Development of a new standard procedure for the evaluation of composite abrasive wear

Detalhes bibliográficos
Autor(a) principal: Bianchi, Eduardo Carlos [UNESP]
Data de Publicação: 2001
Outros Autores: Silva, Eraldo Jannone Da [UNESP], Monici, Rodrigo Daun [UNESP], Xavier, Alexandre Pegoraro [UNESP], Freitas, César Antunes De, Bianchi, Ana Rita Rodrigues
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1590/S1516-14392001000400009
http://hdl.handle.net/11449/212942
Resumo: This article discusses the development of a test bench and a methodology for the study of composite resin abrasive wear. To evaluate the operation of the test bench and to compare the proposed methodology with other existing ones, a study was made of the five composites most commonly used by dentists. The one-way ANOVA method and the Tukey test were used to statistically analyze the results by multiple comparisons of the groups of resins tested. Using the proposed methodology, these resins were classified in an increasing order of abrasive wear strength, as follows: Charisma (the lowest abrasive wear strength), Tetric, TPH, Herculite and Z-100 (the highest abrasive wear strength) (p < 0.05). In comparison to other methodologies, the results of the proposed methodology presented the lowest coefficient of variation.
id UNSP_49136ec65d2d11e83082747f24be2d48
oai_identifier_str oai:repositorio.unesp.br:11449/212942
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Development of a new standard procedure for the evaluation of composite abrasive wearabrasive wearcompositescomposite tribologyThis article discusses the development of a test bench and a methodology for the study of composite resin abrasive wear. To evaluate the operation of the test bench and to compare the proposed methodology with other existing ones, a study was made of the five composites most commonly used by dentists. The one-way ANOVA method and the Tukey test were used to statistically analyze the results by multiple comparisons of the groups of resins tested. Using the proposed methodology, these resins were classified in an increasing order of abrasive wear strength, as follows: Charisma (the lowest abrasive wear strength), Tetric, TPH, Herculite and Z-100 (the highest abrasive wear strength) (p < 0.05). In comparison to other methodologies, the results of the proposed methodology presented the lowest coefficient of variation.Universidade Estadual Paulista, Faculty of EngineeringUniversidade de São Paulo, Department of DentistryUniversidade Estadual Paulista, Faculty of EngineeringABM, ABC, ABPolUniversidade Estadual Paulista (Unesp)Universidade de São Paulo (USP)Bianchi, Eduardo Carlos [UNESP]Silva, Eraldo Jannone Da [UNESP]Monici, Rodrigo Daun [UNESP]Xavier, Alexandre Pegoraro [UNESP]Freitas, César Antunes DeBianchi, Ana Rita Rodrigues2021-07-14T10:47:28Z2021-07-14T10:47:28Z2001-10info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article273-278application/pdfhttp://dx.doi.org/10.1590/S1516-14392001000400009Materials Research. São Carlos, SP, Brazil: ABM, ABC, ABPol, v. 4, n. 4, p. 273-278, 2001.1516-14391980-5373http://hdl.handle.net/11449/21294210.1590/S1516-14392001000400009S1516-14392001000400009S1516-14392001000400009.pdfSciELOreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengMaterials Researchinfo:eu-repo/semantics/openAccess2024-06-28T13:54:49Zoai:repositorio.unesp.br:11449/212942Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T17:29:57.170978Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Development of a new standard procedure for the evaluation of composite abrasive wear
title Development of a new standard procedure for the evaluation of composite abrasive wear
spellingShingle Development of a new standard procedure for the evaluation of composite abrasive wear
Bianchi, Eduardo Carlos [UNESP]
abrasive wear
composites
composite tribology
title_short Development of a new standard procedure for the evaluation of composite abrasive wear
title_full Development of a new standard procedure for the evaluation of composite abrasive wear
title_fullStr Development of a new standard procedure for the evaluation of composite abrasive wear
title_full_unstemmed Development of a new standard procedure for the evaluation of composite abrasive wear
title_sort Development of a new standard procedure for the evaluation of composite abrasive wear
author Bianchi, Eduardo Carlos [UNESP]
author_facet Bianchi, Eduardo Carlos [UNESP]
Silva, Eraldo Jannone Da [UNESP]
Monici, Rodrigo Daun [UNESP]
Xavier, Alexandre Pegoraro [UNESP]
Freitas, César Antunes De
Bianchi, Ana Rita Rodrigues
author_role author
author2 Silva, Eraldo Jannone Da [UNESP]
Monici, Rodrigo Daun [UNESP]
Xavier, Alexandre Pegoraro [UNESP]
Freitas, César Antunes De
Bianchi, Ana Rita Rodrigues
author2_role author
author
author
author
author
dc.contributor.none.fl_str_mv Universidade Estadual Paulista (Unesp)
Universidade de São Paulo (USP)
dc.contributor.author.fl_str_mv Bianchi, Eduardo Carlos [UNESP]
Silva, Eraldo Jannone Da [UNESP]
Monici, Rodrigo Daun [UNESP]
Xavier, Alexandre Pegoraro [UNESP]
Freitas, César Antunes De
Bianchi, Ana Rita Rodrigues
dc.subject.por.fl_str_mv abrasive wear
composites
composite tribology
topic abrasive wear
composites
composite tribology
description This article discusses the development of a test bench and a methodology for the study of composite resin abrasive wear. To evaluate the operation of the test bench and to compare the proposed methodology with other existing ones, a study was made of the five composites most commonly used by dentists. The one-way ANOVA method and the Tukey test were used to statistically analyze the results by multiple comparisons of the groups of resins tested. Using the proposed methodology, these resins were classified in an increasing order of abrasive wear strength, as follows: Charisma (the lowest abrasive wear strength), Tetric, TPH, Herculite and Z-100 (the highest abrasive wear strength) (p < 0.05). In comparison to other methodologies, the results of the proposed methodology presented the lowest coefficient of variation.
publishDate 2001
dc.date.none.fl_str_mv 2001-10
2021-07-14T10:47:28Z
2021-07-14T10:47:28Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1590/S1516-14392001000400009
Materials Research. São Carlos, SP, Brazil: ABM, ABC, ABPol, v. 4, n. 4, p. 273-278, 2001.
1516-1439
1980-5373
http://hdl.handle.net/11449/212942
10.1590/S1516-14392001000400009
S1516-14392001000400009
S1516-14392001000400009.pdf
url http://dx.doi.org/10.1590/S1516-14392001000400009
http://hdl.handle.net/11449/212942
identifier_str_mv Materials Research. São Carlos, SP, Brazil: ABM, ABC, ABPol, v. 4, n. 4, p. 273-278, 2001.
1516-1439
1980-5373
10.1590/S1516-14392001000400009
S1516-14392001000400009
S1516-14392001000400009.pdf
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Materials Research
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 273-278
application/pdf
dc.publisher.none.fl_str_mv ABM, ABC, ABPol
publisher.none.fl_str_mv ABM, ABC, ABPol
dc.source.none.fl_str_mv SciELO
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808128818689343488