Influence of morphological variables in photoelastic models with implants submitted to axial loading

• Autor(a) principal: Gennari-Filho, Humberto [UNESP]
• Data de Publicação: 2014
• Outros Autores: Silva, Cristina Ramos [UNESP], Goiato, Marcelo Coelho [UNESP], Mazaro, José Vitor Quinelli [UNESP]
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://apcdaracatuba.com.br/revista/2014/10/v35n122014.htm; http://hdl.handle.net/11449/133251
• topic: Dental implantation; Dental prosthesis; Dental stress analysis; Implante dental; Prótese dental; Análise do stress dentário

Purpose: This study used 12 photoelastics models with different height and thickness to evaluate if the axial loading of 100N on implants changes the morphology of the photoelastic reflection. Methods: For the photoelastic analysis, the models were placed in a reflection polariscope for observation of the isochromatic fringes patterns. The formation of these fringes resulted from an axial load of 100N applied to the midpoint of the healing abutment attached to the implant with 10.0mm x 3.75mm (Conexão, Sistemas de Próteses, Brazil). The tension in each photoelastic model was monitored, photographed and observed using the software Phothoshop 7.0. For qualitative analysis, the area under the implant apex was measured including the green band of the second order fringe of each model using the software Image Tool. After comparison of the areas, the performance generated by each specimen was defined regarding the axial loading. Results: There were alterations in area with different height and thickness of the photoelastic models. It was observed that the group III (30mm in height) presented the smallest area. Conclusion: There was variation in the size of the areas analyzed for different height and thickness of the models and the morphology of the replica may directly influence the result in researches with photoelastic models.