigating structural changes that occur during construction, reducing maintenance costs and constructive difficulties that may appear in progress, in addition to maintaining final customer satisfaction. When analyzing the failures caused by the lack of compatibility, ways are imagined to reverse the problems obtained when the work is in progress, however, when dealing with a metallic structure, there are more adversities in the process - since these do not allow many adaptations in its primary structure (columns and beams) as a result of its dimensioning being all planned with its locations and load capacities already predetermined, making it difficult, but not impossible, any type of alteration in the execution. Thus, this research aims to analyze the problems caused in executive processes of metallic structures when their projects are not compatible, characterized and exemplified with cases found in buildings. The methodology is qualitative, an analysis through a case study made with a single metallic building. Among the results, problems were identified due to changes in the architecture and details requested by the owner when the assembly process was already in progress, in addition to the lack of compatibility between the projects that caused rework, time and additional resources to the construction. Concluding, therefore, that the execution process should only be started when the projects are defined, with all the compatibilizations between them duly carried out.
id UNIFEI_772785ced463c555c2a86746979c8d79
oai_identifier_str oai:ojs.pkp.sfu.ca:article/31130
network_acronym_str UNIFEI
network_name_str Research, Society and Development
repository_id_str
spelling The problems caused by the lack of project compatibility in the executive process of a metallic structureLos problemas causados por la falta de compatibilidad proyecto en el proceso ejecutivo de una estructura metálicaOs problemas causados pela falta de compatibilização de projetos no processo executivo de uma estrutura metálicaProjetosCompatibilizaçãoEstrutura metálicaBIM.ProjectsCompatibilityMetal structureBIM.ProyectosCompatibilidadEstructura metálicaBIM.Compatibility aims to unify projects in a work, facilitating execution, mitigating structural changes that occur during construction, reducing maintenance costs and constructive difficulties that may appear in progress, in addition to maintaining final customer satisfaction. When analyzing the failures caused by the lack of compatibility, ways are imagined to reverse the problems obtained when the work is in progress, however, when dealing with a metallic structure, there are more adversities in the process - since these do not allow many adaptations in its primary structure (columns and beams) as a result of its dimensioning being all planned with its locations and load capacities already predetermined, making it difficult, but not impossible, any type of alteration in the execution. Thus, this research aims to analyze the problems caused in executive processes of metallic structures when their projects are not compatible, characterized and exemplified with cases found in buildings. The methodology is qualitative, an analysis through a case study made with a single metallic building. Among the results, problems were identified due to changes in the architecture and details requested by the owner when the assembly process was already in progress, in addition to the lack of compatibility between the projects that caused rework, time and additional resources to the construction. Concluding, therefore, that the execution process should only be started when the projects are defined, with all the compatibilizations between them duly carried out.La compatibilidad tiene como objetivo unificar los proyectos en una obra, facilitando la ejecución, mitigando los cambios estructurales que se producen durante la construcción, reduciendo los costes de mantenimiento y las dificultades constructivas que puedan aparecer en la ejecución, además de mantener la satisfacción del cliente final. Al analizar las fallas provocadas por la falta de compatibilidad, se imaginan formas de revertir los problemas obtenidos cuando la obra está en ejecución, sin embargo, al tratarse de una estructura metálica, se presentan más adversidades en el proceso - ya que estas no permiten muchas adaptaciones en su estructura primaria (columnas y vigas) como consecuencia de que su dimensionamiento está todo previsto con sus ubicaciones y capacidades de carga ya predeterminadas, dificultando, pero no imposibilitando, cualquier tipo de alteración en la ejecución. Así, esta investigación tiene como objetivo analizar los problemas ocasionados en los procesos ejecutivos de estructuras metálicas cuando sus proyectos no son compatibles, caracterizados y ejemplificados con casos encontrados en edificaciones. La metodología es cualitativa, un análisis a través de un estudio de caso realizado con un solo edificio metálico. Entre los resultados se identificaron problemas por cambios en la arquitectura y detalles solicitados por el propietario cuando el proceso de montaje ya estaba en marcha, además de la falta de compatibilidad entre los proyectos que ocasionó retrabajo, tiempo y recursos adicionales a la construcción. Concluyendo, por tanto, que el proceso de ejecución sólo debe iniciarse cuando los proyectos estén definidos, con todas las compatibilizaciones entre ellos debidamente realizadas.A compatibilização tem a finalidade de unificar projetos em uma obra, facilitando a execução, amenizando as alterações estruturais que ocorrem no decorrer da construção, reduzindo custos com manutenção e dificuldades construtivas que podem aparecer no andamento, além de manter a satisfação final do cliente. Ao analisar as falhas causadas pela falta de compatibilização, imaginam-se maneiras para reverter os problemas obtidos quando a obra encontra-se em andamento, porém ao se tratar de uma estrutura metálica encontram-se mais adversidades no processo - já que estas não permitem muitas adaptações em sua estrutura primária (pilares e vigas) em decorrência de seu dimensionamento ser todo planejado com suas locações e capacidades de carga já predeterminadas, dificultando, mas não impossibilitando qualquer tipo de alteração na execução. Assim, esta pesquisa tem como objetivo analisar os problemas causados em processos executivos de estruturas metálicas quando seus projetos não são compatibilizados, caracterizado e exemplificando com casos encontrados em edifícios. A metodologia é qualitativa, uma análise por meio de estudo de caso feito com uma única edificação metálica. Dentre os resultados, foram identificados problemas devido às mudanças na arquitetura e detalhamentos solicitados pelo proprietário quando o processo de montagem já estava em andamento, além da falta de compatibilização entre os projetos que provocaram retrabalhos, tempo e recursos adicionais à construção. Concluindo, assim, que o processo de execução só deve ser iniciado quando forem definidos os projetos, com todas as compatibilizações entre eles devidamente realizadas.Research, Society and Development2022-06-26info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/3113010.33448/rsd-v11i8.31130Research, Society and Development; Vol. 11 No. 8; e46711831130Research, Society and Development; Vol. 11 Núm. 8; e46711831130Research, Society and Development; v. 11 n. 8; e467118311302525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIporhttps://rsdjournal.org/index.php/rsd/article/view/31130/26694Copyright (c) 2022 Jardel Santos Lima; Mariana Gonçalves da Paixão ; Diego Silva Ferreirahttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessLima, Jardel Santos Paixão , Mariana Gonçalves da Ferreira, Diego Silva 2022-07-01T13:34:06Zoai:ojs.pkp.sfu.ca:article/31130Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:47:35.698519Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false
dc.title.none.fl_str_mv The problems caused by the lack of project compatibility in the executive process of a metallic structure
Los problemas causados por la falta de compatibilidad proyecto en el proceso ejecutivo de una estructura metálica
Os problemas causados pela falta de compatibilização de projetos no processo executivo de uma estrutura metálica
title The problems caused by the lack of project compatibility in the executive process of a metallic structure
spellingShingle The problems caused by the lack of project compatibility in the executive process of a metallic structure
Lima, Jardel Santos
Projetos
Compatibilização
Estrutura metálica
BIM.
Projects
Compatibility
Metal structure
BIM.
Proyectos
Compatibilidad
Estructura metálica
BIM.
title_short The problems caused by the lack of project compatibility in the executive process of a metallic structure
title_full The problems caused by the lack of project compatibility in the executive process of a metallic structure
title_fullStr The problems caused by the lack of project compatibility in the executive process of a metallic structure
title_full_unstemmed The problems caused by the lack of project compatibility in the executive process of a metallic structure
title_sort The problems caused by the lack of project compatibility in the executive process of a metallic structure
author Lima, Jardel Santos
author_facet Lima, Jardel Santos
Paixão , Mariana Gonçalves da
Ferreira, Diego Silva
author_role author
author2 Paixão , Mariana Gonçalves da
Ferreira, Diego Silva
author2_role author
author
dc.contributor.author.fl_str_mv Lima, Jardel Santos
Paixão , Mariana Gonçalves da
Ferreira, Diego Silva
dc.subject.por.fl_str_mv Projetos
Compatibilização
Estrutura metálica
BIM.
Projects
Compatibility
Metal structure
BIM.
Proyectos
Compatibilidad
Estructura metálica
BIM.
topic Projetos
Compatibilização
Estrutura metálica
BIM.
Projects
Compatibility
Metal structure
BIM.
Proyectos
Compatibilidad
Estructura metálica
BIM.
description Compatibility aims to unify projects in a work, facilitating execution, mitigating structural changes that occur during construction, reducing maintenance costs and constructive difficulties that may appear in progress, in addition to maintaining final customer satisfaction. When analyzing the failures caused by the lack of compatibility, ways are imagined to reverse the problems obtained when the work is in progress, however, when dealing with a metallic structure, there are more adversities in the process - since these do not allow many adaptations in its primary structure (columns and beams) as a result of its dimensioning being all planned with its locations and load capacities already predetermined, making it difficult, but not impossible, any type of alteration in the execution. Thus, this research aims to analyze the problems caused in executive processes of metallic structures when their projects are not compatible, characterized and exemplified with cases found in buildings. The methodology is qualitative, an analysis through a case study made with a single metallic building. Among the results, problems were identified due to changes in the architecture and details requested by the owner when the assembly process was already in progress, in addition to the lack of compatibility between the projects that caused rework, time and additional resources to the construction. Concluding, therefore, that the execution process should only be started when the projects are defined, with all the compatibilizations between them duly carried out.
publishDate 2022
dc.date.none.fl_str_mv 2022-06-26
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/31130
10.33448/rsd-v11i8.31130
url https://rsdjournal.org/index.php/rsd/article/view/31130
identifier_str_mv 10.33448/rsd-v11i8.31130
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/31130/26694
dc.rights.driver.fl_str_mv Copyright (c) 2022 Jardel Santos Lima; Mariana Gonçalves da Paixão ; Diego Silva Ferreira
https://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2022 Jardel Santos Lima; Mariana Gonçalves da Paixão ; Diego Silva Ferreira
https://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Research, Society and Development
publisher.none.fl_str_mv Research, Society and Development
dc.source.none.fl_str_mv Research, Society and Development; Vol. 11 No. 8; e46711831130
Research, Society and Development; Vol. 11 Núm. 8; e46711831130
Research, Society and Development; v. 11 n. 8; e46711831130
2525-3409
reponame:Research, Society and Development
instname:Universidade Federal de Itajubá (UNIFEI)
instacron:UNIFEI
instname_str Universidade Federal de Itajubá (UNIFEI)
instacron_str UNIFEI
institution UNIFEI
reponame_str Research, Society and Development
collection Research, Society and Development
repository.name.fl_str_mv Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)
repository.mail.fl_str_mv rsd.articles@gmail.com
_version_ 1797052767871696896

Registros relacionados