Um estudo sobre a corrosão aquosa de ligas de alumínio 7xxx submetidas a diferentes tratamentos térmicos

• Autor(a) principal: Pereira, Marinalda Claudete [UNESP]
• Data de Publicação: 2002
• Outros Autores: Dutra, Conceição Aparecida Matsumoto [UNESP], Dos Santos Rodrigues, Domingos Sávio [UNESP], Codaro, Eduardo Norberto [UNESP], Nakazato, Roberto Zenhei [UNESP]
• Tipo de documento: Artigo de conferência
• Idioma: por
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://hdl.handle.net/11449/67123
• topic: 7XXX series; Aeronautical materials; Corrosion; Aqueous corrosion; Composition; Electrochemistry; Hardness; Heat treatment; Polarization; Solutions; Spectroscopic analysis; Aluminum alloys

This job aim has been to study the aqueous corrosion of the 7xxx heattreatable aluminium alloys, used in the aeronautical industry. The 7010, 7050 and 7475 alloys, have been supplied in the T7 condition and submitted to the annealed and aging thermal treatments of in order to study their behaviours front to corrosion in 5% NaCl pH 6,0, air-saturated and deaerated solutions. The electrochemical study has been accomplished through potential measures in open circuit, potentiodynamic polarisation curves and electrochemical impedance spectroscopy (EIS). The aged alloy resulted to be the most resistant to corrosion and annealed the less resistant ones. In spite of it they have different chemical compositions, in each mean, the alloy with the same thermal treatment has behaved in a similar way. In aerated solution, the process is controlled by oxygen diffusion and in oxygen absence for dissolution through a film. Hardness and mass loss measures, after corrosion test, have supported this research.