Análise numérica e experimental de geradores piezelétricos de energia
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações do UNIOESTE |
Texto Completo: | http://tede.unioeste.br:8080/tede/handle/tede/1089 |
Resumo: | The use of piezoelectric devices to harvest vibration energy has found applications in several areas, especially in structural health monitoring, either to recharge batteries or to directly feed sensors and also electronic devices. In general, the practical use of the energy converted by these devices requires, first, converting the alternating current (AC) produced to direct current (DC). This is normally done by using rectifier circuits. However, modeling the harvesting system, usually a PZT sensor bonded on a cantilever micro-beam and coupled to a rectifier circuit, using the same software package is pointed out by some authors as a drawback to overcome, due to its multidisciplinary requirements, involving topics of both mechanical and electrical engineering. In this sense, the main goal of this dissertation is to describe a comprehensive and simple modeling strategy, which considers a single computational platform and, simultaneously, account for both the electromechanical model of a clamped piezoelectric beam and the practical energy harvesting circuit, seeking ways to facilitate the analysis and design of energy harvesting systems. Numerical simulations and experimental tests are performed to illustrate the proposed approach, considering a full-wave diode bridge as the non-controlled rectifier circuit and a resistive load, which are directly connected to the cantilevered piezoelectric beam. Additionally, experimental tests carried out with a commercial harvesting system are presented, aiming to characterize and compare its performance with a full-wave diode bridge and a resistive circuit, both developed by the author. A single degree of freedom model of this system is also presented. The results showed that the model is suitable to perform simulations of systemshaving the characteristics described in this dissertation and confirmed the need of using active circuits to better use the produced energy. |
id |
UNIOESTE-1_80ece9ee23155913f7f4ca1b7d766473 |
---|---|
oai_identifier_str |
oai:tede.unioeste.br:tede/1089 |
network_acronym_str |
UNIOESTE-1 |
network_name_str |
Biblioteca Digital de Teses e Dissertações do UNIOESTE |
repository_id_str |
|
spelling |
Silva, Samuel daCPF:26693971822Reginatto, RomeuCPF:41893956091http://lattes.cnpq.br/9166033914580991Marqui Junior, Carlos deCPF:17878828881http://lattes.cnpq.br/5018715698946656CPF:04612536908http://lattes.cnpq.br/1914488602003123Clementino, Marcel Araujo2017-07-10T17:11:52Z2013-06-262013-03-01CLEMENTINO, Marcel Araujo. Análise numérica e experimental de geradores piezelétricos de energia. 2013. 99 f. Dissertação (Mestrado em Sistemas Dinâmicos e Energéticos) - Universidade Estadual do Oeste do Parana, Foz do Iguaçu, 2013.http://tede.unioeste.br:8080/tede/handle/tede/1089The use of piezoelectric devices to harvest vibration energy has found applications in several areas, especially in structural health monitoring, either to recharge batteries or to directly feed sensors and also electronic devices. In general, the practical use of the energy converted by these devices requires, first, converting the alternating current (AC) produced to direct current (DC). This is normally done by using rectifier circuits. However, modeling the harvesting system, usually a PZT sensor bonded on a cantilever micro-beam and coupled to a rectifier circuit, using the same software package is pointed out by some authors as a drawback to overcome, due to its multidisciplinary requirements, involving topics of both mechanical and electrical engineering. In this sense, the main goal of this dissertation is to describe a comprehensive and simple modeling strategy, which considers a single computational platform and, simultaneously, account for both the electromechanical model of a clamped piezoelectric beam and the practical energy harvesting circuit, seeking ways to facilitate the analysis and design of energy harvesting systems. Numerical simulations and experimental tests are performed to illustrate the proposed approach, considering a full-wave diode bridge as the non-controlled rectifier circuit and a resistive load, which are directly connected to the cantilevered piezoelectric beam. Additionally, experimental tests carried out with a commercial harvesting system are presented, aiming to characterize and compare its performance with a full-wave diode bridge and a resistive circuit, both developed by the author. A single degree of freedom model of this system is also presented. The results showed that the model is suitable to perform simulations of systemshaving the characteristics described in this dissertation and confirmed the need of using active circuits to better use the produced energy.A utilização de dispositivos piezelétricos para reaproveitamento de energia vibratória tem en- contrado aplicações em várias áreas, sobretudo em monitoramento de integridade estrutural, seja para recarregar baterias ou alimentar diretamente sensores e outros dispositivos eletrôni- cos. Em geral, o uso prático da energia convertida por estes transdutores requer, primeiramente, a transformação da corrente alternada (CA) produzida em corrente contínua (CC). Isto é fre- quentemente obtido por meio da utilização de circuitos retificadores. Entretanto, utilizar o mesmo pacote de software para modelar sistemas de energy harvesting, geralmente compostos por um sensor piezelétrico acoplado em uma microviga e conectados a um circuito retificador, é apontado por alguns autores como um grande desafio a ser superado, pois necessita de requisi- tos multidisciplinares que incluem tópicos de engenharia elétrica e mecânica. Neste sentido, o principal objetivo deste trabalho é apresentar uma estratégia de modelagem simples, que utilize apenas uma plataforma computacional e considere, simultaneamente, os modelos de uma viga piezelétrica e um circuito prático de extração/armazenamento de energia, buscando meios de facilitar a análise e o projeto de sistemas de energy harvesting. Simulações numéricas e testes experimentais são realizados para ilustrar a abordagem proposta, considerando um circuito retificador de onda completa e uma carga resistiva conectados diretamente a uma viga piezelétrica sob condição engastada-livre. Além disso, são apresentados testes experimentais realizados com um sistema comercial de energy harvesting visando caracterizar e comparar seu desempenho frente aos circuitos retificadores de onda completa e resistivo, ambos confeccionados pelo autor. Um modelo de um grau de liberdade deste sistema também é apresentado. Os resultados mostraram que o modelo é adequado para realizar simulações de sistemas que possuam as características descritas neste trabalho e comprovaram a necessidade de se utilizar um circuito ativo para se ter um melhor reaproveitamento da energia gerada.Made available in DSpace on 2017-07-10T17:11:52Z (GMT). No. of bitstreams: 1 dissert Final Marcel Araujo.pdf: 10392408 bytes, checksum: 3344b21a2f98d64347dd0aea895a4444 (MD5) Previous issue date: 2013-03-01application/pdfpor8774263440366006536500Universidade Estadual do Oeste do ParanaFoz do IguaçuPrograma de Pós-Graduação em Engenharia de Sistemas Dinâmicos e EnergéticosUNIOESTEBRCentro de Engenharias e Ciências Exatasenergy harvestingeletrônica de potênciaestruturas inteligentesabordagem unificadaenergy harvestingpower electronicssmart structuresunified approachENGENHARIAS:ENGENHARIA MECANICAAnálise numérica e experimental de geradores piezelétricos de energiaNumerical and experimental analysis of piezoelectric energy harvestersinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do UNIOESTEinstname:Universidade Estadual do Oeste do Paraná (UNIOESTE)instacron:UNIOESTEORIGINALMarcel_Clementino_2013.pdfapplication/pdf10392408http://tede.unioeste.br:8080/tede/bitstream/tede/1089/1/Marcel_Clementino_2013.pdf3344b21a2f98d64347dd0aea895a4444MD51tede/10892017-09-05 15:07:58.976oai:tede.unioeste.br:tede/1089Biblioteca Digital de Teses e Dissertaçõeshttp://tede.unioeste.br/PUBhttp://tede.unioeste.br/oai/requestbiblioteca.repositorio@unioeste.bropendoar:2017-09-05T18:07:58Biblioteca Digital de Teses e Dissertações do UNIOESTE - Universidade Estadual do Oeste do Paraná (UNIOESTE)false |
dc.title.por.fl_str_mv |
Análise numérica e experimental de geradores piezelétricos de energia |
dc.title.alternative.eng.fl_str_mv |
Numerical and experimental analysis of piezoelectric energy harvesters |
title |
Análise numérica e experimental de geradores piezelétricos de energia |
spellingShingle |
Análise numérica e experimental de geradores piezelétricos de energia Clementino, Marcel Araujo energy harvesting eletrônica de potência estruturas inteligentes abordagem unificada energy harvesting power electronics smart structures unified approach ENGENHARIAS:ENGENHARIA MECANICA |
title_short |
Análise numérica e experimental de geradores piezelétricos de energia |
title_full |
Análise numérica e experimental de geradores piezelétricos de energia |
title_fullStr |
Análise numérica e experimental de geradores piezelétricos de energia |
title_full_unstemmed |
Análise numérica e experimental de geradores piezelétricos de energia |
title_sort |
Análise numérica e experimental de geradores piezelétricos de energia |
author |
Clementino, Marcel Araujo |
author_facet |
Clementino, Marcel Araujo |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Silva, Samuel da |
dc.contributor.advisor1ID.fl_str_mv |
CPF:26693971822 |
dc.contributor.referee1.fl_str_mv |
Reginatto, Romeu |
dc.contributor.referee1ID.fl_str_mv |
CPF:41893956091 |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/9166033914580991 |
dc.contributor.referee2.fl_str_mv |
Marqui Junior, Carlos de |
dc.contributor.referee2ID.fl_str_mv |
CPF:17878828881 |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/5018715698946656 |
dc.contributor.authorID.fl_str_mv |
CPF:04612536908 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/1914488602003123 |
dc.contributor.author.fl_str_mv |
Clementino, Marcel Araujo |
contributor_str_mv |
Silva, Samuel da Reginatto, Romeu Marqui Junior, Carlos de |
dc.subject.por.fl_str_mv |
energy harvesting eletrônica de potência estruturas inteligentes abordagem unificada |
topic |
energy harvesting eletrônica de potência estruturas inteligentes abordagem unificada energy harvesting power electronics smart structures unified approach ENGENHARIAS:ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
energy harvesting power electronics smart structures unified approach |
dc.subject.cnpq.fl_str_mv |
ENGENHARIAS:ENGENHARIA MECANICA |
description |
The use of piezoelectric devices to harvest vibration energy has found applications in several areas, especially in structural health monitoring, either to recharge batteries or to directly feed sensors and also electronic devices. In general, the practical use of the energy converted by these devices requires, first, converting the alternating current (AC) produced to direct current (DC). This is normally done by using rectifier circuits. However, modeling the harvesting system, usually a PZT sensor bonded on a cantilever micro-beam and coupled to a rectifier circuit, using the same software package is pointed out by some authors as a drawback to overcome, due to its multidisciplinary requirements, involving topics of both mechanical and electrical engineering. In this sense, the main goal of this dissertation is to describe a comprehensive and simple modeling strategy, which considers a single computational platform and, simultaneously, account for both the electromechanical model of a clamped piezoelectric beam and the practical energy harvesting circuit, seeking ways to facilitate the analysis and design of energy harvesting systems. Numerical simulations and experimental tests are performed to illustrate the proposed approach, considering a full-wave diode bridge as the non-controlled rectifier circuit and a resistive load, which are directly connected to the cantilevered piezoelectric beam. Additionally, experimental tests carried out with a commercial harvesting system are presented, aiming to characterize and compare its performance with a full-wave diode bridge and a resistive circuit, both developed by the author. A single degree of freedom model of this system is also presented. The results showed that the model is suitable to perform simulations of systemshaving the characteristics described in this dissertation and confirmed the need of using active circuits to better use the produced energy. |
publishDate |
2013 |
dc.date.available.fl_str_mv |
2013-06-26 |
dc.date.issued.fl_str_mv |
2013-03-01 |
dc.date.accessioned.fl_str_mv |
2017-07-10T17:11:52Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
CLEMENTINO, Marcel Araujo. Análise numérica e experimental de geradores piezelétricos de energia. 2013. 99 f. Dissertação (Mestrado em Sistemas Dinâmicos e Energéticos) - Universidade Estadual do Oeste do Parana, Foz do Iguaçu, 2013. |
dc.identifier.uri.fl_str_mv |
http://tede.unioeste.br:8080/tede/handle/tede/1089 |
identifier_str_mv |
CLEMENTINO, Marcel Araujo. Análise numérica e experimental de geradores piezelétricos de energia. 2013. 99 f. Dissertação (Mestrado em Sistemas Dinâmicos e Energéticos) - Universidade Estadual do Oeste do Parana, Foz do Iguaçu, 2013. |
url |
http://tede.unioeste.br:8080/tede/handle/tede/1089 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual do Oeste do Parana Foz do Iguaçu |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia de Sistemas Dinâmicos e Energéticos |
dc.publisher.initials.fl_str_mv |
UNIOESTE |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro de Engenharias e Ciências Exatas |
publisher.none.fl_str_mv |
Universidade Estadual do Oeste do Parana Foz do Iguaçu |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações do UNIOESTE instname:Universidade Estadual do Oeste do Paraná (UNIOESTE) instacron:UNIOESTE |
instname_str |
Universidade Estadual do Oeste do Paraná (UNIOESTE) |
instacron_str |
UNIOESTE |
institution |
UNIOESTE |
reponame_str |
Biblioteca Digital de Teses e Dissertações do UNIOESTE |
collection |
Biblioteca Digital de Teses e Dissertações do UNIOESTE |
bitstream.url.fl_str_mv |
http://tede.unioeste.br:8080/tede/bitstream/tede/1089/1/Marcel_Clementino_2013.pdf |
bitstream.checksum.fl_str_mv |
3344b21a2f98d64347dd0aea895a4444 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações do UNIOESTE - Universidade Estadual do Oeste do Paraná (UNIOESTE) |
repository.mail.fl_str_mv |
biblioteca.repositorio@unioeste.br |
_version_ |
1801124519953301504 |