Microstructural characterization of ceramic artifacts made using the raku technique

Detalhes bibliográficos
Autor(a) principal: Machado Junior, Wilton Antônio
Data de Publicação: 2021
Outros Autores: Ranieri, Maria Gabriela Araujo, Ribeiro, Rosinei Batista, Rosa, Jorge Luiz, Mello, Adilson da Silva
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Research, Society and Development
Texto Completo: https://rsdjournal.org/index.php/rsd/article/view/17755
Resumo: This study was carried out at the atelier “Adamas”, located in the city of Cunha, in the state of São Paulo, Brazil. The objective is to characterize the physical and mechanical properties of ceramics made using the raku technique in the Adamas atelier. As a methodology, the specimens were submitted to the following tests: Scanning Electron     Microscopy (SEM), X-ray Energy Dispersion Spectroscopy (EDS), mass loss and linear shrinkage. It was observed that the specimens were mainly composed of silicon and aluminum, which is typical of ceramics made with kaolinitic clays, possessing a plastic behavior for molding and after firing refractory. Therefore, ceramic artifacts made through the raku technique have typical chemical and physical characteristics of clay ceramics, proper adhesion of the glaze even when there are crackles originated purposely from the process, which causes the artistic artifact appropriate characteristics for use and appreciation.
id UNIFEI_fa0f3b95814e3ca4baf57a470d4e954b
oai_identifier_str oai:ojs.pkp.sfu.ca:article/17755
network_acronym_str UNIFEI
network_name_str Research, Society and Development
repository_id_str
spelling Microstructural characterization of ceramic artifacts made using the raku techniqueCaracterización microestructural de artefactos cerámicos realizados mediante la técnica rakuCaracterização microestrutural de artefatos cerâmicos confeccionados com a técnica de rakuCaracterização cerâmicaArtefato cerâmicoTécnica raku.Caracterización cerámicaArtefacto cerámicoTécnica raku.Ceramic characterizationCeramic artifactRaku technique.This study was carried out at the atelier “Adamas”, located in the city of Cunha, in the state of São Paulo, Brazil. The objective is to characterize the physical and mechanical properties of ceramics made using the raku technique in the Adamas atelier. As a methodology, the specimens were submitted to the following tests: Scanning Electron     Microscopy (SEM), X-ray Energy Dispersion Spectroscopy (EDS), mass loss and linear shrinkage. It was observed that the specimens were mainly composed of silicon and aluminum, which is typical of ceramics made with kaolinitic clays, possessing a plastic behavior for molding and after firing refractory. Therefore, ceramic artifacts made through the raku technique have typical chemical and physical characteristics of clay ceramics, proper adhesion of the glaze even when there are crackles originated purposely from the process, which causes the artistic artifact appropriate characteristics for use and appreciation.Este estudio se llevó a cabo en el taller “Adamas”, ubicado en la ciudad de Cunha, en el estado de São Paulo, Brasil. El objetivo es caracterizar las propiedades físicas y mecánicas de las cerámicas elaboradas con la técnica del raku en el atelier Adamas. Como metodología, las muestras se sometieron a las siguientes pruebas: Microscopía electrónica de barrido (SEM), Espectroscopía de dispersión de energía de rayos X (EDS), pérdida de masa y contracción lineal. Se observó que las probetas estaban compuestas principalmente por silicio y aluminio, lo cual es típico de las cerámicas elaboradas con arcillas caoliníticas, que poseen un comportamiento plástico para el moldeado y refractario después de la cocción. Por lo tanto, los artefactos cerámicos elaborados mediante la técnica del raku tienen características químicas y físicas típicas de las cerámicas de arcilla, adherencia adecuada del esmalte incluso cuando hay crepitaciones originadas intencionalmente en el proceso, lo que provoca que el artefacto artístico tenga características adecuadas para su uso y apreciación.Este estudo foi realizado no atelier “Adamas”, localizado na cidade de Cunha, estado de São Paulo, Brasil. O objetivo é caracterizar as propriedades físicas e mecânicas das cerâmicas confeccionadas pela técnica do raku no ateliê da Adamas. Como metodologia, os corpos-de-prova foram submetidos aos seguintes ensaios: Microscopia Eletrônica de Varredura (MEV), Espectroscopia de Dispersão de Energia de Raios-X (EDS), perda de massa e retração linear. Observou-se que os corpos-de-prova eram compostos principalmente de silício e alumínio, o que é típico de cerâmicas confeccionadas com argilas cauliníticas, possuindo um comportamento plástico para moldagem e após queima refratária. Portanto, os artefatos cerâmicos confeccionados através da técnica do raku possuem características químicas e físicas típicas da cerâmica argilosa, aderência adequada do esmalte mesmo quando há estalos originados          propositalmente do processo, o que faz com que o artefato artístico tenha características adequadas para uso e apreciação.Research, Society and Development2021-07-21info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/1775510.33448/rsd-v10i9.17755Research, Society and Development; Vol. 10 No. 9; e6910917755Research, Society and Development; Vol. 10 Núm. 9; e6910917755Research, Society and Development; v. 10 n. 9; e69109177552525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIenghttps://rsdjournal.org/index.php/rsd/article/view/17755/15904Copyright (c) 2021 Wilton Antônio Machado Junior; Maria Gabriela Araujo Ranieri; Rosinei Batista Ribeiro; Jorge Luiz Rosa; Adilson da Silva Mellohttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessMachado Junior, Wilton AntônioRanieri, Maria Gabriela AraujoRibeiro, Rosinei Batista Rosa, Jorge LuizMello, Adilson da Silva 2021-09-12T14:28:06Zoai:ojs.pkp.sfu.ca:article/17755Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:38:02.274836Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false
dc.title.none.fl_str_mv Microstructural characterization of ceramic artifacts made using the raku technique
Caracterización microestructural de artefactos cerámicos realizados mediante la técnica raku
Caracterização microestrutural de artefatos cerâmicos confeccionados com a técnica de raku
title Microstructural characterization of ceramic artifacts made using the raku technique
spellingShingle Microstructural characterization of ceramic artifacts made using the raku technique
Machado Junior, Wilton Antônio
Caracterização cerâmica
Artefato cerâmico
Técnica raku.
Caracterización cerámica
Artefacto cerámico
Técnica raku.
Ceramic characterization
Ceramic artifact
Raku technique.
title_short Microstructural characterization of ceramic artifacts made using the raku technique
title_full Microstructural characterization of ceramic artifacts made using the raku technique
title_fullStr Microstructural characterization of ceramic artifacts made using the raku technique
title_full_unstemmed Microstructural characterization of ceramic artifacts made using the raku technique
title_sort Microstructural characterization of ceramic artifacts made using the raku technique
author Machado Junior, Wilton Antônio
author_facet Machado Junior, Wilton Antônio
Ranieri, Maria Gabriela Araujo
Ribeiro, Rosinei Batista
Rosa, Jorge Luiz
Mello, Adilson da Silva
author_role author
author2 Ranieri, Maria Gabriela Araujo
Ribeiro, Rosinei Batista
Rosa, Jorge Luiz
Mello, Adilson da Silva
author2_role author
author
author
author
dc.contributor.author.fl_str_mv Machado Junior, Wilton Antônio
Ranieri, Maria Gabriela Araujo
Ribeiro, Rosinei Batista
Rosa, Jorge Luiz
Mello, Adilson da Silva
dc.subject.por.fl_str_mv Caracterização cerâmica
Artefato cerâmico
Técnica raku.
Caracterización cerámica
Artefacto cerámico
Técnica raku.
Ceramic characterization
Ceramic artifact
Raku technique.
topic Caracterização cerâmica
Artefato cerâmico
Técnica raku.
Caracterización cerámica
Artefacto cerámico
Técnica raku.
Ceramic characterization
Ceramic artifact
Raku technique.
description This study was carried out at the atelier “Adamas”, located in the city of Cunha, in the state of São Paulo, Brazil. The objective is to characterize the physical and mechanical properties of ceramics made using the raku technique in the Adamas atelier. As a methodology, the specimens were submitted to the following tests: Scanning Electron     Microscopy (SEM), X-ray Energy Dispersion Spectroscopy (EDS), mass loss and linear shrinkage. It was observed that the specimens were mainly composed of silicon and aluminum, which is typical of ceramics made with kaolinitic clays, possessing a plastic behavior for molding and after firing refractory. Therefore, ceramic artifacts made through the raku technique have typical chemical and physical characteristics of clay ceramics, proper adhesion of the glaze even when there are crackles originated purposely from the process, which causes the artistic artifact appropriate characteristics for use and appreciation.
publishDate 2021
dc.date.none.fl_str_mv 2021-07-21
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/17755
10.33448/rsd-v10i9.17755
url https://rsdjournal.org/index.php/rsd/article/view/17755
identifier_str_mv 10.33448/rsd-v10i9.17755
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/17755/15904
dc.rights.driver.fl_str_mv https://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Research, Society and Development
publisher.none.fl_str_mv Research, Society and Development
dc.source.none.fl_str_mv Research, Society and Development; Vol. 10 No. 9; e6910917755
Research, Society and Development; Vol. 10 Núm. 9; e6910917755
Research, Society and Development; v. 10 n. 9; e6910917755
2525-3409
reponame:Research, Society and Development
instname:Universidade Federal de Itajubá (UNIFEI)
instacron:UNIFEI
instname_str Universidade Federal de Itajubá (UNIFEI)
instacron_str UNIFEI
institution UNIFEI
reponame_str Research, Society and Development
collection Research, Society and Development
repository.name.fl_str_mv Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)
repository.mail.fl_str_mv rsd.articles@gmail.com
_version_ 1797052752235331584

Registros relacionados