Estudio de PMN cerámico dopado con KNbO3 y LiNbO 3 sintetizado por Pechini

• Autor(a) principal: Cavalheiro, A. A.
• Data de Publicação: 2002
• Outros Autores: Zaghete, M. A., Paiva-Santos, C. O. [UNESP], Cilense, M., Varela, José Arana [UNESP]
• Tipo de documento: Artigo
• Idioma: spa
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://dx.doi.org/10.3989/cyv.2002.v41.i2.687; http://hdl.handle.net/11449/67087
• topic: Columbite; Ferroelectric; Pechini; PMN; Relaxor

PMN belongs to a special class of materials named relaxor ferroelectrics. It has high volumetric efficiency due to its high dielectric constant, which makes it in a perfect material for application in multilayer capacitors. When prepared the columbite route its preparation has many advantages. In this work, the preparations of columbite and PMN were done by Pechini and Partial Oxalate methods, respectively. The effects of the KNbO3 and LiNbO3 dopants added in various concentrations. The idea is founded on the correlations that they have with BaTiO3 y PbTiO3, respectively. The whole process was supervised by TG/DTA, XRD, SEM and determination of the specific surface area of the powders. LiNbO3 carries out the pre-sinterization of the particles, observed by a reduction in the surface area. There are not particle grow, but occur its lengthening. However, for KNbO3 these particle growth, but the agglomerates are softer. The effect produced by the doping during the synthesis of the PMN powder is different from the one produced in the columbite precursor. Pure precursor shows an average particle size of 0,2μm, but the addition of 5,0mol% of dopants carries out the formation of agglomerates close to 4μm. LiNbO 3 addition carries out spherical particles and pre-sinterization, while KNbO3 addition does not change the particles shape.