Digital workflow effectiveness: preliminary results
Autor(a) principal: | |
---|---|
Data de Publicação: | 2022 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/30598 |
Resumo: | Objective: The aim of this observational study was to evaluate the effectiveness of the complete digital workflow in the manufacture of implant-supported screw-retained prostheses regarding to their passive fitting. Materials and Methods: This study presents a preliminary result, part of the project approved by the Ethics Committee of Centro Universitário José Campos Andrade (UNIANDRADE) under number 3,367,320. The sample consisted of 9 patients who had partially edentulous areas with 2 to 3 healed implants, selected at clinic of Faculdade Ilapeo according to the inclusion criteria. All were rehabilitated with metal ceramics multiple implant-supported screw-retained partial dentures. The abutments were selected according to the characteristics of the peri-implant tissues. The frameworks were milled in cobalt-chrome and veneered. The passive fitting of infrastructure was used as a criterion for evaluating the effectiveness of the complete digital workflow through the Sheffield Test criteria. Printed models were used to apply the veneering ceramics. Results: This preliminary result presents 14 implant-supported screw-type fixed prostheses, installed in nine patients. All infrastructures showed a positive result according to the evaluation criteria. Conclusions: Based on the preliminary results presented, it seems fair to conclude that the complete digital workflow shows the necessary effectiveness for obtaining metal ceramic multiple implant-supported screw-retained partial dentures, as a prevalence of prostheses that presented passive sfitting was observed. |
id |
UNIFEI_f8388ef127027ec7fcb89e1c6cae2bc4 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/30598 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Digital workflow effectiveness: preliminary results Eficacia del flujo de trabajo digital: resultados preliminaries Efetividade do fluxo de trabalho digital: resultados preliminares Prótese implanto-fixaScanner intraoralCAD CAM.Prótesis fija sobre implantesEscáner intraoralCAD CAM.Implant-fixed prosthesisIntraoral scannerCAD CAM.Objective: The aim of this observational study was to evaluate the effectiveness of the complete digital workflow in the manufacture of implant-supported screw-retained prostheses regarding to their passive fitting. Materials and Methods: This study presents a preliminary result, part of the project approved by the Ethics Committee of Centro Universitário José Campos Andrade (UNIANDRADE) under number 3,367,320. The sample consisted of 9 patients who had partially edentulous areas with 2 to 3 healed implants, selected at clinic of Faculdade Ilapeo according to the inclusion criteria. All were rehabilitated with metal ceramics multiple implant-supported screw-retained partial dentures. The abutments were selected according to the characteristics of the peri-implant tissues. The frameworks were milled in cobalt-chrome and veneered. The passive fitting of infrastructure was used as a criterion for evaluating the effectiveness of the complete digital workflow through the Sheffield Test criteria. Printed models were used to apply the veneering ceramics. Results: This preliminary result presents 14 implant-supported screw-type fixed prostheses, installed in nine patients. All infrastructures showed a positive result according to the evaluation criteria. Conclusions: Based on the preliminary results presented, it seems fair to conclude that the complete digital workflow shows the necessary effectiveness for obtaining metal ceramic multiple implant-supported screw-retained partial dentures, as a prevalence of prostheses that presented passive sfitting was observed.Objetivo: El objetivo de este estudio observacional fue evaluar la efectividad del flujo de trabajo digital completo en la fabricación de prótesis implantosoportadas atornilladas con respecto a su ajuste pasivo. Materiales y Métodos: Este estudio presenta un resultado preliminar, parte del proyecto aprobado por el Comité de Ética del Centro Universitário José Campos Andrade (UNIANDRADE) bajo el número 3.367.320. La muestra estuvo compuesta por 9 pacientes que tenían áreas parcialmente edéntulas con 2 a 3 implantes cicatrizados, seleccionados en la clínica de la Faculdade Ilapeo de acuerdo con los criterios de inclusión. Todos fueron rehabilitados con prótesis parciales múltiples atornilladas sobre implantes metalocerámicas. Los pilares se seleccionaron de acuerdo con las características de los tejidos periimplantarios. Las estructuras se fresaron en cromo-cobalto y se recubrieron. El ajuste pasivo de la infraestructura se utilizó como criterio para evaluar la eficacia del flujo de trabajo digital completo a través de los criterios de la prueba de Sheffield. Se utilizaron modelos impresos para aplicar la cerámica de recubrimiento. Resultados: Este resultado preliminar presenta 14 prótesis fijas tipo tornillo implantosoportadas, instaladas en nueve pacientes. Todas las infraestructuras mostraron un resultado positivo según los criterios de evaluación. Conclusiones: Con base en los resultados preliminares presentados, parece justo concluir que el flujo de trabajo digital completo muestra la efectividad necesaria para la obtención de prótesis parciales atornilladas implantosoportadas múltiples metal cerámicas, ya que se observó un predominio de prótesis que presentaron ajuste pasivo.Objetivo: O objetivo deste estudo observacional foi avaliar a eficácia do fluxo de trabalho digital completo na fabricação de próteses parafusadas implanto-suportadas em relação ao seu assentamento passivo. Materiais e Métodos: Este estudo apresenta um resultado preliminar, parte do projeto aprovado pelo Comitê de Ética do Centro Universitário José Campos Andrade (UNIANDRADE) sob o número 3.367.320. A amostra foi composta por 9 pacientes que apresentavam áreas edêntulas parciais com 2 a 3 implantes cicatrizados, selecionados no ambulatório da Faculdade Ilapeo conforme os critérios de inclusão. Todos foram reabilitados com próteses parciais múltiplas parafusadas implanto suportadas. Os pilares foram selecionados de acordo com as características dos tecidos peri implantares. As infraestruturas foram fresadas em cobalto-cromo e revestidas com cerâmica. O assentamento passivo das infraestruturas foi utilizado como critério de avaliação da eficácia do fluxo de trabalho digital completo através dos critérios do Teste de Sheffield. Modelos impressos foram utilizados para aplicação das cerâmicas de revestimento. Resultados: Este resultado preliminar apresenta 14 próteses fixas implanto suportadas tipo parafuso, instaladas em nove pacientes. Todas as infraestruturas apresentaram resultado positivo de acordo com os critérios de avaliação. Conclusões: Com base nos resultados preliminares apresentados, parece justo concluir que o fluxo de trabalho digital completo mostra a eficácia necessária para a obtenção de próteses parciais múltiplas implanto suportadas do tipo parafusadas revestidas por cerâmica, pois foi observada uma prevalência de próteses que apresentaram assentamento passivo.Research, Society and Development2022-06-11info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/3059810.33448/rsd-v11i8.30598Research, Society and Development; Vol. 11 No. 8; e9911830598Research, Society and Development; Vol. 11 Núm. 8; e9911830598Research, Society and Development; v. 11 n. 8; e99118305982525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIenghttps://rsdjournal.org/index.php/rsd/article/view/30598/26307Copyright (c) 2022 Adriana Traczinski; João Paulo Lavagnoli Manfrinato; Paulo Afonso Tassi Junior; Ivete Aparecida de Mattias Sartorihttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessTraczinski, AdrianaManfrinato, João Paulo Lavagnoli Tassi Junior, Paulo Afonso Sartori, Ivete Aparecida de Mattias 2022-07-01T13:34:06Zoai:ojs.pkp.sfu.ca:article/30598Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:47:18.005189Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Digital workflow effectiveness: preliminary results Eficacia del flujo de trabajo digital: resultados preliminaries Efetividade do fluxo de trabalho digital: resultados preliminares |
title |
Digital workflow effectiveness: preliminary results |
spellingShingle |
Digital workflow effectiveness: preliminary results Traczinski, Adriana Prótese implanto-fixa Scanner intraoral CAD CAM. Prótesis fija sobre implantes Escáner intraoral CAD CAM. Implant-fixed prosthesis Intraoral scanner CAD CAM. |
title_short |
Digital workflow effectiveness: preliminary results |
title_full |
Digital workflow effectiveness: preliminary results |
title_fullStr |
Digital workflow effectiveness: preliminary results |
title_full_unstemmed |
Digital workflow effectiveness: preliminary results |
title_sort |
Digital workflow effectiveness: preliminary results |
author |
Traczinski, Adriana |
author_facet |
Traczinski, Adriana Manfrinato, João Paulo Lavagnoli Tassi Junior, Paulo Afonso Sartori, Ivete Aparecida de Mattias |
author_role |
author |
author2 |
Manfrinato, João Paulo Lavagnoli Tassi Junior, Paulo Afonso Sartori, Ivete Aparecida de Mattias |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
Traczinski, Adriana Manfrinato, João Paulo Lavagnoli Tassi Junior, Paulo Afonso Sartori, Ivete Aparecida de Mattias |
dc.subject.por.fl_str_mv |
Prótese implanto-fixa Scanner intraoral CAD CAM. Prótesis fija sobre implantes Escáner intraoral CAD CAM. Implant-fixed prosthesis Intraoral scanner CAD CAM. |
topic |
Prótese implanto-fixa Scanner intraoral CAD CAM. Prótesis fija sobre implantes Escáner intraoral CAD CAM. Implant-fixed prosthesis Intraoral scanner CAD CAM. |
description |
Objective: The aim of this observational study was to evaluate the effectiveness of the complete digital workflow in the manufacture of implant-supported screw-retained prostheses regarding to their passive fitting. Materials and Methods: This study presents a preliminary result, part of the project approved by the Ethics Committee of Centro Universitário José Campos Andrade (UNIANDRADE) under number 3,367,320. The sample consisted of 9 patients who had partially edentulous areas with 2 to 3 healed implants, selected at clinic of Faculdade Ilapeo according to the inclusion criteria. All were rehabilitated with metal ceramics multiple implant-supported screw-retained partial dentures. The abutments were selected according to the characteristics of the peri-implant tissues. The frameworks were milled in cobalt-chrome and veneered. The passive fitting of infrastructure was used as a criterion for evaluating the effectiveness of the complete digital workflow through the Sheffield Test criteria. Printed models were used to apply the veneering ceramics. Results: This preliminary result presents 14 implant-supported screw-type fixed prostheses, installed in nine patients. All infrastructures showed a positive result according to the evaluation criteria. Conclusions: Based on the preliminary results presented, it seems fair to conclude that the complete digital workflow shows the necessary effectiveness for obtaining metal ceramic multiple implant-supported screw-retained partial dentures, as a prevalence of prostheses that presented passive sfitting was observed. |
publishDate |
2022 |
dc.date.none.fl_str_mv |
2022-06-11 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/30598 10.33448/rsd-v11i8.30598 |
url |
https://rsdjournal.org/index.php/rsd/article/view/30598 |
identifier_str_mv |
10.33448/rsd-v11i8.30598 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/30598/26307 |
dc.rights.driver.fl_str_mv |
https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 11 No. 8; e9911830598 Research, Society and Development; Vol. 11 Núm. 8; e9911830598 Research, Society and Development; v. 11 n. 8; e9911830598 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052767687147520 |