Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip

Detalhes bibliográficos
Autor(a) principal: Simões, Rafael Plana [UNESP]
Data de Publicação: 2014
Outros Autores: Bianchi, Eduardo Carlos [UNESP], Oikawa, Marcos Hiroshi [UNESP], Aguiar, Paulo Roberto De [UNESP], Droppa Júnior, Roosevelt, Canarim, Rubens Chinali [UNESP]
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1590/1516-1439.250713
http://hdl.handle.net/11449/114337
Resumo: The current work presents a study of alternative methods of cooling-lubrication for the external plunge grinding of advanced ceramics using diamond wheels. These two alternative methods, which are intended to reduce cutting fluid expenses, are commonly referred to as the optimized cooling-lubrication method and minimal quantity of lubrication (MQL). The techniques were evaluated by process monitoring and by the assessment of output variables such as tangential cutting force, G ratio, roundness errors, surface roughness, microstructure and residual stresses measured by X-ray diffraction. The obtained results showed that the two proposed techniques can replace the conventional cooling-lubrication method, i.e., flood coolant. In particular, optimized cooling-lubrication method reduced wheel wear and produced workpieces with the best geometric and dimensional finishes, while MQL significantly reduced the amount of fluid employed in the process without harming the workpiece quality.
id UNSP_36f97a8185a6902b5e3c465e14052b7d
oai_identifier_str oai:repositorio.unesp.br:11449/114337
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dipgrindingadvanced ceramicscoolingminimum quantity lubrication (MQL)The current work presents a study of alternative methods of cooling-lubrication for the external plunge grinding of advanced ceramics using diamond wheels. These two alternative methods, which are intended to reduce cutting fluid expenses, are commonly referred to as the optimized cooling-lubrication method and minimal quantity of lubrication (MQL). The techniques were evaluated by process monitoring and by the assessment of output variables such as tangential cutting force, G ratio, roundness errors, surface roughness, microstructure and residual stresses measured by X-ray diffraction. The obtained results showed that the two proposed techniques can replace the conventional cooling-lubrication method, i.e., flood coolant. In particular, optimized cooling-lubrication method reduced wheel wear and produced workpieces with the best geometric and dimensional finishes, while MQL significantly reduced the amount of fluid employed in the process without harming the workpiece quality.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Universidade Estadual Paulista Júlio de Mesquita Filho Faculdade de Ciências AgronômicasUniversidade Estadual Paulista Júlio de Mesquita Filho Faculdade de EngenhariaUniversidade Federal do ABC Centro de Ciências Naturais e HumanasUniversidade Estadual Paulista Júlio de Mesquita Filho Faculdade de Ciências AgronômicasUniversidade Estadual Paulista Júlio de Mesquita Filho Faculdade de EngenhariaABM, ABC, ABPolUniversidade Estadual Paulista (Unesp)Universidade Federal do ABC (UFABC)Simões, Rafael Plana [UNESP]Bianchi, Eduardo Carlos [UNESP]Oikawa, Marcos Hiroshi [UNESP]Aguiar, Paulo Roberto De [UNESP]Droppa Júnior, RooseveltCanarim, Rubens Chinali [UNESP]2015-02-02T12:39:27Z2015-02-02T12:39:27Z2014-10-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article1201-1212application/pdfhttp://dx.doi.org/10.1590/1516-1439.250713Materials Research. ABM, ABC, ABPol, v. 17, n. 5, p. 1201-1212, 2014.1516-1439http://hdl.handle.net/11449/11433710.1590/1516-1439.250713S1516-14392014000500013S1516-14392014000500013.pdf1099152007574921145540030966008118628148275906320000-0002-9934-44650000-0002-3433-8574SciELOreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengMaterials Research1.1030,398info:eu-repo/semantics/openAccess2024-06-28T13:54:59Zoai:repositorio.unesp.br:11449/114337Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T20:37:29.902111Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
title Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
spellingShingle Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
Simões, Rafael Plana [UNESP]
grinding
advanced ceramics
cooling
minimum quantity lubrication (MQL)
title_short Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
title_full Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
title_fullStr Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
title_full_unstemmed Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
title_sort Evaluation of different methods of cooling-lubrication in cylindrical grinding of advanced ceramic dip
author Simões, Rafael Plana [UNESP]
author_facet Simões, Rafael Plana [UNESP]
Bianchi, Eduardo Carlos [UNESP]
Oikawa, Marcos Hiroshi [UNESP]
Aguiar, Paulo Roberto De [UNESP]
Droppa Júnior, Roosevelt
Canarim, Rubens Chinali [UNESP]
author_role author
author2 Bianchi, Eduardo Carlos [UNESP]
Oikawa, Marcos Hiroshi [UNESP]
Aguiar, Paulo Roberto De [UNESP]
Droppa Júnior, Roosevelt
Canarim, Rubens Chinali [UNESP]
author2_role author
author
author
author
author
dc.contributor.none.fl_str_mv Universidade Estadual Paulista (Unesp)
Universidade Federal do ABC (UFABC)
dc.contributor.author.fl_str_mv Simões, Rafael Plana [UNESP]
Bianchi, Eduardo Carlos [UNESP]
Oikawa, Marcos Hiroshi [UNESP]
Aguiar, Paulo Roberto De [UNESP]
Droppa Júnior, Roosevelt
Canarim, Rubens Chinali [UNESP]
dc.subject.por.fl_str_mv grinding
advanced ceramics
cooling
minimum quantity lubrication (MQL)
topic grinding
advanced ceramics
cooling
minimum quantity lubrication (MQL)
description The current work presents a study of alternative methods of cooling-lubrication for the external plunge grinding of advanced ceramics using diamond wheels. These two alternative methods, which are intended to reduce cutting fluid expenses, are commonly referred to as the optimized cooling-lubrication method and minimal quantity of lubrication (MQL). The techniques were evaluated by process monitoring and by the assessment of output variables such as tangential cutting force, G ratio, roundness errors, surface roughness, microstructure and residual stresses measured by X-ray diffraction. The obtained results showed that the two proposed techniques can replace the conventional cooling-lubrication method, i.e., flood coolant. In particular, optimized cooling-lubrication method reduced wheel wear and produced workpieces with the best geometric and dimensional finishes, while MQL significantly reduced the amount of fluid employed in the process without harming the workpiece quality.
publishDate 2014
dc.date.none.fl_str_mv 2014-10-01
2015-02-02T12:39:27Z
2015-02-02T12:39:27Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1590/1516-1439.250713
Materials Research. ABM, ABC, ABPol, v. 17, n. 5, p. 1201-1212, 2014.
1516-1439
http://hdl.handle.net/11449/114337
10.1590/1516-1439.250713
S1516-14392014000500013
S1516-14392014000500013.pdf
1099152007574921
1455400309660081
1862814827590632
0000-0002-9934-4465
0000-0002-3433-8574
url http://dx.doi.org/10.1590/1516-1439.250713
http://hdl.handle.net/11449/114337
identifier_str_mv Materials Research. ABM, ABC, ABPol, v. 17, n. 5, p. 1201-1212, 2014.
1516-1439
10.1590/1516-1439.250713
S1516-14392014000500013
S1516-14392014000500013.pdf
1099152007574921
1455400309660081
1862814827590632
0000-0002-9934-4465
0000-0002-3433-8574
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Materials Research
1.103
0,398
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 1201-1212
application/pdf
dc.publisher.none.fl_str_mv ABM, ABC, ABPol
publisher.none.fl_str_mv ABM, ABC, ABPol
dc.source.none.fl_str_mv SciELO
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808129229352599552