Screen printed barium titanate thick films prepared from mechanically activated powders

Detalhes bibliográficos
Autor(a) principal: Stojanovic, B. D. [UNESP]
Data de Publicação: 2001
Outros Autores: Foschini, C. R. [UNESP], Pejovic, V. Z. [UNESP], Pavlovic, V. B. [UNESP], Pavlovic, V. P. [UNESP], Varela, José Arana [UNESP]
Tipo de documento: Artigo de conferência
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.4028/www.scientific.net/KEM.206-213.1425
http://hdl.handle.net/11449/66612
Resumo: Barium titanate thick films were prepared from mechanically activated powders based on BaCO 3 and TiO 2. The thick films were screen-printed on alumina substrates electroded with Ag/Pd. The BT films were sintered at 850°C for 1 hour. The thickness was 30-75 μm depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate was investigated by SEM. The dielectric properties were measured and the results were reported.
id UNSP_21a4388221bdd2e5def6f7f94d4260bd
oai_identifier_str oai:repositorio.unesp.br:11449/66612
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Screen printed barium titanate thick films prepared from mechanically activated powdersBarium titanateMicrostructurePropertiesScreen-printedThick filmsMechanically activated powdersDielectric filmsPermittivity measurementPowdersScanning electron microscopyScreen printingBarium titanate thick films were prepared from mechanically activated powders based on BaCO 3 and TiO 2. The thick films were screen-printed on alumina substrates electroded with Ag/Pd. The BT films were sintered at 850°C for 1 hour. The thickness was 30-75 μm depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate was investigated by SEM. The dielectric properties were measured and the results were reported.Instituto de Quimica Universidade Estadual Paulista UNESP, Sao PaoloInstituto de Quimica Universidade Estadual Paulista UNESP, Sao PaoloUniversidade Estadual Paulista (Unesp)Stojanovic, B. D. [UNESP]Foschini, C. R. [UNESP]Pejovic, V. Z. [UNESP]Pavlovic, V. B. [UNESP]Pavlovic, V. P. [UNESP]Varela, José Arana [UNESP]2014-05-27T11:20:19Z2014-05-27T11:20:19Z2001-11-09info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/conferenceObject1425-1428http://dx.doi.org/10.4028/www.scientific.net/KEM.206-213.1425Key Engineering Materials, v. 206-213, n. II, p. 1425-1428, 2001.1013-9826http://hdl.handle.net/11449/6661210.4028/www.scientific.net/KEM.206-213.14252-s2.0-003478295619223571848427670000-0003-1300-4978Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengKey Engineering Materials0,180info:eu-repo/semantics/openAccess2024-06-28T13:55:20Zoai:repositorio.unesp.br:11449/66612Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T23:24:55.674627Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Screen printed barium titanate thick films prepared from mechanically activated powders
title Screen printed barium titanate thick films prepared from mechanically activated powders
spellingShingle Screen printed barium titanate thick films prepared from mechanically activated powders
Stojanovic, B. D. [UNESP]
Barium titanate
Microstructure
Properties
Screen-printed
Thick films
Mechanically activated powders
Dielectric films
Permittivity measurement
Powders
Scanning electron microscopy
Screen printing
title_short Screen printed barium titanate thick films prepared from mechanically activated powders
title_full Screen printed barium titanate thick films prepared from mechanically activated powders
title_fullStr Screen printed barium titanate thick films prepared from mechanically activated powders
title_full_unstemmed Screen printed barium titanate thick films prepared from mechanically activated powders
title_sort Screen printed barium titanate thick films prepared from mechanically activated powders
author Stojanovic, B. D. [UNESP]
author_facet Stojanovic, B. D. [UNESP]
Foschini, C. R. [UNESP]
Pejovic, V. Z. [UNESP]
Pavlovic, V. B. [UNESP]
Pavlovic, V. P. [UNESP]
Varela, José Arana [UNESP]
author_role author
author2 Foschini, C. R. [UNESP]
Pejovic, V. Z. [UNESP]
Pavlovic, V. B. [UNESP]
Pavlovic, V. P. [UNESP]
Varela, José Arana [UNESP]
author2_role author
author
author
author
author
dc.contributor.none.fl_str_mv Universidade Estadual Paulista (Unesp)
dc.contributor.author.fl_str_mv Stojanovic, B. D. [UNESP]
Foschini, C. R. [UNESP]
Pejovic, V. Z. [UNESP]
Pavlovic, V. B. [UNESP]
Pavlovic, V. P. [UNESP]
Varela, José Arana [UNESP]
dc.subject.por.fl_str_mv Barium titanate
Microstructure
Properties
Screen-printed
Thick films
Mechanically activated powders
Dielectric films
Permittivity measurement
Powders
Scanning electron microscopy
Screen printing
topic Barium titanate
Microstructure
Properties
Screen-printed
Thick films
Mechanically activated powders
Dielectric films
Permittivity measurement
Powders
Scanning electron microscopy
Screen printing
description Barium titanate thick films were prepared from mechanically activated powders based on BaCO 3 and TiO 2. The thick films were screen-printed on alumina substrates electroded with Ag/Pd. The BT films were sintered at 850°C for 1 hour. The thickness was 30-75 μm depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate was investigated by SEM. The dielectric properties were measured and the results were reported.
publishDate 2001
dc.date.none.fl_str_mv 2001-11-09
2014-05-27T11:20:19Z
2014-05-27T11:20:19Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/conferenceObject
format conferenceObject
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.4028/www.scientific.net/KEM.206-213.1425
Key Engineering Materials, v. 206-213, n. II, p. 1425-1428, 2001.
1013-9826
http://hdl.handle.net/11449/66612
10.4028/www.scientific.net/KEM.206-213.1425
2-s2.0-0034782956
1922357184842767
0000-0003-1300-4978
url http://dx.doi.org/10.4028/www.scientific.net/KEM.206-213.1425
http://hdl.handle.net/11449/66612
identifier_str_mv Key Engineering Materials, v. 206-213, n. II, p. 1425-1428, 2001.
1013-9826
10.4028/www.scientific.net/KEM.206-213.1425
2-s2.0-0034782956
1922357184842767
0000-0003-1300-4978
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Key Engineering Materials
0,180
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 1425-1428
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808129519029059584

Registros relacionados